1. Manuals
  2. Brands
  3. B&R Industrial Automation GmbH Manuals
  4. Industrial PC
  5. 2200 Series
  6. User manual

B&R Industrial Automation GmbH 2200 Series User Manual

Panel pc 2200 built-in devices
Hide thumbs
Table of Contents

Advertisement

Quick Links

Panel PC 2200
built-in devices
User's manual
Version: 1.05 (December 2018)
Model no.: MAPPC2200-ENG
Translation of the original documentation
All values in this manual are current as of its creation. We reserve the right to change the contents of this manual
without notice. B&R Industrial Automation GmbH is not liable for technical or editorial errors and defects in this
manual. In addition, B&R Industrial Automation GmbH assumes no liability for damages that are directly or indirectly
attributable to the delivery, performance or use of this material. We point out that the software and hardware
designations and brand names of the respective companies used in this document are subject to general trademark,
brand or patent protection.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2200 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for B&R Industrial Automation GmbH 2200 Series

Summary of Contents for B&R Industrial Automation GmbH 2200 Series

  • Page 1 Panel PC 2200 built-in devices User's manual Version: 1.05 (December 2018) Model no.: MAPPC2200-ENG Translation of the original documentation All values in this manual are current as of its creation. We reserve the right to change the contents of this manual without notice.

  • Page 2: Table Of Contents

    Table of contents 1 General information....................7 1.1 Manual history..............................7 1.2 Safety guidelines.............................8 1.2.1 Intended use..............................8 1.2.2 Protection against electrostatic discharge....................8 1.2.2.1 Packaging.............................8 1.2.2.2 Regulations for proper ESD handling....................8 1.2.3 Regulations and measures........................8 1.2.4 Transport and storage..........................9 1.2.5 Installation..............................9 1.2.6 Operation..............................
  • Page 3 Table of contents 2.2.5.6 CFast slot............................47 2.2.5.7 Power button............................48 2.2.5.8 Reset button............................48 2.2.5.9 LED status indicators.........................49 2.2.5.10 Battery compartment........................50 2.2.5.11 IF option slot............................ 51 2.2.5.12 Trusted Platform Module (TPM)...................... 52 2.2.6 Features of AP1000 panels........................53 2.2.6.1 Slide-in labels.............................53 2.2.6.2 Key and LED configuration........................54 2.2.6.3 USB interface.............................
  • Page 4 Table of contents 2.3.5.6 5ACCIF01.FPSC-000........................183 2.3.5.7 5ACCIF01.FPSC-001........................190 2.3.5.8 5ACCIF01.FSS0-000........................197 2.3.5.9 5ACCIF01.ICAN-000........................202 2.3.5.10 5ACCIF03.CETH-000........................205 2.3.6 Battery compartment..........................207 2.3.6.1 5ACCBT01.0000-001........................207 3 Commissioning......................208 3.1 Installation..............................208 3.1.1 Important information for installation/commissioning................208 3.1.2 Installing a Panel PC with an AP9x3 panel..................210 3.1.3 Installing the Automation Panel 1000 with retaining clips..............212 3.1.4 Installing the Automation Panel 1000 with clamping blocks..............
  • Page 5 Table of contents 4.2.1 UEFI BIOS upgrade..........................254 4.2.1.1 UEFI BIOS - What do I need to know?...................254 4.2.1.2 Procedure in the EFI shell....................... 255 4.2.2 Firmware upgrade - Panel PC 2200..................... 255 4.2.2.1 Procedure in Windows (B&R Control Center)................. 255 4.2.2.2 Procedure in the EFI shell.......................
  • Page 6 Table of contents 6.3.1.1 General information..........................276 6.3.1.2 Order data............................276 6.3.1.3 Technical data..........................276 6.4 USB flash drives............................277 6.4.1 5MMUSB.xxxx-01..........................277 6.4.1.1 General information..........................277 6.4.1.2 Order data............................277 6.4.1.3 Technical data..........................277 6.4.1.4 Temperature/Humidity diagram......................279 6.4.2 5MMUSB.032G-02..........................280 6.4.2.1 General information..........................280 6.4.2.2 Order data............................280 6.4.2.3 Technical data..........................280 6.4.2.4 Temperature/Humidity diagram......................281 6.5 Replacement parts............................

  • Page 7: General Information

    General information 1 General information Information: This document is not intended for end customers! The safety guidelines required for end customers must be incorporated into the operating instructions for end customers in the respective national lan- guage by the machine manufacturer or system provider. 1.1 Manual history Version Date...

  • Page 8: Safety Guidelines

    General information 1.2 Safety guidelines 1.2.1 Intended use Programmable logic controllers, operating and monitoring devices (such as industrial PCs, Power Panels, Mobile Panels, etc.) as well as the uninterruptible power supply from B&R have been designed, developed and manufac- tured for normal use in industry. They have not been designed, developed and manufactured for use that involves fatal risks or hazards that could result in death, injury, serious physical harm or other loss without the assurance of exceptionally stringent safety precautions.

  • Page 9: Transport And Storage

    General information When using programmable logic controllers as well as when using operating and monitoring devices as control systems in conjunction with a Soft PLC (e.g. B&R Automation Runtime or similar product) or Slot PLC (e.g. B&R LS251 or similar product), the safety measures that apply to industrial controllers (protection by protective equip- ment such as emergency stops, etc.) must be observed in accordance with applicable national and international regulations.

  • Page 10: Programs, Viruses And Malicious Programs

    General information 1.2.6.3 Programs, viruses and malicious programs Any data exchange or installation of software using data storage media (e.g. floppy disk, CD-ROM, USB flash drive, etc.) or via networks or the Internet poses a potential threat to the system. It is the user's own responsibility to avert these dangers and to take appropriate measures such as virus protection programs, firewalls, etc.

  • Page 11: Organization Of Notices

    General information 1.3 Organization of notices Safety notices Contain only information that warns of dangerous functions or situations. Signal word Description Danger! Failure to observe these safety guidelines and notices will result in death, severe injury or substantial damage to property. Warning! Failure to observe these safety guidelines and notices can result in death, severe injury or substantial damage to property.

  • Page 12: Overview

    General information 1.5 Overview Model number Short description Page Accessories 5ACCBT01.0000-001 Battery compartment - Dark gray - Includes battery - For APC2200/PPC2200 5SWUTI.0001-000 HMI Service Center USB flash drive - Hardware diagnostic software - For APC810/PPC800 - For APC910/ PPC900 - For APC2100/PPC2100 - For APC2200/PPC2200 - For APC3100/PPC3100 - For APC51x/PP500 - For Automation Panel 800/900 - For Automation Panel 1000/5000 B&R Linux 9 5SWLIN.0745-MUL...
  • Page 13 General information Model number Short description Page 5AP1180.1505-000 Automation Panel 15.0" XGA TFT - 1024 x 768 pixels (4:3) - Single-touch (analog resistive) - Control cabinet installation - Landscape format - Front USB - For PPC900/PPC2100/PPC3100/PPC2200 - For link modules - Compatible with 5PP580.1505-00, 5AP980.1505-01 5AP1181.1043-000 Automation Panel 10.4"...

  • Page 14: Technical Data

    Technical data 2 Technical data 2.1 Introduction 2.1.1 Information about this user's manual This user's manual contains all the necessary information for a functioning Panel PC 2200 built-in device. 2.1.2 Description of individual modules 2.1.2.1 AP9x3 panels AP9x3 panels form the basis for the Automation Panel 9x3, Panel PC 900, Panel PC 2100, Panel PC 2200 and Panel PC 3100 system families.

  • Page 15: System Units

    Technical data 2.1.2.3 System units System units consist of the CPU board and an aluminum housing. All interfaces and the main memory of the PPC2200 are integrated on the system units. An interface option and CFast card can also be connected. The main memory modules are permanently installed on the system unit and cannot be replaced.

  • Page 16: Design/Configuration

    Technical data 2.1.3 Design/Configuration It is possible to configure the Automation Panel 9x3, Automation Panel 1000 and Panel PC 2200 system individually according to the operating conditions and requirements. The Automation Panel 9x3, Automation Panel 1000 or Panel PC 2200 system is so flexible that an Automation Panel can be converted to a Panel PC or a Panel PC to an Automation Panel.
  • Page 17 Technical data Accessories and software - Configuration Interfaces Interface options Optional, select 1 5ACCIF01.FPCC-000 5ACCIF01.FPLK-000 5ACCIF01.FPLS-000 5ACCIF01.FPLS-001 5ACCIF01.FPSC-000 5ACCIF01.FPSC-001 5ACCIF01.FPCS-000 5ACCIF03.CETH-000 5ACCIF01.ICAN-000 Accessories Optional selection 5MMUSB.2048-01 5MMUSB.4096-01 5MMUSB.032G-02 Terminal blocks Select 1 Power supply connectors 0TB103.9 0TB103.91 Terminal block for IF option 0TB1210.3100 Operating systems Select 1...

  • Page 18: Complete System

    Technical data 2.2 Complete system 2.2.1 Mechanical properties 2.2.1.1 Dimensions AP9x3 panels - Dimensions Figure 1: Panel PC 2200 with AP9x3 panels - Dimensions All dimensions in mm. Display type Model number 12.1" single-touch 5AP923.1215-00 13.5 13.5 15.0" single-touch 5AP923.1505-00 84.5 14.5 13.5...
  • Page 19 Technical data AP1000 panels with retaining clips - Dimensions Figure 2: Panel PC 2200 with AP1000 panels with retaining clips - Dimensions All dimensions in mm. Display type Model number 5.7" single-touch 5AP1120.0573-000 19.5 5.7" keys 5AP1151.0573-000 19.5 7.0" single-touch 5AP1120.0702-000 19.5 7.0"...
  • Page 20 Technical data AP1000 panels with clamping blocks - Dimensions Figure 3: Panel PC 2200 with AP1000 panels with clamping blocks - Dimensions All dimensions in mm. Display type Model number 10.4" single-touch with keys 5AP1181.1043-000 70.5 21.3 17.5 10.4" single-touch with keys 5AP1182.1043-000 355.5 70.5...

  • Page 21: Installation Diagrams

    Technical data 2.2.1.2 Installation diagrams Information: When installing the Panel PC 2200, spacing for air circulation and additional free space for operating and servicing the device must be taken into account. AP9x3 panels - Installation diagrams Figure 4: Panel PC 2200 with AP9x3 panels - Installation diagram All dimensions in mm.
  • Page 22 Technical data AP1000 panels with retaining clips - Installation diagrams Figure 5: Panel PC 2200 with AP1000 panels with retaining clips - Installation diagram All dimensions in mm. The cutout tolerances are +0 mm / -0.5 mm. Display type Model number Z min.
  • Page 23 Technical data AP1000 panels with clamping blocks - Installation diagrams Figure 6: Panel PC 2200 with AP1000 panels with clamping blocks - Installation diagram All dimensions in mm. The cutout tolerances are +0 mm / -0.5 mm. Display type Model number Z min.

