Standalone Operation; Automatic - Venue Lighting Effects revolver laser Manual

Control Panel Menu Selections (Continued)
White Color
Balance
Setting
Reset
Pan/Tilt Fine-Tuning Function
To fine-tune the pan or tilt position of the fixture, follow the steps below:
1. Press <MENU> until "PInt" or "tInt" appears on the LED screen.
2. Press and hold <ENTER> until the display reverts to either "PInt" or "tInt".
3. Press <ENTER>.
4. Using <UP> and <DOWN>, adjust the fine-tuning of your tilt or pan position between -127 – 127.
5. Press <ENTER> to confirm settings.

STANDALONE OPERATION

Automatic

This fixture has 11 preprogrammed chases. These are accessed via the Control Display (page 6).
The speed can be adjusted between a slow pan and quick sequences.
1. Press <MENU> until "ShnD" appears on the LED screen.
2. Press <ENTER>.
3. Using <UP> and <DOWN>, select the desired program (Sh0–Sh10).
4. Press <ENTER>.
5. Press <MENU> until "Auto" appears on the LED screen.
6. Using <UP> and <DOWN>, select "on" to enable quick movement sequences,
or "oFF" to enable a slow pan.
7. Press <ENTER> to confirm settings.
12
MAIN FUNCTION
FUNCTION
bALA
rSet
SUB-
SELECTION
Red 1
Green 1
Blue 1
INSTRUCTION
Manually alter white color balance,
specifying values between 125 - 255
for all options.
When this menu option is selected,
the light will briefly reset, and factory
settings will be implemented.
Venue Revolver Laser Manual