1- STORAGE AND HANDLING Storage temperature: -15°C to +50°C. The non-packaged pump must be stored according to the diagram in Fig.1 to prevent possible misalignment. The pump must not be exposed to direct sunlight. Any operation required on the pump must be carried out by qualified personnel after disconnection from the mains.
fastened to one of the connection holes on the head whether using plastic or metal delivery pipes. 6- ELECTRICAL CONNECTION The motor must be only started by trained and expert personnel. The electrical connections must be performed by expert personnel. The O3-H3 PSC single-phase motors require a starting capacitor (Fig.
9- TROUBLESHOOTING PROBLEM CHECKS SOLUTIONS 1- The motor does not start A- Check that the motor is powered. A- Check the fuses or re set the or the pump does not deliver B- Check the presence of all the phases for switch.
Products: QPGo.P - QPGo.X - QPJet.P - QPJet.X- P..03 - P..H3 - P..OT - P..HTF- X..03 - X..H3 - X..OT - X..HTF: ZDS srl declares, under its sole responsibility that the above- mentioned products to which this declaration refers, comply...
Page 11
Congratulations on your purchase of a high quality ZDS Product made in Italy. To our knowledge, ZDS is the only pump manufacturer which truly offers a 24 Months "No Quibble Guarantee" on its entire product range. Regardless of what problem you or your client encounters, we will replace the product, with no questions asked, up until 24 months after purchase.
Page 12
“No Quibble Guarantee” on the entire product portfolio. As far as we are aware, ZDS is the only company to offer this guarantee. It simply means that regardless of what problem you or your client encounters, we will replace the product with no questions asked up until 24 months after purchase.