  • Page 24: Spacing For Air Circulation

    Technical data 2.2.1.3 Spacing for air circulation To ensure sufficient air circulation, a specified clearance must be provided above, below, to the side and rear of the unit. For the minimum specified clearance, see the following diagrams. This is valid for all variants. Information: The following figure and table exclusively show the thermal view of the complete system.

  • Page 25: Mounting Orientations

    Technical data 2.2.1.4 Mounting orientations The following diagrams show the specified mounting orientations of Panel PC 2200 devices. A PPC2200 is only permitted to be installed as shown or described below. 0° 0° Figure 8: Panel PC 2200 - Mounting orientation Mounting orientation Ambient temperature limitation 0°...

  • Page 26: Weight Specifications

    Technical data 2.2.1.5 Weight specifications Display type Model number Weight [g] 12.1" single-touch 5AP923.1215-00 2200 15.0" single-touch 5AP923.1505-00 3700 19.0" single-touch 5AP923.1906-00 5800 15.6" multi-touch 5AP933.156B-00 3850 18.5" multi-touch 5AP933.185B-00 4850 21.5" multi-touch 5AP933.215C-00 5400 24.0" multi-touch 5AP933.240C-00 7800 Table 17: AP9x3 panels - Weight Display type Model number Weight [g]...

  • Page 27: Environmental Properties

    Technical data 2.2.2 Environmental properties 2.2.2.1 Temperature specifications Because it is possible to combine different system units with different panels, the following tables provide a com- ponent-dependent overview of the maximum, minimum and typical possible ambient temperatures resulting from these combinations. Information: The minimum and maximum specified ambient temperatures were determined under worst-case con- ditions for operation.
  • Page 28 Technical data 5ACCIF01.FPLS-000 5ACCIF01.FPLS-001 5ACCIF01.FPSC-000 5ACCIF01.FPSC-001 ✓ ✓ ✓ ✓ 5ACCIF01.FSS0-000 ✓ ✓ 5ACCIF03.CETH-000 Table 20: Maximum ambient temperature for worst-case operation 2.2.2.1.2 Minimum ambient temperature for worst-case operation Minimum worst-case ambient temperature (system unit 5PPC2200.ALxx-000) All temperature specifications in degrees Celsius (°C) at 500 m above sea level, non-condensing 5PPC2200.AL02-000 5PPC2200.AL04-000...
  • Page 29 Technical data 2.2.2.1.3 Maximum ambient temperature for typical operation Information about typical conditions • The total power of all USB interfaces on the system unit is limited to 1 W. • 2x Gigabit Ethernet. • No permanent 100% processor utilization and graphics utilization. •...
  • Page 30 Technical data 2.2.2.1.4 How are the maximum, minimum and typical ambient temperatures determined? 1. Select the system unit. 2. The columns specify the maximum or minimum temperature in worst-case operation or the maximum tem- perature in typical operation of the complete system depending on the respective system unit. Information: The maximum and typical temperature specifications correspond to a specification at 500 meters above sea level.
  • Page 31 Technical data 2.2.2.1.5 Ambient temperature during storage and transport The following table provides an overview of the minimum and maximum ambient temperatures for storing and transporting the individual component. Display type Model number Storage Transport 12.1" single-touch 5AP923.1215-00 -25 to 80°C -25 to 80°C 15.0"...
  • Page 32 Technical data 2.2.2.1.6 Temperature monitoring Sensors monitor temperature values at various areas in the xPC2200. For the position of temperature sensors, see section "Temperature sensor positions" on page 33. The values specified there represent the defined maximum temperature at this measuring point. If the temperature is exceeded, no alarm is triggered. Temperatures can be read out in different ways in approved operating systems: •...
  • Page 33 Technical data 2.2.2.1.7 Temperature sensor positions Figure 9: Panel PC 2200 - Temperature sensor positions ADI sensors Position Measuring Measurement Max. specified point for Panel Display Temperature of the display (sensor integrated on the panel). 5AP923.1215-00: 90°C 5AP923.1505-00: 90°C 5AP923.1906-00 ≤ D0: 75°C 5AP923.1906-00 ≥...

  • Page 34: Relative Humidity

    Technical data 2.2.2.2 Relative humidity The following table shows the minimum and maximum relative humidity (non-condensing) of the individual com- ponents that are relevant for limiting the humidity of the complete system. Always use the lowest and the highest common value for the determination. Display type Model number Operation...

  • Page 35: Vibration

    Technical data 2.2.2.3 Vibration The following table provides an overview of the maximum vibration values of the complete system. Limitations are possible due to individual components. Panel PC Operation Storage Transport 1)2) 1)2) Continuous Periodic With CFast card 2 to 9 Hz: 2 to 9 Hz: 2 to 8 Hz: 7.5 mm amplitude 2 to 8 Hz: 7.5 mm amplitude...

  • Page 36: Electrical Properties

    Technical data 2.2.3 Electrical properties 2.2.3.1 +24 VDC power supply Danger! The device is only permitted to be supplied with a SELV/PELV power supply or with safety extra-low voltage (SELV) per EN 60950. The 3-pin connector required for connecting the power supply is not included in delivery. This can be ordered from B&R using model number 0TB103.9 (screw clamp terminal block) or 0TB103.91 (cage clamp terminal block).

  • Page 37: Power Calculation

    Technical data 2.2.3.2 Power calculation In order to calculate the total power of the Panel PC 2200, the power rating of the display used (see AP9x3 panels - Power calculation AP1000 panels - Power calculation) must be added to the power rating of the system unit; if an interface option or optional CFast card is connected, these power ratings must be added as well.
  • Page 38 Technical data The following specifications are maximum values. Interface option Model number +5 V +12 V Total power consumption 5ACCIF01.ICAN-000 0.45 W 0.05 W 0.5 W POWERLINK CAN X2X 5ACCIF01.FPCC-000 0.45 W 1.55 W POWERLINK RS485 CAN 5ACCIF01.FPCS-000 0.75 W 1.75 W POWERLINK 5ACCIF01.FPLK-000...

  • Page 39: Block Diagrams

    Technical data 2.2.3.3 Block diagrams 2.2.3.3.1 System units - Block diagram SDRAM DDR4 Channel 1 LPDDR4 Intel Apollo Lake SDRAM DDR4 Channel 2 LPDDR4 (optional) BIOS Intel Atom 2 or 4 cores, 14 nm TPM2.0 (optional) USB interface 7 USB 2.0 Host USB 3.0 Gen9...
  • Page 40 Technical data IF option 2x POWERLINK/nvSRAM PCIe 2 FPGA POWERLINK Power down POWERLINK nvSRAM LED L1 LED L2 LED L3 Green Green Green/Red Figure 13: 2x POWERLINK / nvSRAM IF option (5ACCIF01.FPLK-000) - Block diagram IF option POWERLINK/RS232/FRAM PCIe 2 FPGA POWERLINK Power down...
  • Page 41 Technical data IF option CAN 82527 PCIe 2 Intel 82527 Power down Connector, Insulator 10-pin Terminating LED L1 Yellow resistor Figure 18: CAN IF option (5ACCIF01.ICAN-000) - Block diagram IF option 2x RS422/RS485 PCIe 2 RS422/RS485 Power down Connector, Insulator 10-pin Insulator RS422/RS485...

  • Page 42: Product Information

    Technical data 2.2.4 Product information Each B&R device is assigned a device number with a unique serial number and barcode (type 128) to enable unique identification of the device. The product information includes additional data such as product family, power data, certifications, safety notices, license adhesive labels and a field for customer information.

  • Page 43: Device Interfaces And Slots

    Technical data 2.2.5 Device interfaces and slots 2.2.5.1 Device interfaces - Overview The interfaces are located on the bottom of the Panel PC 2200. (16) (15) (1 ) 4 (1 ) 0 (1 ) 2 (1 ) 3 Figure 22: Device interfaces - Overview No.

  • Page 44: Vdc Power Supply

    Technical data 2.2.5.2 +24 VDC power supply Danger! The device is only permitted to be supplied with a SELV/PELV power supply or with safety extra-low voltage (SELV) per EN 60950. The 3-pin connector required for connecting the power supply is not included in delivery. This can be ordered from B&R using model number 0TB103.9 (screw clamp terminal block) or 0TB103.91 (cage clamp terminal block).

  • Page 45: Ethernet 1 Interface (Eth1)

    Technical data 2.2.5.3 Ethernet 1 interface (ETH1) This Ethernet controller is integrated in the system unit and routed externally. Ethernet 1 interface (ETH1 Controller Intel I210 RJ45 connector, female Wiring S/STP (Cat 5e) Transfer rate 10/100/1000 Mbit/s Cable length Max. 100 m (min. Cat 5e) LED "Speed"...

  • Page 46: Usb Interfaces

    Technical data 2.2.5.5 USB interfaces Panel PC devices are equipped with a USB 3.0 (Universal Serial Bus) host controller with several USB ports, of which two USB 3.0 interfaces are routed externally and freely available to the user. Warning! USB peripheral devices can be connected to the USB interfaces. Due to the variety of USB devices available on the market, B&R cannot guarantee their functionality.

  • Page 47: Cfast Slot

    Technical data 2.2.5.6 CFast slot The Panel PC offers an easily accessible CFast slot so that the CFast card can also be used as a removable storage medium for data transfer or upgrades. This CFast slot is internally connected to the chipset via SATA 0 and implemented in version SATA III (SATA 6.0 Gbit/s).

  • Page 48: Power Button

    Technical data 2.2.5.7 Power button Due to full ATX power supply support, the power button has a wide range of functionalities. Power button The power button can be pressed without any tools. Power button The power button behaves like the power switch on current desktop PCs with an ATX power supply: Short press ...

  • Page 49: Led Status Indicators

    Technical data 2.2.5.9 LED status indicators The LED status indicators are located between the power button and Ethernet 2 interface. LED "Power" LED "Disk" (CFast) LED "Link" LED "RUN" The following intervals are used for the LED status indicators: Width of box: 250 ms Repeat interval: 500 ms.

  • Page 50: Battery Compartment

    Technical data 2.2.5.10 Battery compartment The battery compartment consists of the battery holder and the battery. The lithium battery (3 V, 1000 mAh) ensures backup power to the internal real-time clock (RTC). It is located on the underside of the device behind the gray cover. The self-discharge time of the battery is at least 8 years (at 50°C, 6 μA for the components being supplied).

  • Page 51: If Option Slot

    Technical data 2.2.5.11 IF option slot Panel PC system units have 1 slot for an interface option. The following table lists the interface options that can be operated in the IF option slot. IF option IF1, IFx slot Model number Short description Interface option 5ACCIF01.FPCC-000...

  • Page 52: Trusted Platform Module (Tpm)

    Technical data 2.2.5.12 Trusted Platform Module (TPM) Depending on the configuration ordered, the system unit may contain a Trusted Platform Module (TPM 2.0). A TPM is a chip that adds important security features to your device, such as improved protection of the PC against unau- thorized tampering by third parties.

  • Page 53: Features Of Ap1000 Panels

    Technical data 2.2.6 Features of AP1000 panels Different display diagonals as well as panels with touch screen and keys are available. The following table provides an overview of the panels and their features. Display type Model number Resolution Touch screen Function keys System keys Front USB interface...

