Advertisement
PAIRING YOUR DEVICE
Before using the Smart Connect™ app for the first time,
you will need to pair your device with the glider.
Open the Smart Connect™ app on your device. Be sure your device is within approximately
1,8 m (6 ft) of the glider to pair.
Press and hold the pairing button (power button) on the glider control panel for about
5 seconds. The glider stays in pairing mode for approximately 30 seconds.
Hint: If you cannot pair your device with the glider, try moving the device closer to
the glider.
The glider icon will be highlighted in green in the app when the glider is connected to your
device. This indicates that you can use your device to control the glider.
16
Advertisement
