There are multiple configurations of Cloud Foundation on PowerEdge MX7000 chassis that are described in this document. The Cloud
Foundation software addresses the host servers using their IP Address. Deploying compute sleds across multiple PowerEdge MX7000
chassis has no impact on the software as long as the networking is configured properly on the Networking IO modules and the switches to
which the PowerEdge MX7000 chassis connects. The physical layout and resulting cabling is impacted by the number of PowerEdge
MX7000 chassis in use but no other changes are made in the environment.
Topics:
•
Configuration options
•
Cabling
Configuration options
Option 1—single PowerEdge MX7000 enclosure
•
One Dell EMC PowerEdge MX7000 enclosure
•
Four Dell EMC PowerEdge MX740c compute sleds
•
Two Dell EMC Networking MX5108n Ethernet switches
Figure 13. Single PowerEdge MX7000 enclosure
Option 2—single PowerEdge MX7000 with MX5016s storage
sled
•
One Dell EMC PowerEdge MX7000 enclosure
•
Four Dell EMC PowerEdge MX740c compute sleds
•
Two Dell EMC Networking MX5108n Ethernet switches
•
Two Dell EMC PowerEdge MX5016s storage sleds
•
Two Dell EMC PowerEdge MX5000s SAS IO Modules
22
Physical layout
Physical layout
6