  • Page 54: Key And Led Configuration

    Technical data 2.2.6.2 Key and LED configuration Each key and LED can be individually configured and adapted to the application. Various B&R tools are available for this purpose: • B&R Key Editor for Windows operating systems • B&R KCF Editor for Windows operating systems •...
  • Page 55 Technical data 5AP1180.1043-000 Figure 27: 5AP1180.1043-000 - Key and LED configuration 5AP1181.1043-000 Figure 28: 5AP1181.1043-000 - Key and LED configuration Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...
  • Page 56 Technical data 5AP1182.1043-000 Figure 29: 5AP1182.1043-000 - Key and LED configuration 5AP1180.1505-000 Figure 30: 5AP1180.1505-000 - Key and LED configuration Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...
  • Page 57 Technical data 5AP1181.1505-000 Figure 31: 5AP1181.1505-000 - Key and LED configuration Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 58: Usb Interface

    Technical data 2.2.6.3 USB interface AP1000 panels with 10.4", 12.1" (4:3 format only), 15" (4:3 format only) and 19" display diagonals are equipped with a front USB 2.0 interface. This is equipped with a USB interface cover. IP65 protection (front) is only provided if the USB interface cover is correctly installed.

  • Page 59: Installation Compatibility

    Technical data 2.2.7 Installation compatibility This section describes the compatibility of the installation dimensions for Power Panel 100/200, Power Panel 300/400, Power Panel 500, Automation Panel 900, Automation Panel 1000, Panel PC 700 and Panel PC 800 devices depending on the respective device diagonals. The external dimensions of the device types of the respective diagonals are identical.

  • Page 60: Compatibility Details

    Technical data Diagonal Format PP100/200 PP300/400 PP500 AP900 AP1000 PPC700 PPC800 Installation 415 x 312 415 x 313 415 x 312 415 x 313 415 x 312 dimensions Outer dimen- 435 x 430 435 x 430 sions Por- trait1 Installation 415 x 412 415 x 413 415 x 412...
  • Page 61 Technical data 212 x 156 PP100/200/300/400 AP1000 199 x 143 PP500 Outer contour of device Cutout for device Figure 33: Installation compatibility - 5.7" devices - Landscape1 The 5.7" Automation Panel 1000, Power Panel 500, Power Panel 300/400 and Power Panel 100/200 devices in Landscape1 format are 100% compatible.
  • Page 62 Technical data 212 x 245 PP100/200/300/400 AP1000 199 x 226.8 199 x 232 PP500 11.7 PP100/200/300/400 6.5 PP500, AP1000 Outer contour of device Cutout for PP100/200/300/400 device Cutout for PP500/AP1000 device Figure 35: Installation compatibility - 5.7" devices - Portrait1 The 5.7"...
  • Page 63 Technical data 2.2.7.2.3 10.4" devices The cutout tolerance for the PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 is ±0.5 mm. The cutout tolerance for the AP1000 is +0 mm / -0.5 mm. 323 x 260 AP900/PPC700 AP1000 PP100/200/300/400 PP500 303 x 243 PP100/200/300/400 PP500 AP900...
  • Page 64 Technical data 323 x 358 PP100/200/300/400 AP900/PPC700 303 x 336 303 x 341 PP500 AP1000 13.5 PP100/200/300/400 8.5 AP900, AP1000, PPC700, PP500 Outer contour of device Cutout for PP100/200/300/400 device Cutout for AP900/AP1000/PPC700/PP500 device Figure 38: Installation compatibility - 10.4" devices - Portrait1 10.4"...
  • Page 65 Technical data 2.2.7.2.4 12.1" devices The cutout tolerance for the PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 is ±0.5 mm. The cutout tolerance for the AP1000 is +0 mm / -0.5 mm. 10 AP900, PPC700, PP500, AP1000 10 AP900, PPC700, PP500, AP1000 8.5 PP100/200/300/400 8.5 PP100/200/300/400 362 x 284...
  • Page 66 Technical data 2.2.7.2.5 15" devices The cutout tolerance for the PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 is ±0.5 mm. The cutout tolerance for the AP1000 is +0 mm / -0.5 mm. 435 x 330 8.5 PP500, AP1000 PP100/200/300/400, AP900, PPC700, PPC800 AP900/PPC700 AP1000 PPC800...
  • Page 67 Technical data 2.2.7.2.6 17" devices The cutout tolerance for the PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 is ±0.5 mm. The cutout tolerance for the AP1000 is +0 mm / -0.5 mm. 477 x 390 460 x 373 AP900/PPC700 Outer contour of device Cutout for device Figure 42: Installation compatibility - 17"...
  • Page 68 Technical data 2.2.7.2.8 21.3" devices The cutout tolerance for the PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 is ±0.5 mm. The cutout tolerance for the AP1000 is +0 mm / -0.5 mm. 583 x 464 566 x 447 AP900 Outer contour of device Cutout for device Figure 44: Installation compatibility - 21.3"...

  • Page 69: Individual Components

    Technical data 2.3 Individual components 2.3.1 AP9x3 panels 2.3.1.1 5AP923.1215-00 2.3.1.1.1 General information • Panel for AP9x3, PPC900, PPC2100, PPC2200 or PPC3100 • 12.1" TFT XGA color display • Single-touch (analog resistive) • Control cabinet installation 2.3.1.1.2 Order data Model number Short description Figure Panels...
  • Page 70 Technical data Model number 5AP923.1215-00 Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Protection per UL 50 Front: Type 4X indoor use only Mechanical properties Front Frame...

  • Page 71: 5Ap923.1505-00

    Technical data 2.3.1.2 5AP923.1505-00 2.3.1.2.1 General information • Panel for AP9x3, PPC900, PPC2100, PPC2200 or PPC3100 • 15.0" TFT XGA color display • Single-touch (analog resistive) • Control cabinet installation 2.3.1.2.2 Order data Model number Short description Figure Panels 5AP923.1505-00 Automation Panel 15.0"...
  • Page 72 Technical data Model number 5AP923.1505-00 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Protection per UL 50 Front: Type 4X indoor use only Mechanical properties Front Frame Aluminum, coated Keypad overlay Material Polyester...
  • Page 73 Technical data Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 74: 5Ap923.1906-00

    Technical data 2.3.1.3 5AP923.1906-00 2.3.1.3.1 General information • Panel for AP9x3, PPC900, PPC2100, PPC2200 or PPC3100 • 19.0" TFT SXGA color display • Single-touch (analog resistive) • Control cabinet installation 2.3.1.3.2 Order data Model number Short description Figure Panels 5AP923.1906-00 Automation Panel 19.0"...
  • Page 75 Technical data Model number 5AP923.1906-00 Revision Mechanical properties Front Frame Aluminum, coated Keypad overlay Material Polyester Light background RAL 9006 Dark gray border around display RAL 7024 Gasket 3 mm fixed gasket Dimensions Width 440 mm Height 358 mm Weight 5800 g Table 60: 5AP923.1906-00, 5AP923.1906-00 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
  • Page 76 Technical data 2.3.1.3.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 50: 5AP923.1906-00 ≥ Rev. E0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing RH [%] T [°C] -50 -40 -30 -20 -10...

  • Page 77: 5Ap933.156B-00

    Technical data 2.3.1.4 5AP933.156B-00 2.3.1.4.1 General information • Panel for AP9x3, PPC900, PPC2100, PPC2200 or PPC3100 • 15.6" TFT HD color display • Multi-touch (PCT) • Control cabinet installation 2.3.1.4.2 Order data Model number Short description Figure Panels 5AP933.156B-00 Automation Panel 15.6" HD TFT - 1366 x 768 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC900/PPC2100/PPC3100/PPC2200 - For link modules...
  • Page 78 Technical data Model number 5AP933.156B-00 Revision Dimensions Width 414 mm Height 258.5 mm Weight 3850 g Table 62: 5AP933.156B-00, 5AP933.156B-00 - Technical data At 25°C ambient temperature. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%. The specifications for the touch screen driver must be taken into account.
  • Page 79 Technical data RH [%] T [°C] -50 -40 -30 -20 -10 Figure 54: 5AP933.156B-00 ≤ Rev. C0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 80: 5Ap933.185B-00

    Technical data 2.3.1.5 5AP933.185B-00 2.3.1.5.1 General information • Panel for AP9x3, PPC900, PPC2100, PPC2200 or PPC3100 • 18.5" TFT HD color display • Multi-touch (PCT) • Control cabinet installation 2.3.1.5.2 Order data Model number Short description Figure Panels 5AP933.185B-00 Automation Panel 18.5" HD TFT - 1366 x 768 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC900/PPC2100/PPC3100/PPC2200 - For link modules...
  • Page 81 Technical data Model number 5AP933.185B-00 Revision Dimensions Width 475 mm Height 295 mm Weight 4850 g Table 64: 5AP933.185B-00, 5AP933.185B-00 - Technical data At 25°C ambient temperature. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%. The specifications for the touch screen driver must be taken into account.
  • Page 82 Technical data RH [%] T [°C] -50 -40 -30 -20 -10 Figure 57: 5AP933.185B-00 ≤ Rev. C0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 83: 5Ap933.215C-00

    Technical data 2.3.1.6 5AP933.215C-00 2.3.1.6.1 General information • Panel for AP9x3, PPC900, PPC2100, PPC2200 or PPC3100 • 21.5" TFT FHD color display • Multi-touch (PCT) • Control cabinet installation 2.3.1.6.2 Order data Model number Short description Figure Panels 5AP933.215C-00 Automation Panel 21.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC900/PPC2100/PPC3100/PPC2200 - For link modules...
  • Page 84 Technical data Model number 5AP933.215C-00 Revision Dimensions Width 541.5 mm Height 333 mm Weight 5400 g Table 66: 5AP933.215C-00, 5AP933.215C-00 - Technical data At 25°C ambient temperature. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%. The specifications for the touch screen driver must be taken into account.
  • Page 85 Technical data RH [%] T [°C] -50 -40 -30 -20 -10 Figure 60: 5AP933.215C-00 ≤ Rev. C0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 86: 5Ap933.240C-00

    Technical data 2.3.1.7 5AP933.240C-00 2.3.1.7.1 General information • Panel for AP9x3, PPC900, PPC2100, PPC2200 or PPC3100 • 24" TFT FHD color display • Multi-touch (PCT) • Control cabinet installation 2.3.1.7.2 Order data Model number Short description Figure Panels 5AP933.240C-00 Automation Panel 24.0" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC900/PPC2100/PPC3100/PPC2200 - For link modules...
  • Page 87 Technical data Model number 5AP933.240C-00 Revision Mechanical properties Front Frame Aluminum, coated Design Black Gasket 3 mm fixed gasket Dimensions Width 598.5 mm Height 364 mm Weight Approx. 7800 g Table 68: 5AP933.240C-00, 5AP933.240C-00 - Technical data Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the product family.
  • Page 88 Technical data Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing RH [%] T [°C] -50 -40 -30 -20 -10 Figure 63: 5AP933.240C-00 ≤ Rev. C0 - Temperature/Humidity diagram Diagram legend Operation T [°C]...

