Sony SU-B551S Manual page 8

Attach the supplied Joint to the
4
rear of the TV with the three
screws (PSW5 × 16) (supplied).
Slide the supplied Joint up to attach.
Joint Screw
(PSW5 × 16)
~
• Make sure to keep the removed screws.
• When removing the Table-Top Stand from the Display, lay
the display face down on a stable work surface that is larger
than the Display.
• To prevent damaging the surface of the LCD display, make
sure to place a soft cloth on the work surface.
CAUTION
• If pressure or shock is applied to the surface of the Display,
the LCD display may break or become damaged.
• Lay the display face down on a stable and level surface
with the Table-Top Stand hanging over the edge of the
surface.
Having the display face and the base of the Table-Top
Stand on the same level surface will create an unstable
working condition and can damage the Display.
Install the TV onto the TV Stand.
5
The TV is installed by placing it in the groove of the
TV Stand.
Arrow direction shows front of the TV Stand.
8
(GB)
6
Joint
7
Secure the TV and the TV Stand
with the three TV Stand Neck
Attachment Screws (PSW5 × 16)
(supplied).
TV Stand Neck
Attachment
Screw
(PSW5 × 16)
Attach the Rear Cover to the TV
Stand. (For SU-B551S model
only)
Rear Cover