Advertisement
INSTALLATION INSTRUCTIONS
3-Circuit Recessed Flanged Track System
Model: WT1M/2M/3M-RT-2
FIELD CUTTING
Cut the track, insulation material, and copper busbars / Stem with one straight cut and remove any burrs that
may have resulted from the cut.
FEED OPTIONS:
• Make sure power is off before wiring.
• Note the polarity indicator of the track and accessories.
Option A: Feed end connector (WEDL/WEDR).
1
3
Headquarters
44 Harbor Park Drive, Port Washington, NY
Phone (516) 515.5000 • Fax (516) 515.5050
www.waclighting.com
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. April 22, 2019
2
4
WAC Lighting (Shanghai)
14 Lane 299, Bi Sheng Road Shanghai 201204
Phone (86.21) 3393.3558 • Fax (86.21) 3362.1598
www.waclighting.com.cn
Tips:
- Feed power through the end:
The end of the plastic cover must be removed and
replaced with a rubber ring.
- Feed power throug the bottom:
The bottom cover must be pushed away.
WAC Lighting - International sales
Room 3207-3208, Building 4,Tian An Cloud Park,
ShenZhen, Guangdong 518129
www.waclighting.io
3 / 6
Advertisement
