Vika-Shield Cabinet; Filter Cleaning - Viking Plug-n-Play Spas Series Owner's Manual

SP C BINET
ll Viking spas have a standard synthetic wood cabinet. This material
is virtually maintenance free and does not require any type of sealant
or treatment.
FILTER CLE NING
Your filter should be replaced once a year. When filters are removed
from the spa, make sure that no objects fall into the filter cavity. They
can cause obstruction to water movement. Remove filter cartridges as
shown in figure below.
The filter must be cleaned every 2 months, more often with heavy use,
to get rid of objects and particles that are lodged in the filter pleats.
Using a garden hose with a pressurized nozzle, push water from the
inside to the outside of the filter pleats forcing all trapped particles out.
If the filter is too dirty to be cleaned as described above, obtain filter
cleaner material from your Viking Spa Retailer. Soak the filter
overnight; then hose it down.
. Locate skimmer. B. Pull weir door open.
C. Remove basket. D. Remove the two separate filters
and follow cleaning instructions above.
17