Advertisement
Quick Links
Advertisement
Related Manuals for Logosol SMART SET
Summary of Contents for Logosol SMART SET
- Page 1 USER MANUAL Ref. no. 0458-395-5352 UP DOWN SMART SET AUTOMATION...
- Page 2 We are very pleased that you have demonstrated your confidence in us by purchasing this product, and we will do our utmost to meet your expectations. Logosol has been manufacturing sawmills since 1989. In that time we have supplied approximately 50,000 machines to satisfied customers the world over.
- Page 3 TABLE OF CONTENTS Safety instructions Start and stop Functions...
- Page 4 SAFETY INSTRUCTIONS KEY TO SYMBOLS WARNING! This symbol means that you Always use approved hearing protection should pay particular attention and is always when working with the machine. Even followed by information about the relevant short exposure to high frequency noise risk.
- Page 5 Always keep an ABC fire extinguisher Here is a description of the safety features of the (min. 3 kg) easily accessible at the worksite. Smart Set control, and their functions. Always keep a fully-stocked first-aid kit easily Emergency stop on the control unit accessible at the worksite.
- Page 6 START AND STOP START 1. Open the fuel valve by moving the fuel control lever to the right until it reaches the position ”ON”. 2. To start a cold engine, move the choke control lever to closed position (the control lever in its left position).
- Page 7 The control unit The control unit of the Logosol Smart Set has a display, a set of programs, setting keys, an enabling switch button and a control lever. To use a function you select the desired one on the control panel. Then, to be able to execute the command, the enabling switch button has to be pressed down at the same time as the operation is carried out by the control lever.
- Page 8 FUNCTIONS PROGRAM KEYS Up / Down Up / Down activates the ability to move the sawhead vertically. UP DOWN The feed key is used for running the sawhead back and Sawhead position / forth over the rails. Start Activates the engine to enabling sawing operation. The REV UP ENGINE engine revs up and then runs at working rpm until the control lever is released.
- Page 9 FUNCTIONS Calibration At each start-up, the machine asks for the measurement between the sawblade and the log bed. If the value shown on the display does not agree with the value on the machine scale, the calibration value has been changed and the machine has to be recalibrated. This operation is carried out in the calibration mode.
- Page 10 FUNCTIONS CANCEL COMMAND The calibration key has two functions; it also works as a command for cancelling a selected operation. Pressing this button returns the machine to standby mode. ENABLING SWITCH BUTTON The enabling switch button is the big button located below the control lever to the right of the control panel.
- Page 11 SETTING STEP MODE Set the Step mode by pressing down one of the step keys. This has to be done with the Smart Set in its standby mode. Keep the sawing dimension key pressed down and then enter the desired value using the control lever.
- Page 12 CUTTING A LOG The illustration below shows an examaple of a workflow, with the steps that are performed by the Smart Set during sawing. START POSITION To make a cut, begin by setting the Activate the feed and start the engine to Feed the blade through the log using sawblade to the desired height.
- Page 13 FUNCTIONS PERFORM FUNCTIONS To be able to run the different functions in Smart Set, you follow the steps as shown in the illustration below. Select the desired function on the keypad, Keep the enabling switch button pressed down. Carry out the selected operation with the help of the control lever.
- Page 14 FUNCTIONS SAWING DIMENSIONS The Smart Set interface can show different sawing dimensions and units to facilitate for the user in different situations. The default setting of the interface is showing an absolute measurement between the sawblade and the log bed in millimetres.
- Page 16 Fiskaregatan 2, 871 33 Härnösand, SWEDEN +46 611 182 85 | info@logosol.com | www.logosol.com...