TiVo Roamio OTA VOX Setup Manual page 3

Setup Instructions
1
2. HDMI
1. Antenna
Connect an HD
Connect an HDMI
antenna (sold
cable.
separately) to the
CABLE/ANT port
of the TiVo Roamio
OTA VOX.
TO USE VOICE COMMANDS, YOU MUST CONNECT THE USB
EXTENSION CABLE WITH THE USB ADAPTER ATTACHED.
2 4
® 3. Remote
Connect the included
USB extension cable
(connected to the USB
adapter) to enable the
voice remote. After
completing steps 4 and
5, place the adapter
close to the front of
the TiVo Roamio OTA
VOX (on top of or
beside the box).
3 5
4. Home Network
Wireless—Your TiVo Roamio OTA VOX has
built-in wireless capability.
Note: A wireless connection does not support a
multi-device setup. For additional guidance on
installing multiple TiVo devices in your home,
visit www.tivo.com/howto/homenetwork.
or
Ethernet—Connect your Ethernet cable
(recommended setup).
Note: Please make sure the Ethernet cable
is Cat5e. For more networking options, visit
www.tivo.com/howto.
5. Power
Plug in the power cord.
When you see the
"Welcome" screen,
you're ready to complete
Guided Setup.