Download Print this page
LEGRAND Btcino H4648 Quick Start Manual
LEGRAND Btcino H4648 Quick Start Manual

LEGRAND Btcino H4648 Quick Start Manual

Rfid key card switches
Hide thumbs Also See for Btcino H4648:

Advertisement

Quick Links

BUS SCS
RFID key card switches
Description
RFID key card switch for the connection of the power supply to the hotel room
(13.56 MHz frequency key card detection). Thanks to the LED backlit slot, the device
can be found in the dark. An automatic switch off delay can also be set.
It can be used with key cards with sizes between 45 mm and 54 mm (ISO).
The device can be configured in two different ways:
- Physical configuration, by inserting the configurators in the appropriate housings.
- Configuration using the MyHOME_Suite software, which can be downloaded from
the website www.homesystems-legrandgroup.com; this last type of configuration
has the advantage of offering many more options when compared with the physical
configuration.
Technical data
Power supply from SCS BUS:
18-27 Vdc
Max. absorption:
6 mA
Stand-by absorption:
5 mA
Operating temperature:
5 – 40 °C
RFID key card frequency:
13.56 MHz
Standards, Certifications, Marks
EN 60669-2-1
EN 50491-5-1
EN 50428
Dimensional data
Size: 2 flush mounted modules
Front view
3
Rear view
Legend
1.
Programming key: Learn IN
Programming key: Learn OUT
2.
3.
LED
Configurator socket
4.
5.
SCS BUS connector
MM00771-a-EN
02/12/2013
H4648
0 675 66
5 727 36
LN4648
5 722 36
1
2
4
5
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Btcino H4648 and is the answer not in the manual?

Questions and answers

Summary of Contents for LEGRAND Btcino H4648

  • Page 1 BUS SCS H4648 0 675 66 RFID key card switches 5 727 36 LN4648 5 722 36 Description Front view RFID key card switch for the connection of the power supply to the hotel room (13.56 MHz frequency key card detection). Thanks to the LED backlit slot, the device can be found in the dark.
  • Page 2 BUS SCS H4648 0 675 66 RFID key card switches 5 727 36 LN4648 5 722 36 Ethernet connection to the system Physical configuration Two modes: Ethernet network - CENTRALIZED, to recall scenarios managed by the scenario programmer. When HUB Switch the key card is inserted and removed, the device forwards a signal to the scenario MH201 programmer, which depending on the scenarios set will activate the corresponding...
  • Page 3 230 V 50 Hz To the fan-coil or temperature control system Heating Cooling Ethernet network GS (TM+EL) Magnet Contact F430R8 Magnet Contact HUB Switch Protection MH201 To other NC contact line room services LOAD = – 3513 DC - In MH201 Ethernet ROOM...

This manual is also suitable for:

Btcino ln4648