Advertisement
Available languages
Available languages
Important safety instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with dry cloth.
Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not ope rate normally, or has been dropped.
No naked flame sources, such as lighted candles should be placed on
the apparatus.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following
table provides information on the frequency bands used and the
maximum RF transmit power of the product for sale in the EU:
Frequency range (MHz)
2402~2480MHz
The product firmware is available for download from the Beoplay App.
Software / Firmware: V2.03
Accessories: Beoplay H9i unit, USB Cable, Audio cable, Flight adaptor,
Quick start guide & Important Information.
The product to be sold in all European Union member and EFTA
countries.
Hereby, Bang & Olufsen a/s declares that the radio
equipment type Beoplay H9i is in compliance with
Directive 2014/53/EU. The full Declaration of Conformity
can be found at the following web site: http://www.
beoplay.com/H9i/learnmore
Max. Transmit Power (dBm)
5.94dBm±2dBm
4
Advertisement
