Choosing a Program
The main screen shows 3 program categories:
IF - Induction Flux (PEMF) Therapy
CH - Chakra Therapy
BR - Bioresonance Therapy
Use the navigation buttons (4) to select the type of treatment you would like to use.
Press the OK button (3) to advance to the program options.
Induction Flux Therapy (PEMF)
Use the navigation (4) keys to select the desired program (If 1- 11). By pressing "OK" (3)
the program starts with the default intensity and time.
If you press and hold the "OK" button for 4 sec, the program intensity will be displayed.
You can increase or decrease the intensity by using the navigation keys. Press the
"OK" after you have selected the intensity. You can then use the navigation keys to
change the time in 10 minute intervals. You will have the option to begin the session
immediately by selecting the "Instant" option or you can select "Scheduled" to select
the time your program will begin.
Using the "Instant" option: press the "OK" key again to start the selected program
with the selected intensity and time.
If "Scheduled" is selected, press the "OK" button to set the start time for the
treatment session. The time will be in 24 hour time.
Pressing the "OK" button after selecting the scheduled time causes the display to
darken.
The session will start at the selected time.
P A G E 8 | Copyright © 2019 PEMF Supply LLC
Customizable Program IF11
IF 11 is the only fully customizable program: Once in IF11, you can customize
your settings. Press and hold the "OK" button for 3 seconds to get to the sub
menu. You can choose the waveform, frequency, polarity (positive, negative or
reversing polarity), or intensity by using the arrow keys to scroll through the
options.
Press the ok button each time to confirm your selection. Press the power
button briefly to go back to the previous screen. You have the option to select
"Immediate" to start the session right away or "Timing" to scheduled the session
to begin at later a later time. The scheduled time is displayed as 24 hour time.
While any session is in progress, you can push the ok button to pause and or
continue your session.
Chakra
Use the navigation (4) keys to select the desired program (Ch 1- 10). Press "OK" (3)to
start the program with the default intensity and time.
To increase or decrease the intensity press the "OK" button and hold for 4 seconds. Use
the navigation keys to set a higher or lower intensity.
Press Ok to start the set program with the selected intensity.
Bio Resonance
Use the navigation (4) keys to select the desired program (Br 1- 17). Press "OK" (3) to
start the program with the default intensity and time. To increase or decrease the
intensity press the "OK" button and hold for 4 seconds. Use the navigation keys to set a
higher or lower intensity.
Press Ok to start the set program with the selected intensity.
P A G E 9
Need help?
Do you have a question about the Pro 3.0 and is the answer not in the manual?