Related Manuals for Gude GESF 400
Summary of Contents for Gude GESF 400
- Page 1 GESF 400 #94569 English GB Translation of original operating instructions ELECTRIC SNOW BLOWER © Güde GmbH & Co. KG - Birkichstrasse 6 - D-74549 Wolpertshausen - Deutschland...
- Page 4 Appliance description Use the right appliance! Do not use the appliance for purposes for which it has not GESF 400 electric snow blower with a 2-point safety been designed. switch with cable pull strain relief, flexible sliding post to save space for storing. Stable plastic wheels. Eject tube Look after your appliance! with continuous 2 x 90°...
- Page 5 appropriately. Replace any damaged parts before the • in accordance with the descriptions and safety appliance is put into operation if necessary. instructions mentioned in these Operating Snow should be removed only after adjusting the snow Instructions. blower to the outdoor temperature when there are extreme temperature differences.
- Page 6 Being careful prevents slipping or falling, especially when that, permit specific for the given country needs to be reversing. requested from appropriate authorities if necessary). Only fresh snow is used as the processed material. Safety operation instructions Do not put your hands and legs near the rotating parts. Any other use is in conflict with the designation.
- Page 7 Adjusting rodding for ejection opening Do not touch inside the Using indoor prohibited appliance Put the eye bolt on the rodding (pic. 8-1). Hook the rodding end on the pivot point and turn the rodding to fix it to the post (pic. 8-2). Secure the eye bolt on the bottom post with the wing nut (pic.
-
Page 8: Eu Declaration Of Conformity
Machine description: GESF 400 ELECTRIC SNOW BLOWER Article No. Faulty and/or disposed electric #94569 or electronic appliances must be taken to appropriate Applicable EU Directives: collection centres. 2006/42/ EG 2004/108 EG Package: 2000/14 EG 2002/95 EG Applicable harmonised standards: EN 60335-1:2002+A1+A11+A12+A2+A13... - Page 9 Loss of Ice surfaces Ensure the surface is Qualification stability under the snow adequate (gravelled). layer and the No special qualification is necessary for using the surface being appliance apart from detailed instruction by a qualified cleaned. person. Slipping, trip You may Ensure the surface is or fall of...
-
Page 10: Troubleshooting
Blower worm or eject Stop the Have the electric snow blower checked by a qualified channel is blocked. engine. Unplug authorised expert once a year. the appliance. Remove the Appliance not The appliance needs to be protected against moisture and blocking.
Need help?
Do you have a question about the GESF 400 and is the answer not in the manual?
Questions and answers