Before First Use; Note; Unpacking; Power Supply - Telefunken R900 Instruction Manual

3.

bEFoRE FIRsT UsE

3.1

Note

Some buttons have multiple functions. In order to keep the
„
text easier to read, buttons are referred to in an abbreviated
version only.
Example: The
„
referred to as the
3.2

Unpacking

Remove all packaging.
„
Check for the presence of all parts and for transport damage.
„
In case of damage or incomplete delivery, please contact your
dealer (
Please keep the packaging. The appliance can be stored in it if
„
it is not used for a longer period of time.
Place the appliance on a level, stable, clean and dry surface.
„
Ensure that there is sufficient ventilation. Keep a minimum
„
distance of 5 cm between the product and other objects or
walls.
3.3

Power supply

Connect the power cord (16) to a suitable wall outlet. Make
„
sure that the power supply voltage and frequency (230 V~
50 Hz) is the same as needed for the appliance.
The display automatically lights up.
This unit is equipped with a battery back up system
„
(

Backup battery).

Note: Even if the radio is not turned on, a small amount of
„
power is used to display the time. Unplug the power cord
and remove the backup battery before leaving the appliance
unused for a long period of time.
3.4 backup battery
The values set for clock and alarm are protected against a
„
power failure by the backup battery.
However, the alarm and audio functions (
„
work when the power is supplied only by the backup battery.
Unplug the appliance before installing or replacing the battery.
„
Power (On / Standby) / Alarm off (1) button is
(1) button on the following pages.
Warranty).
27
Operation) will not
EN