  • Page 89: Ap1000 Panels

    Technical data 2.3.2 AP1000 panels 2.3.2.1 5AP1120.0573-000 2.3.2.1.1 General information • Panel for AP1000, PPC2100 or PPC2200 • 5.7" TFT VGA color display • Single-touch (analog resistive) • Control cabinet installation 2.3.2.1.2 Order data Model number Short description Figure Panels 5AP1120.0573-000 Automation Panel 5.7"...
  • Page 90 Technical data Model number 5AP1120.0573-000 Revision Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Protection per UL 50 Front: Type 4X indoor use only Mechanical properties Front Frame Aluminum, naturally anodized Keypad overlay Material Polyester...
  • Page 91 Technical data RH [%] T [°C] -50 -40 -30 -20 -10 Figure 66: 5AP1120.0573-000 ≤ Rev. D0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 92: 5Ap1151.0573-000

    Technical data 2.3.2.2 5AP1151.0573-000 2.3.2.2.1 General information • Panel for AP1000, PPC2100 or PPC2200 • 5.7" TFT VGA color display • 22 function keys and 20 system keys • Control cabinet installation 2.3.2.2.2 Order data Model number Short description Figure Panels 5AP1151.0573-000 Automation Panel 5.7"...
  • Page 93 Technical data Product ID 5AP1151.0573-000 Revision Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Degree of protection per UL 50 Front: Type 4X indoor use only Mechanical properties Front...
  • Page 94 Technical data RH [%] T [°C] -50 -40 -30 -20 -10 Figure 69: 5AP1151.0573-000 ≤ Rev. D0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 95: 5Ap1120.0702-000

    Technical data 2.3.2.3 5AP1120.0702-000 2.3.2.3.1 General information • Panel for AP1000, PPC2100 or PPC2200 • 7.0" TFT WVGA color display • Single-touch (analog resistive) • Control cabinet installation 2.3.2.3.2 Order data Model number Short description Figure Panels 5AP1120.0702-000 Automation Panel 7" WVGA TFT - 800 x 480 pixels (16:10) - Sin- gle-touch (analog resistive) - Control cabinet installation - Land- scape format - For PPC2100 / PPC2200 / link modules - Com- patible with 5PP520.0702-00...
  • Page 96 Technical data Model number 5AP1120.0702-000 Mechanical properties Front Frame Aluminum, naturally anodized Keypad overlay Material Polyester Light background RAL 9006 Dark gray border around display RAL 7024 Gasket 3 mm fixed gasket Dimensions Width 212 mm Height 156 mm Weight Approx.

  • Page 97: 5Ap1130.0702-000

    Technical data 2.3.2.4 5AP1130.0702-000 2.3.2.4.1 General information • Panel for AP1000, PPC2100 or PPC2200 • 7.0" TFT WVGA color display • Multi-touch (projected capacitive) • Control cabinet installation 2.3.2.4.2 Order data Model number Short description Figure Panels 5AP1130.0702-000 Automation Panel 7.0" WVGA TFT - 800 x 480 pixels (16:10) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC2100 / PPC2200 / link modules - Compatible with 5PP520.0702-00...
  • Page 98 Technical data Model number 5AP1130.0702-000 Mechanical properties Front Frame Aluminum, coated Design Black Gasket 3 mm fixed gasket Dimensions Width 209 mm Height 153 mm Weight 1200 g Table 76: 5AP1130.0702-000 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark. At 25°C ambient temperature.

  • Page 99: 5Ap1120.101E-000

    Technical data 2.3.2.5 5AP1120.101E-000 2.3.2.5.1 General information • Panel for AP1000, PPC2100, PPC2200 or PPC3100 • 10.1" TFT WXGA color display • Single-touch (analog resistive) • Control cabinet installation 2.3.2.5.2 Order data Model number Short description Figure Panels 5AP1120.101E-000 Automation Panel 10.1" WXGA TFT - 1280 x 800 pixels (16:10) - Single-touch (analog resistive) - Control cabinet installation - Landscape format - For PPC2100 / PPC3100 / PPC2200 / link modules...
  • Page 100 Technical data Model number 5AP1120.101E-000 Mechanical properties Front Frame Aluminum, coated Keypad overlay Material Polyester Light background RAL 9006 Dark gray border around display RAL 7024 Gasket 3 mm fixed gasket Dimensions Width 279 mm Height 191 mm Weight 1900 g Table 78: 5AP1120.101E-000 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.

  • Page 101: 5Ap1130.101E-000

    Technical data 2.3.2.6 5AP1130.101E-000 2.3.2.6.1 General information • Panel for AP1000, PPC2100, PPC2200 or PPC3100 • 10.1" TFT WXGA color display • Multi-touch (projected capacitive) • Control cabinet installation 2.3.2.6.2 Order data Model number Short description Figure Panels 5AP1130.101E-000 Automation Panel 10.1" WXGA TFT - 1280 x 800 pixels (16:10) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC2100 / PPC3100 / PPC2200 / link modules...
  • Page 102 Technical data Model number 5AP1130.101E-000 Mechanical properties Front Frame Aluminum, coated Design Black Gasket 3 mm fixed gasket Dimensions Width 279 mm Height 191 mm Weight 2000 g Table 80: 5AP1130.101E-000 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark. At 25°C ambient temperature.

  • Page 103: 5Ap1120.1043-000

    Technical data 2.3.2.7 5AP1120.1043-000 2.3.2.7.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 10.4" TFT VGA color display • Single-touch (analog resistive) • Front USB interface • Control cabinet installation 2.3.2.7.2 Order data Model number Short description Figure Panels 5AP1120.1043-000...
  • Page 104 Technical data Model number 5AP1120.1043-000 Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ± 3% Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Protection per UL 50 Front: Type 4X indoor use only Mechanical properties...
  • Page 105 Technical data 2.3.2.7.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 79: 5AP1120.1043-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 106: 5Ap1180.1043-000

    Technical data 2.3.2.8 5AP1180.1043-000 2.3.2.8.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 10.4" TFT VGA color display • Single-touch (analog resistive) • 22 function keys • Front USB interface • Control cabinet installation 2.3.2.8.2 Order data Model number Short description Figure...
  • Page 107 Technical data Model number 5AP1180.1043-000 Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ± 3% Keys Function keys 22 with LED (yellow) System keys Service life >1,000,000 actuations at 1 ± 0.3 N to 3 ± 0.3 N actuating force LED brightness Yellow Typ.
  • Page 108 Technical data 2.3.2.8.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 81: 5AP1180.1043-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 109: 5Ap1181.1043-000

    Technical data 2.3.2.9 5AP1181.1043-000 2.3.2.9.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 10.4" TFT VGA color display • Single-touch (analog resistive) • 38 function keys and 20 system keys • Front USB interface • Control cabinet installation 2.3.2.9.2 Order data Model number Short description...
  • Page 110 Technical data Model number 5AP1181.1043-000 Backlight Type Brightness (dimmable) Typ. 22.5 to 450 cd/m² Half-brightness time 70,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ± 3% Keys Function keys 38 with LED (yellow) System keys Numeric keys, cursor block Service life >1,000,000 actuations at 1 ±...
  • Page 111 Technical data 2.3.2.9.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 83: 5AP1181.1043-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 112: 5Ap1182.1043-000

    Technical data 2.3.2.10 5AP1182.1043-000 2.3.2.10.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 10.4" TFT VGA color display • Single-touch (analog resistive) • 44 function keys and 20 system keys • Front USB interface • Control cabinet installation 2.3.2.10.2 Order data Model number Short description...
  • Page 113 Technical data Model number 5AP1182.1043-000 Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ± 3% Keys Function keys 44 with LED (yellow) System keys Numeric keys, cursor block Service life >1,000,000 actuations at 1 ± 0.3 N to 3 ± 0.3 N actuating force LED brightness Yellow Typ.
  • Page 114 Technical data 2.3.2.10.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 85: 5AP1182.1043-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 115: 5Ap1120.1214-000

    Technical data 2.3.2.11 5AP1120.1214-000 2.3.2.11.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 12.1" TFT SVGA color display • Single-touch (analog resistive) • Front USB interface • Control cabinet installation 2.3.2.11.2 Order data Model number Short description Figure Panels 5AP1120.1214-000...
  • Page 116 Technical data Model number 5AP1120.1214-000 Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ± 3% Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Protection per UL 50 Front: Type 4X indoor use only Mechanical properties...
  • Page 117 Technical data 2.3.2.11.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 87: 5AP1120.1214-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 118: 5Ap1120.121E-000

    Technical data 2.3.2.12 5AP1120.121E-000 2.3.2.12.1 General information • Panel for AP1000, PPC2100, PPC2200 or PPC3100 • 12.1" TFT WXGA color display • Single-touch (analog resistive) • Control cabinet installation 2.3.2.12.2 Order data Model number Short description Figure Panels 5AP1120.121E-000 Automation Panel 12.1" WXGA TFT - 1280 x 800 pixels (16:10) - Single-touch (analog resistive) - Control cabinet installation - Landscape format - For PPC2100 / PPC3100 / PPC2200 / link modules...
  • Page 119 Technical data Model number 5AP1120.121E-000 Mechanical properties Front Frame Aluminum, coated Keypad overlay Material Polyester Light background RAL 9006 Dark gray border around display RAL 7024 Gasket 3 mm fixed gasket Dimensions Width 324 mm Height 221.5 mm Weight 2300 g Table 92: 5AP1120.121E-000 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.

  • Page 120: 5Ap1130.121E-000

    Technical data 2.3.2.13 5AP1130.121E-000 2.3.2.13.1 General information • Panel for AP1000, PPC2100, PPC2200 or PPC3100 • 12.1" TFT WXGA color display • Multi-touch (projected capacitive) • Control cabinet installation 2.3.2.13.2 Order data Model number Short description Figure Panels 5AP1130.121E-000 Automation Panel 12.1" WXGA TFT - 1280 x 800 pixels (16:10) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC2100 / PPC3100 / PPC2200 / link modules...
  • Page 121 Technical data Model number 5AP1130.121E-000 Mechanical properties Front Frame Aluminum, coated Design Black Gasket 3 mm fixed gasket Dimensions Width 324 mm Height 221.5 mm Weight 2400 g Table 94: 5AP1130.121E-000 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark. At 25°C ambient temperature.

