Schaudt LT 45 Series Installation Instructions Manual page 3

4.5*
30**
9310330 MA /EN
Installation Instructions Operator and control panel LT 45X
2 Introduction
These installation instructions are aimed at trained personnel.
They contain important informationon the connection and safe operation of
the device. The safety informationprovided must be observed.
3 Mechanical installation
Plug connectors Attachment clip
Fig. 1 Dimension diagram for LT 45X control and switch panel (dimensions in mm)
* Dimensions for furniture cut-out,installation depth 10 mm, plug-inconnector 30 mm
** Dimensions for centring of the 4 holes of the attachment clips
The device is intended for installation into the front of a piece of furniture.
Date: 12.07.2018
(180)
171*
120**
Material thickness near
holes 9 ... 12 mm
10 (4x)*
Corner
cutout
possible
3