Diagnostic Messages - Viking Plug-n-Play Spas Series Owner's Manual

Table of Contents

Advertisement

DI GNOSTIC MESS GES
Message Meaning
_ _
HH
OH
IC
S
SB
Sn
12
Temperature Unknown
"Overheat" – The spa
has shut down.
One of the sensors has
detected 118°F/48°C
at the heater.
"Overheat" – The spa
has shut down. One of Remove the spa cover and
the sensors has detected allow the water to cool. t
that the spa water is
110°F/43°C.
"Ice" – Potential freeze
condition detected.
The spa has shut down. If the problem persists, contact
The sensor that is
plugged into the
Sensor " " jack is not
working.
The spa has shut down. If the problem persists, contact
The sensor that is
plugged into the
Sensor "B" jack is not
working.
Sensors are out of
ction Required
fter the pump has been
running for 2 minutes, the
temperature will be displayed.
DO NOT ENTER THE W TER.
Remove the cover and allow
water to cool. Reset by pushing
any button.
DO NOT ENTER THE W TER.
107°F/42°C the spa should
automatically reset. If it does not,
shut off the power to the spa and
call your dealer or service
organization.
No action required. The pump(s)
will automatically activate
regardless of spa status.
your dealer or service organ-
ization. (May appear temporari-
ly in an overheat situation and
disappear when the heater cools.)
your dealer or service organ-
ization. (May appear temporari-
ly in an overheat situation and
disappear when the heater cools.)
If the problem persists,

Advertisement

Table of Contents
loading

Table of Contents