  • Page 122: 5Ap1120.1505-000

    Technical data 2.3.2.14 5AP1120.1505-000 2.3.2.14.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 15.0" TFT XGA color display • Single-touch (analog resistive) • Front USB interface • Control cabinet installation 2.3.2.14.2 Order data Model number Short description Figure Panels 5AP1120.1505-000...
  • Page 123 Technical data Model number 5AP1120.1505-000 Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ± 3% Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Protection per UL 50 Front: Type 4X indoor use only Mechanical properties...
  • Page 124 Technical data 2.3.2.14.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 93: 5AP1120.1505-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 125: 5Ap1180.1505-000

    Technical data 2.3.2.15 5AP1180.1505-000 2.3.2.15.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 15.0" TFT XGA color display • Single-touch (analog resistive) • 32 function keys • Front USB interface • Control cabinet installation 2.3.2.15.2 Order data Model number Short description Figure...
  • Page 126 Technical data Model number 5AP1180.1505-000 Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ± 3% Keys Function keys 32 with LED (yellow) System keys Service life >1,000,000 actuations at 1 ± 0.3 N to 3 ± 0.3 N actuating force LED brightness Yellow Typ.
  • Page 127 Technical data 2.3.2.15.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 95: 5AP1180.1505-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 128: 5Ap1181.1505-000

    Technical data 2.3.2.16 5AP1181.1505-000 2.3.2.16.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 15.0" TFT XGA color display • Single-touch (analog resistive) • 32 function keys • 92 system keys • Front USB interface • Control cabinet installation Information: This Automation Panel is not approved for DVI operation.
  • Page 129 Technical data Model number 5AP1181.1505-000 Contrast 700:1 Viewing angles Horizontal Direction R = 80° / Direction L = 80° Vertical Direction U = 70° / Direction D = 70° Backlight Type Brightness (dimmable) Typ. 20 to 400 cd/m² Half-brightness time 50,000 h Touch screen Type...
  • Page 130 Technical data 2.3.2.16.4 Dimensions Figure 96: 5AP1181.1505-000 - Dimensions 2.3.2.16.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 97: 5AP1181.1505-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 131: 5Ap1120.156B-000

    Technical data 2.3.2.17 5AP1120.156B-000 2.3.2.17.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 15.6" TFT HD color display • Single-touch (analog resistive) • Control cabinet installation 2.3.2.17.2 Order data Model number Short description Figure Panels 5AP1120.156B-000 Automation Panel 15.6"...
  • Page 132 Technical data Model number 5AP1120.156B-000 Mechanical properties Front Frame Aluminum, coated Keypad overlay Material Polyester Light background RAL 9006 Dark gray border around display RAL 7024 Gasket 3 mm fixed gasket Dimensions Width 414 mm Height 258.5 mm Weight 4200 g Table 102: 5AP1120.156B-000 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.

  • Page 133: 5Ap1130.156C-000

    Technical data 2.3.2.18 5AP1130.156C-000 2.3.2.18.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 15.6" FHD color display • Multi-touch (projected capacitive) • Control cabinet installation 2.3.2.18.2 Order data Model number Short description Figure Panels 5AP1130.156C-000 Automation Panel 15.6" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC900/PPC2100/PPC3100/PPC2200 - For link modules...
  • Page 134 Technical data Model number 5AP1130.156C-000 Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Protection per UL 50 Front: Type 4X indoor use only Mechanical properties Front Frame...
  • Page 135 Technical data Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 136: 5Ap1130.185C-000

    Technical data 2.3.2.19 5AP1130.185C-000 2.3.2.19.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 18.5" FHD color display • Multi-touch (projected capacitive) • Control cabinet installation 2.3.2.19.2 Order data Model number Short description Figure Panels 5AP1130.185C-000 Automation Panel 18.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet installation - Landscape format - For PPC900/PPC2100/PPC3100/PPC2200 - For link modules...
  • Page 137 Technical data Model number 5AP1130.185C-000 Mechanical properties Front Frame Aluminum, coated Design Black Gasket 3 mm fixed gasket Dimensions Width 475 mm Height 295 mm Weight 4700 g Table 106: 5AP1130.185C-000 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark. At 25°C ambient temperature.

  • Page 138: 5Ap1120.1906-000

    Technical data 2.3.2.20 5AP1120.1906-000 2.3.2.20.1 General information • Panel for AP1000, PPC900, PPC2100, PPC2200 or PPC3100 • 19.0" TFT SXGA color display • Single-touch (analog resistive) • Front USB interface • Control cabinet installation 2.3.2.20.2 Order data Model number Short description Figure Panels 5AP1120.1906-000...
  • Page 139 Technical data Model number 5AP1120.1906-000 Backlight Type Brightness (dimmable) Typ. 35 to 350 cd/m² Half-brightness time 70,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ± 3% Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit)
  • Page 140 Technical data 2.3.2.20.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 105: 5AP1120.1906-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 141: System Units

    Technical data 2.3.3 System units 2.3.3.1 5PPC2200.ALxx-000 2.3.3.1.1 General information PPC2200 system units consist of a CPU board, housing and mounting plate. It includes all interfaces; in addition, an interface option can be installed. The main memory is permanently soldered to the CPU board and cannot be replaced or upgraded.
  • Page 142 Technical data 2.3.3.1.3 Technical data Information: The following specified characteristic data, features and limit values are only valid for these individual components and may differ from those of the complete system. The data specified for the complete system applies to the complete system in which this individual component is used, for example. Model number 5PPC2200.AL02-000 5PPC2200.AL04-000...
  • Page 143 Technical data Model number 5PPC2200.AL02-000 5PPC2200.AL04-000 5PPC2200.AL14-000 5PPC2200.AL18-000 Ethernet Quantity Design RJ45, shielded Transfer rate 10/100/1000 Mbit/s Max. baud rate 1 Gbit/s Inserts Interface option Electrical characteristics Nominal voltage 24 VDC ±25%, SELV Nominal current Max. 4 A Inrush current Typ.

  • Page 144: Cfast Cards

    Technical data 2.3.4 CFast cards 2.3.4.1 General information CFast cards are easily replaceable storage media. Due to their robustness against and environmental influences (temperature, shock, vibration, etc.), CFast cards offer optimal values for use as storage media in industrial envi- ronments.
  • Page 145 Technical data 2.3.4.2.5 Calculating the expected service life for an existing application To better verify whether an SLC or MLC CFast card should be used for an existing application, the following procedure is recommended: • Read the "Average erase count" of the data storage medium via S.M.A.R.T. •...

  • Page 146: 5Cfast.xxxx-00

    Technical data 2.3.4.3 5CFAST.xxxx-00 2.3.4.3.1 General information These CFast cards are based on single-level cell (SLC) technology and compatible with SATA 2.6. The dimensions are identical to CompactFlash cards. 2.3.4.3.2 Order data Model number Short description Figure CFast cards 5CFAST.2048-00 CFast 2 GB SLC 5CFAST.4096-00 CFast 4 GB SLC...
  • Page 147 Technical data Model number 5CFAST.2048-00 5CFAST.4096-00 5CFAST.8192-00 5CFAST.016G-00 5CFAST.032G-00 Sequential write Typical With 128 kB block size 57 MB/s 86 MB/s 86 MB/s 86 MB/s 111 MB/s With 4 kB block size 36 MB/s 40 MB/s 40 MB/s 40 MB/s 40 MB/s Maximum With 128 kB block size...
  • Page 148 Technical data Model number 5CFAST.2048-00 5CFAST.4096-00 5CFAST.8192-00 5CFAST.016G-00 5CFAST.032G-00 Mechanical properties Dimensions Width 42.8 ± 0.10 mm Length 36.4 ± 0.10 mm Depth 3.6 ± 0.10 mm Weight 10 g Table 112: 5CFAST.2048-00, 5CFAST.4096-00, 5CFAST.8192-00, 5CFAST.016G-00, 5CFAST.032G-00 - Technical data Per JEDEC (JESD47), EOL conditions are not permitted to be reached before 18 months.
  • Page 149 Technical data 2.3.4.3.5 Dimensions 42.8 ±0.1 2.3 ±0.1 +0.2 -0.1 1.15 ±0.1 1 ±0.1 41.6 ±0.13 0.6 ±0.07 1 ±0.07 1 ±0.07 Bottom 1 ±0.1 6.35 33.96 ±0.15 Figure 108: CFast card - Dimensions Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 150: 5Cfast.xxxx-10

    Technical data 2.3.4.4 5CFAST.xxxx-10 2.3.4.4.1 General information These CFast cards are based on multi-level cell (MLC) technology and compatible with SATA 3. The dimensions are identical to CompactFlash cards. 2.3.4.4.2 Order data Model number Short description Figure CFast cards 5CFAST.032G-10 CFast 32 GB MLC 5CFAST.064G-10 CFast 64 GB MLC...
  • Page 151 Technical data Model number 5CFAST.032G-10 5CFAST.064G-10 5CFAST.128G-10 5CFAST.256G-10 Guaranteed data volume Guaranteed 86.4 TBW 172.8 TBW 345.6 TBW 691.2 TBW Client workload 39.06 TBW 71.02 TBW 104.17 TBW 159.57 TBW Erase/Write cycles Guaranteed 3000 Wear leveling Static Error correction coding (ECC) S.M.A.R.T.
  • Page 152 Technical data 2.3.4.4.4 Temperature/Humidity diagram RH [%] (1), (2) T [°C] -50 -40 -30 -20 -10 Figure 109: 5CFAST.032G-10, 5CFAST.064G-10, 5CFAST.128G-10, 5CFAST.256G-10 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 153: Interface Options

    Technical data 2.3.5 Interface options Information: Interface options can only be installed and replaced at the B&R factory. 2.3.5.1 5ACCIF01.FPCC-000 2.3.5.1.1 General information Interface option 5ACCIF01.FPCC-000 is equipped with a POWERLINK interface, 2 CAN bus master interfaces and an X2X Link master interface. In addition, 512 kB nvSRAM is installed. •...
  • Page 154 Technical data Model number 5ACCIF01.FPCC-000 Interfaces POWERLINK Quantity Type Type 4 Variant RJ45, shielded Transfer rate 100 Mbit/s Transfer 100BASE-TX Line length Max. 100 m between two stations (segment length) Quantity Variant 10-pin, male Transfer rate Max. 1 Mbit/s Terminating resistor Type Can be switched on and off with slide switch Type...
  • Page 155 Technical data 2.3.5.1.3.2 CAN bus 1 interface - Pinout The CAN bus 1 interface on the system unit is referred to as "IF option". A terminating resistor can be switched on or off for the CAN bus 1 interface. LED status indicator "L1" indicates whether the terminating resistor is switched on or off.
  • Page 156 Technical data Preferably, the cable material used should have the following properties or deviate only slightly from them in order to achieve an optimal transfer rate. CAN cable Property Signal line Cable cross section 2x 0.25 mm² (24AWG/19), tinned copper stranded wire Wire insulation Conductor resistance ≤82 Ω/km...
  • Page 157 Technical data CAN driver settings The baud rate can be set either with predefined values or via the bit timing register. For additional information, see Automation Help. Bit timing register 1 Bit timing register 0 Baud rate 1000 kbit/s 80h or 00h 500 kbit/s 81h or 01h 250 kbit/s...
  • Page 158 Technical data 2.3.5.1.3.4 X2X Link master interface - Pinout The X2X Link master interface on the system unit is referred to as "IF option". X2X Link master 1)2) The electrically isolated X2X Link master interface is designed as a 10-pin female con- nector.
  • Page 159 Technical data POWERLINK Color red - Error Description The interface is in an error state (failure of Ethernet frames, accumulation of collisions on the network, etc.). If an error occurs in the following states, the red LED is superimposed by the green flashing LED: •...
  • Page 160 Technical data Color green - Status Description Double flash (approx. 1 Hz) State PRE_OPERATIONAL_2 The interface is in state PRE_OPERATIONAL_2. Managing node (MN) The MN starts cyclic communication (cyclic input data is not yet evaluated). The CNs are configured in this state. Controlled node (CN) In this state, the interface can be configured by the MN.

