1. Manuals
  2. Brands
  3. TAGSON Manuals
  4. Packaging equipment
  5. PS-1
  6. Manual

TAGSON PS-1 Manual

Automated socks packaging machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Automated
socks packaging
machine
PS-1

Advertisement

Table of Contents
loading

Related Manuals for TAGSON PS-1

Summary of Contents for TAGSON PS-1

  • Page 1 Automated socks packaging machine PS-1...

  • Page 2: Table Of Contents

    Maintenance Spare parts list Trouble shooting Contact information Technical information SOCKS PACKAGING MACHINE TYPE: PS-1 Air pressure: 6 bar / 80 psi Production year: 2016 Made in Slovenia ( EU ) Distributor: Stular plus Ltd, Koroska cesta 26 4000 Kranj, Slovenia...

  • Page 3: Introduction

    SPU module can tag or pack cards with socks, fasten price, size and brand name tags to fabrics by inserting plastic fasteners through the tag and the underlying fabric or material. The main purpose of TAGSON PS-1 is to be used in packaging applications.

  • Page 4: Important Safety Instructions

    Important safety instructions This manual contains essential information for the protection of users and others from possible injury and/or equipment damage. Read this manual before using the product, to ensure correct handling, and read the manuals of related apparatus before use. Keep this manual in a safe place for future reference.
  • Page 5 CAUTION: Improper use of lubricants may cause machine failure and/or damage to the product. → Do not use any type of lubricant on the fastener path. Use only compressed air to clean. → Do not use any solvents on the Swiftach Power Unit. Only trained personnel should operate pneumatically operated machinery and equipment.
  • Page 6 PS-1 (front view) 1 Height adjustment screw 2 Locking screws for height adjustments 3 Ejector rod switch 4 Ejector rod timing adjustment screw 5 Eye protection glass 6 SwifTach Power Unit (SPU) 7 Compressing ski foot 8 Card holder 9 Needle plate...
  • Page 7 PS-1 (back view) 12 Handle 13 Air blow gun 14 Knob for air level pressure 15 Air filter regulator 16 The main air connector 17 Speed adjustments screw 18 Main air valve ON/OFF for the air supply...

  • Page 8: Installation Of Air Supply

    Installation of air supply WARNING! Turn off air supply before beginning installation. Before the first use: → Read safety and manual instructions. → Take the machine out of the box and put it on the flat solid surface. → Close main air valve on the machine before connecting air supply.

  • Page 9: Swiftach Power Unit (Spu) Module

    Swiftach power unit (SPU) by Avery Dennison TAGSON tagging machine has built-in your desired Swiftach Power Unit (module). By changing the modules you also change type of the fasteners. The module is the main device that runs fasteners through the power unit. It is pneumatically operated and uses an air range between 40 and 100 psi.
  • Page 10 NOTE: Machine has an ejector rod switch in the front right upper corner. By pressing and holding the switch, you will activate the ejector rod. Holding the switch with one hand, one may safely remove the fastener clip from the module with the other hand. 3.

  • Page 11: Adjustments

    Adjustments 1. HEIGHT ADJUSTMENTS Adjust height of the module as needed for your application. The module is adjusted by loosening the front four screws . By turning the support bracket screw on the top of the machine, you can easily adjust the height of the module by sliding the entire assembly up or down to the correct height.

  • Page 12: Parts Replacement

    Replacements 1. REPLACING THE NEEDLE Needles may wear out or damage over time, and they should be visually checked regularly to ensure that the point is not bent, distorted, blunt or burred in any way, and that the shaft is straight. A damaged needle will damage fabric, so be sure to check thoroughly.
  • Page 13 1. Insert the replacement needle with the needle guard attached. 2. Align the slot in the needle with the slot in the tool. 3. Return the needle lock to the original locked position as shown. 4. Check that the needle is secure by pulling on the needle’s shaft. 5.

  • Page 14: Maintenance

    Air supply should be regulated by a filter/regulator set at the appropriate pressure (80 psi). Spare parts list The spare parts list only applies to the Tagson PS-1 machine without Swiftach Power Unit (SPU). For the SPU spare parts list, please see the manual for SPU. Item...

  • Page 15: Trouble Shooting

    Trouble shooting This chapter describes symptoms, possible causes and solutions to problems one may encounter when operating the Tagson tagging machine. Symptom Cause Action Fasteners breaking Fastener size too small Use larger fastener regarding sock thickness Card stock too tough...

  • Page 16: Contact Information

    STULAR PLUS LTD Koroska cesta 26 SI-4000 Kranj Slovenia, Europe Tel. 00386 59 049 860 Mail: info@stular.com...

Table of Contents