Advertisement
COMMON DAMAGE ASSETMENT GUIDE
12
SUN BURN
What to look for: Brown spots developing on top layer. Grey charred areas
that feel hard and crack when folded or when touched.
Causes: Burning caused by overlappiug over other rings or from stacking in
direct sunlight.
Prevention: Connect rings with magnets on corners and refrain from over-
lapping. Store in a cool and fully shaded area with no direct sunlight.
OVER INFLATION
What to look for: Round pillow top look to surface. Curling or waving of
outer ring Little or no heat produced.
Causes: Inner grid and/or outer ring are over inflated causing inadequate
contact with water.
Prevention: Insert deflation stem on valve until defalted to correct size.
Please refer to instructions on page 8 for proper inflation.
Advertisement
