How To Join The Product Assembly To The Wall To Protect The Set Tumbling - LG 42LC2R Series Owner's Manual

HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO
PROTECT THE SET TUMBLING
Set it up close to the wall so the product doesn't fall over when it is pushed backwards.
The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the
product doesn't fall over when it is pulled in the forward direction. It will prevent the product from falling
forward and hurting people. It will also prevent the product from damage caused by fall. Please make sure
that children don't climb on or hang from the product.
1
1 Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
2
the wall. Match the height of the bracket that is mounted on the wall.
3
3 Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is
safer to tie the rope so it becomes horizontal between the wall and the product.
!
NOTE
When moving the product to another place undo the ropes first.
G G
Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
G G
To use the product safely make sure that the height of the bracket that is mounted on the wall is same as
G G
that of the product.
or
2
3
1
2
15