Table of Contents
Advertisement
Figure 42. ESXi web interface—Edit settings page
5
In the Edit Port Group window, enter the Management VLAN ID, and then click Save.
CAUTION:
Leaving the VLAN ID at default setting causes pre-deployment validation to fail during a later step.
6
In the Navigator pane, click Manage to set up the NTP.
7
In the right pane, click Time & Date.
8
Click Edit Settings and then select Use Network Time Protocol (enable NTP client).
9
From the NTP Service Startup Policy list, select Start and stop with host.
10
In the NTP Servers box, enter the NTP server IP addresses.
NOTE:
If multiple IP addresses are provided, separate the IP addresses with commas.
11
Click Save.
Deploy ESXi to cluster nodes
71
Advertisement
Table of Contents
