Table of Contents
Advertisement
Installation
Instructions for Installation
WARNING: DO NOT penetrate any screws into the range hood
body as this may result in electrical hazards.
Only use the holes provided for mounting to the wall or cabinet
above.
WARNING: Failure to install the screws or fixing device in
accordance with these instructions may result in electrical
hazards.
If a connection flue composed of two parts is used, the upper part
must be placed outside the lower part.
Exhaust air must not be discharged into a flue which is used for
exhausting fumes from appliances burning gas or other fuels.
Installation must comply with any local regulations concerning the
discharge of exhaust air.
Before proceeding with the assembly, remove the anti-grease
filter(s) (Fig.5) so that the unit is easier to handle. Prepare the hole
in the ceiling or wall for the evacuation of the air.
Fig.5
14
Hide quick links:
Advertisement
Table of Contents
