Update Mobile Hotspot Software And Firmware; Update Mobile Hotspot Software And Firmware In Response To An Alert - NETGEAR Nighthawk 5G User Manual

The home page displays.
4. Select Settings > Advanced Settings > Other.
The mobile hotspot page displays.
5. Scroll down to display the DMZ section.
6. Select the DMZ Enabled On radio button.
7. In the DMZ Address field, enter the IP address of the computer to which you want
all data sent.
If the mobile hotspot is tethered using a USB cable, this address is 192.168.1.4. If
the mobile hotspot is connected using Wi-Fi, the first Wi-Fi client's IP address is
usually 192.168.2.XX.
8. Click the Save button.
Your settings are saved.
Update Mobile Hotspot Software and
Firmware
The mobile hotspot automatically checks for new software or firmware updates once a
week. If an update becomes available, the mobile hotspot displays an alert. You can
also check for updates manually without receiving an alert.
Update Mobile Hotspot Software and Firmware in Response
to an Alert
To update the mobile hotspot software or firmware in response to an alert:
1. To wake the device, press the Power button.
The home screen displays.
2. Press the Power button again.
The alert message displays.
Maintain Your Mobile Hotspot
Nighthawk 5G Mobile Hotspot
48 User Manual