Advertisement
INSTALLATION INSTRUCTIONS
3-Circuit Recessed Flanged Track System
Model: WT1M/2M/3M-RT-2
Option B: Feed from the track pathway.
1. Drill a hole in the centre of the track (Diameter
16mm).
2. Assemble WMD, Turn the knob 90 degrees
clockwise.
MAXIMUM LOAD
The drawings below show the maximum permissible mechanical load by W tracks for luminaires or other
loads in relationship to the fixation or suspension point. It includes both of the weights of the track system.
WIRING OPTIONS
1. Feed 3-circuit ( Three-phase four-wire)
The circuit diagram is shown in figure A
Input V:
Current max:
Load max:
Useable wire:
2. Feed single circuit
The circuit diagram is shown in figure B
Input V:
Current max:
Load max:
Useable wire:
Headquarters
44 Harbor Park Drive, Port Washington, NY
Phone (516) 515.5000 • Fax (516) 515.5050
www.waclighting.com
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. April 22, 2019
380-420V~50/60Hz
3 x 16A
3 x 3840=11520W
2
5 x 1.5 mm
min
220-240V~50/60Hz
16A
3840W
2
3 x 1.5 mm
min
WAC Lighting (Shanghai)
14 Lane 299, Bi Sheng Road Shanghai 201204
Phone (86.21) 3393.3558 • Fax (86.21) 3362.1598
www.waclighting.com.cn
3. Wiring and installing junction.
A
3 x 240V~max
B
240V~max
WAC Lighting - International sales
Room 3207-3208, Building 4,Tian An Cloud Park,
ShenZhen, Guangdong 518129
www.waclighting.io
Wiring Diagram
4 / 6
Advertisement