  • Page 161: 5Accif01.Fpcs-000

    Technical data 2.3.5.2 5ACCIF01.FPCS-000 2.3.5.2.1 General information Interface option 5ACCIF01.FPCS-000 is equipped with a POWERLINK, RS485 and CAN bus master interface. In addition, 32 kB FRAM is installed. • 1x POWERLINK interface managing or controlled node • 1x CAN bus master interface •...
  • Page 162 Technical data Model number 5ACCIF01.FPCS-000 Quantity Variant 10-pin, male, not galvanically isolated Transfer rate Max. 1 Mbit/s Terminating resistor Type Can be switched on and off with slide switch Electrical characteristics Power consumption 1.75 W Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Environmental conditions Temperature...
  • Page 163 Technical data Serial interface COM 1)2) COM GND DATA\ DATA Table 136: 5ACCIF01.FPCS-000 - COM interface The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the numbering used by the respective operating system, however.
  • Page 164 Technical data CAN driver settings The baud rate can be set either with predefined values or via the bit timing register. For additional information, see Automation Help. Bit timing register 1 Bit timing register 0 Baud rate 1000 kbit/s 80h or 00h 500 kbit/s 81h or 01h 250 kbit/s...
  • Page 165 Technical data 2.3.5.2.3.5 Shielding For the interfaces on the 10-pin female connector, the shield of the interfaces can be connected to pin "Shield" of the female connector. In addition, there is a functional ground connection on the interface cover of the system unit and a screw point for cable shields that can also be used for the shielded cables.
  • Page 166 Technical data Color green - Status Description State NOT_ACTIVE The interface is in state NOT_ACTIVE or: • Switched off • Starting up • Not configured correctly in Automation Studio • Defective Managing node (MN) The bus is monitored for POWERLINK frames. If no corresponding frame is received in the set time window (timeout), the interface immediately enters mode PRE_OPERATIONAL_1 (single flash).
  • Page 167 Technical data System stop error codes A system stop error can occur due to incorrect configuration or defective hardware. The error code is indicated by four switch-on phases via the red error LED. The switch-on phases are either 150 ms or 600 ms. The error code output is repeated cyclically every 2 seconds. Error description Error code indicated by red "Status"...

  • Page 168: 5Accif01.Fplk-000

    Technical data 2.3.5.3 5ACCIF01.FPLK-000 2.3.5.3.1 General information Interface option 5ACCIF01.FPLK-000 is equipped with 2 female RJ45 connectors; both connectors are connected to an integrated POWERLINK hub. In addition, 512 kB nvSRAM is installed. With the integrated 2-port hub, a simple tree structure, daisy chain wiring or optional ring redundancy can be easily implemented without additional effort.
  • Page 169 Technical data Model number 5ACCIF01.FPLK-000 Interfaces POWERLINK Quantity 1 (integrated 2-port hub) Transfer 100BASE-TX Type Type 4, redundant Design RJ45, shielded Transfer rate 100 Mbit/s Cable length Max. 100 m between two stations (segment length) Electrical characteristics Power consumption 1.75 W Operating conditions Pollution degree per EN 61131-2 Pollution degree 2...
  • Page 170 Technical data 2.3.5.3.3.2 POWERLINK 2 interface - Pinout The POWERLINK 2 interface on the system unit is referred to as "IF option". POWERLINK 2 Wiring S/STP (Cat 5e) RJ45, female Cable length Max. 100 m (min. Cat 5e) LED "Status" Green See status/error LED.
  • Page 171 Technical data POWERLINK Color red - Error Description The interface is in an error state (failure of Ethernet frames, accumulation of collisions on the network, etc.). If an error occurs in the following states, the red LED is superimposed by the green flashing LED: •...
  • Page 172 Technical data Color green - Status Description Double flash (approx. 1 Hz) State PRE_OPERATIONAL_2 The interface is in state PRE_OPERATIONAL_2. Managing node (MN) The MN starts cyclic communication (cyclic input data is not yet evaluated). The CNs are configured in this state. Controlled node (CN) In this state, the interface can be configured by the MN.

  • Page 173: 5Accif01.Fpls-000

    Technical data 2.3.5.4 5ACCIF01.FPLS-000 2.3.5.4.1 General information Interface option 5ACCIF01.FPLS-000 is equipped with a POWERLINK and RS232 interface. In addition, 32 kB FRAM is installed. • 1x POWERLINK interface managing or controlled node • 1x RS232 interface • 32 kB FRAM •...
  • Page 174 Technical data Model number 5ACCIF01.FPLS-000 Electrical characteristics Power consumption 1.5 W Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Environmental conditions Temperature Operation -20 to 55°C Storage -20 to 60°C Transport -20 to 60°C Relative humidity Operation 5 to 90%, non-condensing Storage 5 to 95%, non-condensing Transport...
  • Page 175 Technical data 2.3.5.4.3.3 LED status indicators L2, L3 The LEDs of the interface option are located near the ETH1 interface. LED status indicators Color Status Explanation Green POWERLINK link LED A connection to a POWERLINK network exists. Blinking POWERLINK link LED Data is being transferred.
  • Page 176 Technical data Color green - Status Description State NOT_ACTIVE The interface is in state NOT_ACTIVE or: • Switched off • Starting up • Not configured correctly in Automation Studio • Defective Managing node (MN) The bus is monitored for POWERLINK frames. If no corresponding frame is received in the set time window (timeout), the interface immediately enters mode PRE_OPERATIONAL_1 (single flash).
  • Page 177 Technical data System stop error codes A system stop error can occur due to incorrect configuration or defective hardware. The error code is indicated by four switch-on phases via the red error LED. The switch-on phases are either 150 ms or 600 ms. The error code output is repeated cyclically every 2 seconds. Error description Error code indicated by red "Status"...

  • Page 178: 5Accif01.Fpls-001

    Technical data 2.3.5.5 5ACCIF01.FPLS-001 2.3.5.5.1 General information Interface option 5ACCIF01.FPLS-001 is equipped with a POWERLINK and RS232 interface. In addition, 512 kB nvSRAM is installed. • 1x POWERLINK interface managing or controlled node • 1x RS232 interface • 512 kB nvSRAM •...
  • Page 179 Technical data Model number 5ACCIF01.FPLS-001 Environmental conditions Temperature Operation -20 to 55°C Storage -20 to 60°C Transport -20 to 60°C Relative humidity Operation 5 to 90%, non-condensing Storage 5 to 95%, non-condensing Transport 5 to 95%, non-condensing Mechanical characteristics Weight 25 g Table 168: 5ACCIF01.FPLS-001 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
  • Page 180 Technical data 2.3.5.5.3.3 LED status indicators L2, L3 The LEDs of the interface option are located near the ETH1 interface. LED status indicators Color Status Explanation Green POWERLINK link LED A connection to a POWERLINK network exists. Blinking POWERLINK link LED Data is being transferred.
  • Page 181 Technical data Color green - Status Description State NOT_ACTIVE The interface is in state NOT_ACTIVE or: • Switched off • Starting up • Not configured correctly in Automation Studio • Defective Managing node (MN) The bus is monitored for POWERLINK frames. If no corresponding frame is received in the set time window (timeout), the interface immediately enters mode PRE_OPERATIONAL_1 (single flash).
  • Page 182 Technical data System stop error codes A system stop error can occur due to incorrect configuration or defective hardware. The error code is indicated by four switch-on phases via the red error LED. The switch-on phases are either 150 ms or 600 ms. The error code output is repeated cyclically every 2 seconds. Error description Error code indicated by red "Status"...

  • Page 183: 5Accif01.Fpsc-000

    Technical data 2.3.5.6 5ACCIF01.FPSC-000 2.3.5.6.1 General information Interface option 5ACCIF01.FPSC-000 is equipped with a POWERLINK, RS232 and CAN bus master interface. In addition, 32 kB FRAM is installed. • 1x POWERLINK interface managing or controlled node • 1x CAN bus master interface •...
  • Page 184 Technical data Model number 5ACCIF01.FPSC-000 POWERLINK Quantity Transfer 100BASE-TX Type Type 4 Design RJ45, shielded Transfer rate 100 Mbit/s Cable length Max. 100 m between two stations (segment length) Quantity Design 10-pin, male, not galvanically isolated Transfer rate Max. 1 Mbit/s Terminating resistor Type Can be switched on and off with slide switch...
  • Page 185 Technical data 2.3.5.6.3.2 Serial interface COM - Pinout Serial interface COM on the system unit is referred to as "IF option". Serial interface COM 1)2) RS232 Type RS232, modem not supported, not galvanically isolated UART 16550-compatible, 16 byte FIFO Transfer rate Max.
  • Page 186 Technical data Extension Transfer rate ≤1000 m Typ. 50 kbit/s ≤200 m Typ. 250 kbit/s ≤100 m Typ. 500 kbit/s <20 m Typ. 1 Mbit/s Table 182: CAN - Bus length and transfer rate The specified cable length is only valid with the values specified in Tab.
  • Page 187 Technical data 2.3.5.6.3.5 LED status indicators L1, L2, L3 The LEDs of the interface option are located near the ETH1 interface. LED status indicators Color Status Explanation Yellow The CAN bus terminating resistor is switched The CAN bus terminating resistor is switched off.
  • Page 188 Technical data Color green - Status Description State NOT_ACTIVE The interface is in state NOT_ACTIVE or: • Switched off • Starting up • Not configured correctly in Automation Studio • Defective Managing node (MN) The bus is monitored for POWERLINK frames. If no corresponding frame is received in the set time window (timeout), the interface immediately enters mode PRE_OPERATIONAL_1 (single flash).
  • Page 189 Technical data System stop error codes A system stop error can occur due to incorrect configuration or defective hardware. The error code is indicated by four switch-on phases via the red error LED. The switch-on phases are either 150 ms or 600 ms. The error code output is repeated cyclically every 2 seconds. Error description Error code indicated by red "Status"...

