OPOMBA
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the battery.
2. Remove the
base
panel.
3. Follow the procedure from step 1 to step 3 in "Removing the
4. Remove the keyboard.
Procedure
1. Lift the latch and disconnect the touch-pad cable from the system board.
2. Lift the latch and disconnect the power-button cable from the system board.
3. Remove the screws that secure the palm-rest assembly to the computer base.
1. power-button cable
3. palm-rest assembly
5. latch
24
Odstranjevanje naslona za dlani
Odstranjevanje naslona za dlani
computer. After working inside your computer, follow the instructions in
hard
drive".
2. screws (7)
4. touch-pad cable
15
After