Table of Contents
Advertisement
CHARGING
Indication Description
Error mode
1.
Desulphation
2.
Soft start
3.
Bulk
4.
Absorption
5.
Analyze
6.
Float
7.
Pulse
Power on
Error mode
The charger suspends the charging / voltage maintenance.
Reset
Error mode is acknowledged/reset by pressing the "RESET" button.
RESET
6
STEP 1:
DESULPHATION
Detects sulphated batteries. Pulsing current and voltage removes
sulphate from the lead plates of the battery restoring the battery
capacity.
STEP 2:
SOFT START
Tests if the battery can accept a charge. This step prevents charging a
defective battery.
STEP 3:
BULK
Charging with maximum current until approximately 80% battery
capacity.
STEP 4:
ABSORPTION
Charging with declining current to maximize up to 100% battery
capacity.
STEP 5:
ANALYZE
Tests if the battery can hold charge. Batteries that cannot hold
charge may need to be replaced.
STEP 6:
FLOAT
Maintains the battery voltage at maximum level by providing a
constant voltage charge.
STEP 7:
PULSE
Maintains the battery at 95–100% capacity. The charger monitors
the battery voltage and gives a pulse when necessary to keep the
battery fully charged.
Advertisement
Table of Contents