  • Page 190: 5Accif01.Fpsc-001

    Technical data 2.3.5.7 5ACCIF01.FPSC-001 2.3.5.7.1 General information Interface option 5ACCIF01.FPSC-001 is equipped with a POWERLINK, RS232, CAN bus master and X2X Link master interface. In addition, 512 kB nvSRAM is installed. • 1x POWERLINK interface managing or controlled node • 1x CAN bus master interface •...
  • Page 191 Technical data Model number 5ACCIF01.FPSC-001 POWERLINK Quantity Transfer 100BASE-TX Type Type 4 Design RJ45, shielded Transfer rate 100 Mbit/s Cable length Max. 100 m between two stations (segment length) Quantity Design 10-pin, male, galvanically isolated Transfer rate Max. 1 Mbit/s Terminating resistor Type Can be switched on and off with slide switch...
  • Page 192 Technical data 2.3.5.7.3.2 Serial interface COM - Pinout Serial interface COM on the system unit is referred to as "IF option". Serial interface COM 1)2) RS232 Type RS232, modem not supported, not galvanically isolated UART 16550-compatible, 16 byte FIFO Transfer rate Max.
  • Page 193 Technical data Extension Transfer rate ≤1000 m Typ. 50 kbit/s ≤200 m Typ. 250 kbit/s ≤100 m Typ. 500 kbit/s ≤15 m Typ. 1 Mbit/s Table 196: CAN - Bus length and transfer rate The specified cable length is only valid with the values specified in Tab.
  • Page 194 Technical data 2.3.5.7.3.5 Shielding For the interfaces on the 10-pin female connector, the shield of the interfaces can be connected to pin "Shield" of the female connector. In addition, there is a functional ground connection on the interface cover of the system unit and a screw point for cable shields that can also be used for the shielded cables.
  • Page 195 Technical data Color green - Status Description State NOT_ACTIVE The interface is in state NOT_ACTIVE or: • Switched off • Starting up • Not configured correctly in Automation Studio • Defective Managing node (MN) The bus is monitored for POWERLINK frames. If no corresponding frame is received in the set time window (timeout), the interface immediately enters mode PRE_OPERATIONAL_1 (single flash).
  • Page 196 Technical data System stop error codes A system stop error can occur due to incorrect configuration or defective hardware. The error code is indicated by four switch-on phases via the red error LED. The switch-on phases are either 150 ms or 600 ms. The error code output is repeated cyclically every 2 seconds. Error description Error code indicated by red "Status"...

  • Page 197: 5Accif01.Fss0-000

    Technical data 2.3.5.8 5ACCIF01.FSS0-000 2.3.5.8.1 General information Interface option 5ACCIF01.FSS0-000 is equipped with 2 RS422/RS485 interfaces. • 2x RS422/RS485 interfaces • Compatible with APC2100/PPC2100 and APC2200/PPC2200 2.3.5.8.2 Order data Model number Short description Figure Interface options 5ACCIF01.FSS0-000 Interface card - 2x RS422/RS485 interface - For APC2100/ PPC2100/APC2200/PPC2200 - Only available with a new de- vice Optional accessories...
  • Page 198 Technical data Model number 5ACCIF01.FSS0-000 Relative humidity Operation 5 to 90%, non-condensing Storage 5 to 95%, non-condensing Transport 5 to 95%, non-condensing Mechanical properties Weight 25 g Table 206: 5ACCIF01.FSS0-000 - Technical data Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark. For detailed information, see the temperature tables in the user's manual.
  • Page 199 Technical data 2.3.5.8.3.2 Serial interface COM D - Pinout Serial interface COM D on the system unit is referred to as "IF option". Serial interface COMD 1)2)3) RS422/RS485 Type RS422/RS485, galvanically isolated UART 16550-compatible, 16 byte FIFO Transfer rate Max. 115 kbit/s Bus length Max.
  • Page 200 Technical data 2.3.5.8.3.3 RS422 - Bus length and cable type The RTS line must be switched on to activate the transmitter. The maximum transfer rate of 115 kbit/s depends on the cable length and type of cable used. Extension Transfer rate 1200 m Typ.
  • Page 201 Technical data 2.3.5.8.3.5 Terminating resistor One terminating resistor per COM is integrated on the interface option; they are located to the left and right of the RS422/RS485 interface. Both can be switched on or off with a switch. LED status indicators L2 and L3 (see "page"...

  • Page 202: 5Accif01.Ican-000

    Technical data 2.3.5.9 5ACCIF01.ICAN-000 2.3.5.9.1 General information Interface option 5ACCIF01.ICAN-000 is equipped with a CAN bus master interface. • 1x CAN bus master interface • Compatible with APC2100/PPC2100 and APC2200/PPC2200 2.3.5.9.2 Order data Model number Short description Figure Interface options 5ACCIF01.ICAN-000 Interface card - 1x CAN interface - For APC2100/PPC2100/ APC2200/PPC2200 - Only available with a new device...
  • Page 203 Technical data 2.3.5.9.3.1 CAN bus interface - Pinout The CAN bus interface on the system unit is referred to as "IF option". CAN bus 1)2) The electrically isolated CAN bus interface is designed as a female 10-pin connector. Transfer rate Max.
  • Page 204 Technical data Preferably, the cable material used should have the following properties or deviate only slightly from them in order to achieve an optimal transfer rate. CAN cable Property Signal line Cable cross section 2x 0.25 mm² (24AWG/19), tinned copper stranded wire Wire insulation Conductor resistance ≤82 Ω/km...

  • Page 205: 5Accif03.Ceth-000

    Technical data 2.3.5.10 5ACCIF03.CETH-000 2.3.5.10.1 General information Interface option 5ACCIF03.CETH-000 is equipped with 2 10/100/1000BASE-T Ethernet interfaces. • 2x 10/100/1000BASE-T Ethernet interface • Compatible with APC2200/PPC2200 2.3.5.10.2 Order data Model number Short description Figure Interface options 5ACCIF03.CETH-000 Interface card - 2x ETH 10/100/1000 interface - For APC2200/ PPC2200 - Only available with a new device Table 224: 5ACCIF03.CETH-000 - Order data 2.3.5.10.3 Technical data...
  • Page 206 Technical data Ethernet interfaces (ETH Controller Intel I210 RJ45, female Wiring S/STP (Cat 5e) Transfer rate 10/100/1000 Mbit/s Cable length Max. 100 m (min. Cat 5e) LED "Speed" Green 100 Mbit/s 10 Mbit/s LED "Link" Orange (dark) 1000 Mbit/s LED "Speed" LED "Link"...

  • Page 207: Battery Compartment

    Technical data 2.3.6 Battery compartment 2.3.6.1 5ACCBT01.0000-001 2.3.6.1.1 General information The lithium battery is needed to retain BIOS CMOS data and to back up the real-time clock (RTC). The battery is subject to wear and must be replaced if the battery capacity is insufficient (state "Bad"). 2.3.6.1.2 Order data Model number Short description...

  • Page 208: Commissioning

    Commissioning 3 Commissioning 3.1 Installation Danger! • The entire power supply must be disconnected and electrostatic discharge must take place on the housing or ground connection before removing any covers or components from the device and installing or removing any accessories, hardware or cables. •...
  • Page 209 Commissioning Caution! Inclined installation reduces the air convection through the device and thus the maximum per- missible ambient temperature for operation. If there is sufficient external ventilation in an in- clined mounting orientation, the maximum permissible ambient temperature must be checked in each individual case.

  • Page 210: Installing A Panel Pc With An Ap9X3 Panel

    Commissioning • Loss of impermeability Caution! • The gasket must be inspected before installation or reinstallation and at regular intervals according to the requirements of the operating environment. • Replace the entire device if inspection reveals visible scratches, cracks, dirt deposits or excessive wear.
  • Page 211 Commissioning 3. Install the retaining clips on the device. To do this, insert all retaining clips into the recesses (marked with orange circles) on the device. The number of retaining clips may vary depending on the panel. For the exact number, see Fig.

  • Page 212: Installing The Automation Panel 1000 With Retaining Clips

    Commissioning 3.1.3 Installing the Automation Panel 1000 with retaining clips The Panel PC 2200 with AP1000 panel is installed in the installation cutout using retaining clips. The number of retaining clips depends on the panel. The following Automation Panel 1000 panels are installed using retaining clips: •...
  • Page 213 Commissioning 3. Install the retaining clips on the device. To do this, insert all retaining clips into the recesses (marked with orange circles) on the device. The number of retaining clips may vary depending on the panel. For the exact number, see Tab.

  • Page 214: Installing The Automation Panel 1000 With Clamping Blocks

    Commissioning 3.1.4 Installing the Automation Panel 1000 with clamping blocks The Panel PC 2200 with AP1000 panel is installed in the installation cutout using clamping blocks. The number of clamping blocks depends on the panel. The following Automation Panel 1000 panels are installed using clamping blocks: •...
  • Page 215 Commissioning 2. Secure the clamping blocks to the wall or control cabinet plate by alternately tightening the mounting screws with a 3 mm hex screwdriver. The mounting screws push the clamping lever downwards, which in turn clamps the device to the wall or control cabinet plate. The tightening torque for optimal sealing should be max. 0.5 Nm. 2 - 10 mm Wall or control cabinet plate...

  • Page 216: Installation Information For Separate Shipments

    Commissioning 3.1.5 Installation information for separate shipments Information: If the Panel PC 2200 is not delivered as a complete system but as a separate shipment, or if individual components are retrofitted, these components must be enabled in BIOS. To do this, launch BIOS during system startup, load the BIOS default values and save the settings.

  • Page 217: Connecting To The Power Grid

    Commissioning 3.2 Connecting to the power grid Danger! • The entire power supply must be disconnected before removing any covers or components from the device and installing or removing any accessories, hardware or cables. • Remove the power cable from the device and from the power supply. •...

  • Page 218: Connecting The Power Supply To A B&R Device

    Commissioning 3.2.2 Connecting the power supply to a B&R device Danger! The entire power supply to the B&R device must be interrupted. Before connecting the power cable, it must be checked whether it has been disconnected from the voltage source (e.g. power supply). 1.

  • Page 219: Functional Ground Grounding Concept

    Commissioning 3.2.3 Functional ground grounding concept Functional ground is a current path of low impedance between circuits and ground. It is used to improve immunity to interference, for example, and not as a protective measure. It serves only to divert interference, not to protect against contact with persons.

  • Page 220: Connecting Cables

    Commissioning 3.3 Connecting cables When connecting or installing cables, the bend radius specification must be observed. Information: The maximum tightening torque of the locating screws is 0.5 Nm. Locating screws Bend radius Locating screws Figure 126: Connecting cables - Bend radius Information: For the specified bend radius, see the technical data of the respective cable.

  • Page 221: Switching On The Device For The First Time

    Commissioning 3.4 Switching on the device for the first time 3.4.1 General information before switching on the device Checklist Before the device is started up for the first time, the following points must be checked: • Have the installation instructions been observed as described in "Installation"...

  • Page 222: General Instructions For The Temperature Test Procedure

    Commissioning 3.5 General instructions for the temperature test procedure The purpose of these instructions is to explain the general procedure for application-specific temperature tests with B&R industrial PCs or Power Panels. These instructions are only guidelines, however. 3.5.1 Procedure In order to obtain accurate results, the test conditions should correspond to conditions in the field. This means that during the temperature tests, the target application should be running, the PC should be installed in the control cabinet housing that will be used later, etc.

  • Page 223: Evaluation With Burnintest From Passmark

    Commissioning 3.5.2.2 Evaluation with BurnInTest from PassMark If a separate application is not created or used for temperature evaluation, B&R recommends using the BurnInTest software tool from PassMark. The BurnInTest software tool is available in standard and professional versions. In addition to the software package, various loopback adapters (serial, parallel, USB, etc.) and test CDs or DVDs are also available.
  • Page 224 Commissioning Depending on the availability of the loopback adapters and DVDs, appropriate fine tuning must be carried out in the respective test properties. Information: If no USB loopback adapters are available, USB flash drives can also be used. The USB flash drives must be available in Windows as formatted drives.

