Advertisement
EXTREME COLD
What to look for: Opaque textured and unusually hard vinyl, brittle surface.
Causes: Deploying the Solar Sun Rings during periods of freezing or below
freezing temperatures.
Prevention: If freezing weather is in the forecast, store the Solar Sun Rings
in a dry area that will remain above freezing. Please refer to the Storage Guide
section on page 10 for more information.
UNDER INFLATION
What to look for: Ring begins to sink. Layers in the inner grid stick together.
Wrinkling or folds won't relax. Little or no heat output.
Causes: Inner grid and/or outer ring are under inflated causing inadequate
contact with water.
Prevention: Inflate to correct size. Refer to instructions for proper inflation
procedures. Please refer to instructions on page 8 for proper inflation.
13
Advertisement