  • Page 225: Evaluating Temperatures In Non-Windows Operating Systems

    Commissioning 3.5.3 Evaluating temperatures in non-Windows operating systems For applications that do not run in approved operating systems, temperatures can be evaluated using the B&R MTCX Development Kit. The MTCX Development Kit also contains executable EFI sample programs. The implementation guide describes only device-specific functions and not the main functions of the sample pro- grams.

  • Page 226: Touch Screen Calibration

    Commissioning 3.6 Touch screen calibration 3.6.1 Single-touch (analog resistive) 3.6.1.1 Windows 10 IoT Enterprise 2016 LTSB After starting Windows 10 IoT Enterprise 2016 LTSB on a Panel PC for the first time, the appropriate touch screen driver is installed automatically. On all other devices, the touch screen driver must be subsequently installed to operate the touch screen.

  • Page 227: Adjusting The Display Brightness

    Commissioning 3.7 Adjusting the display brightness 1. Open the Control Center in the Control Panel. 2. Select tab "Display". 3. Select a panel from the list. Only the local display (PP Link) and connected panels are displayed in the list. 4.

  • Page 228: Known Problems / Characteristics

    Commissioning 3.8 Known problems / Characteristics • If problems occur with the ETH1 or ETH2 interface (connection abort, slow data transfer, etc.), the Ener- gy-Efficient Ethernet feature can be disabled in the driver as a possible solution. Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 229: Software

    Software 4 Software 4.1 UEFI BIOS options 4.1.1 General information The Unified Extensible Firmware Interface (UEFI) and its predecessor Extensible Firmware Interface (EFI) estab- lish the basic standardized connection between the user and the system (hardware and firmware), the individual components of a computer and the operating system.
  • Page 230 Software BIOS parameter Input options Description BIOS parameter 1 Disables/Enables BIOS parameter 1 Enable(d) Disable(d) BIOS parameter 1 value UINT Defines the value of BIOS parameter 1 Default: 42 Range: 0 to 65535 Resolution: 3 BIOS parameter 2 Displays BIOS parameter 2 BIOS parameter 2.1 Selects mode of BIOS parameter 2.1 BIOS subpa-...

  • Page 231: Uefi Bios Setup And Start Procedure

    Software 4.1.2 UEFI BIOS setup and start procedure UEFI BIOS is enabled immediately after switching on the B&R industrial PC. A check takes place as to whether the setup data from the flash block is "OK". If it is OK, the boot process is started. If it is not OK, the setup default settings are loaded and the boot process is continued.

  • Page 232: Boot Menu

    Software 4.1.3 Boot menu Figure 132: Boot menu Boot menu option Description Continue Continues the default boot process from the boot menu. Boot manager Lists all detected and bootable media. "Boot manager" on page 233. Device management Lists all supported and enabled devices (e.g. RAID and Ethernet). "Device manager"...

  • Page 233: Boot Manager

    Software 4.1.4 Boot manager Figure 133: Boot manager The boot manager lists all detected and bootable legacy or UEFI media. It is possible to select from which of these media the boot process should be performed. Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 234: Device Manager

    Software 4.1.5 Device manager Figure 134: Device manager The device manager lists all compatible and enabled devices. BIOS parameter Setting options Description Primary video BIOS Selects the primary video BIOS Table 231: Device manager Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 235: Setup Utility

    Software 4.1.6 Setup utility Settings can be made in boot menu option "Setup utility". Submenu Setting options Description Main Enter Opens submenu "Main" on page 236 Basic system information is displayed and the system time can be set here. Advanced Enter Opens submenu "Advanced"...

  • Page 236: Main

    Software 4.1.6.1 Main Figure 135: Main BIOS parameter Setting options Description BIOS version Displays the BIOS version Processor type Displays the processor type System bus speed Displays the bus speed System memory speed Displays the memory speed Cache RAM Displays the processor cache Total memory Displays the total memory Channel A - DIMM 0...

  • Page 237: Advanced

    Software 4.1.6.2 Advanced Figure 136: Advanced BIOS parameter Setting options Description OEM features Enter Opens submenu "OEM features" on page 238 Graphics configuration Enter Opens submenu "Graphics configuration" on page 242 IO configuration Enter Opens submenu "IO configuration" on page 243 Security configuration Enter Opens submenu...
  • Page 238 Software 4.1.6.2.1 OEM features Figure 137: Advanced - OEM features BIOS parameter Setting options Description BIOS version Displays the BIOS version MTCX version Displays the MTCX version Realtime environment Disabled Disables/Enables the real-time environment This must be enabled for real-time operating systems such as Automation Runtime. Enabled Automatic firmware update Disabled...
  • Page 239 Software BIOS parameter Setting options Description Interrupt IRQ3 Selects the interrupt for COM A IRQ4 IRQ5 IRQ7 IRQ11 COM B Disable Disables/Enables COM B (LFP touch screen) Enable Base I/O address 0x2E8 Selects the I/O address for COM B 0x2F8 0x338 0x378 0x3E8...
  • Page 240 Software BIOS parameter Setting options Description Battery state Displays the battery state Temperature 1 Displays the current temperature at sensor 1 [°C and °F] Temperature 2 Displays the current temperature at sensor 2 [°C and °F] Temperature 3 Displays the current temperature at sensor 3 [°C and °F] Table 238: Advanced - OEM features - Baseboard Each start/restart increases the value by 1.
  • Page 241 Software BIOS parameter Setting options Description SMART status Displays the S.M.A.R.T. status of the CFast card Displays the WAF of the CFast card Average erase count Displays the average number of erase operations on a block of the CFast card Remaining life Displays the remaining service life of the CFast card [%] Table 242: Advanced - OEM features - SSD monitoring service...
  • Page 242 Software 4.1.6.2.2 Graphics configuration BIOS parameter Setting options Description Rotate screen Disabled Disables or selects rotation of the screen content Rotation takes place clockwise. 90° clockwise 270° clockwise Integrated graphics device Disabled Disables/Enables the integrated graphics device (IGD or GPU) Enabled RC6 (render standby) Disabled...
  • Page 243 Software 4.1.6.2.3 IO configuration BIOS parameter Setting options Description PCI Express configuration Enter Opens submenu "PCI Express configuration" on page 243 SATA configuration Enter Opens submenu "SATA configuration" on page 244 USB configuration Enter Opens submenu "USB configuration" on page 245 Miscellaneous configuration Enter Opens submenu...
  • Page 244 Software BIOS parameter Setting options Description Extra bus reserved Defines the extra bus reserved for bridges after this root bridge Default: 0 Range: 0 to 7 Reserved memory Defines reserved memory [MB] for this bridge Default: 10 Range: 0 to 20 Reserved I/O Defines the reserved I/O range for this bridge Default: 4...
  • Page 245 Software 4.1.6.2.3.3 USB configuration BIOS parameter Setting options Description USB BIOS support Disabled Disables USB support in BIOS or enables USB support (UEFI only) or USB support (UEFI and Legacy Mode) Enabled UEFI only XHCI disable compliance mode False Selects XHCI disable compliance mode True USB port disable override Manually disables/enables USB ports or enables all ports...
  • Page 246 Software 4.1.6.2.4 Security configuration BIOS parameter Setting options Description FW version Displays the TXE firmware version TXE FW capabilities Displays the TXE firmware capabilities TXE FW features Displays the TXE firmware features TXE FW OEM tag Displays the TXE firmware OEM tag TXE firmware mode Displays the TXE firmware mode Target TPM device...

  • Page 247: Security

    Software 4.1.6.3 Security Figure 138: Security BIOS parameter Setting options Description Current TPM device Displays the current TPM device TPM active PCR hash algorithm Displays the current PCR hash algorithm TPM hardware supported hash algorithm Displays the hash algorithms supported by the hardware TrEE protocol version Selects the TrEE protocol version TPM availability...

  • Page 248: Power

    Software 4.1.6.4 Power Figure 139: Power BIOS parameter Setting options Description CPU configuration Enter Opens submenu "CPU configuration" on page 248 Wake on PME Disabled Disables/Enables wake on PME Enabled Wake on RTC from S5 Disabled Disables wake from S5, daily, on a certain day of the month, after a certain sleep time or by operating system utility By every day The configuration for waking by OS utility must be made in the operating system.
  • Page 249 Software BIOS parameter Setting options Description Enabled Active processor cores Disabled Disables/Enables active processor cores If this parameter is disabled, all processor cores are used. Enabling makes it possible to Enabled configure individual processor cores. Core 0 This processor core must always be active. Core 1 Disabled Disables/Enables processor core 1...

  • Page 250: Boot

    Software 4.1.6.5 Boot Figure 140: Boot BIOS parameter Setting options Description Boot type Selects the boot type Dual boot type In dual boot mode, both UEFI and Legacy boot are possible and the CSM is enabled. Legacy boot type In Legacy boot mode, the CSM is enabled. UEFI boot type In UEFI boot mode, the CSM is disabled.
  • Page 251 Software BIOS parameter Setting options Description Enable to boot EFI devices before legacy devices. Disable to boot legacy devices before Enabled EFI devices. Timeout Delay time until the boot list is processed [s]. Default: 0 Range: 0 to 10 Automatic failover Disabled Disables/Enables automatic failover Enabled...
  • Page 252 Software 4.1.6.5.2 Legacy BIOS parameter Setting options Description Normal boot menu Normal Selects the boot order type Advanced Boot type order Enter Opens submenu "Boot type order" on page 252 Other Enter Opens submenu Floppy disk Enter Hard disk drive Enter Opens submenu "Hard disk drive"...

  • Page 253: Exit

    Software 4.1.6.6 Exit Figure 141: Exit BIOS parameter Setting options Description Exit saving changes Enter Saves changes and restarts Save changes without exit Enter Saves changes Some settings only take effect after a restart. Exit discarding changes Enter Discards changes and exits Load optimal defaults Enter Loads system-optimized default values...

  • Page 254: Upgrade Information

    Software 4.2 Upgrade information Warning! The UEFI BIOS and firmware of B&R devices must always be kept up to date. New versions can be downloaded from the B&R website (www.br-automation.com). 4.2.1 UEFI BIOS upgrade An upgrade may be necessary for the following reason, for example: •...

  • Page 255: Procedure In The Efi Shell

    Software 4.2.1.2 Procedure in the EFI shell Caution! The PC is not permitted to be switched off or reset while performing an upgrade! 1. Download the ZIP file from the B&R website (www.br-automation.com). 2. Unzip the ZIP file and copy the files to a USB flash drive formatted in FAT16 or FAT32. Alternatively, a CFast card can also be used.

  • Page 256: Procedure In The Efi Shell

    Software 4.2.2.2 Procedure in the EFI shell 1. Download the ZIP file from the B&R website (www.br-automation.com). 2. Unzip the ZIP file and copy the files to a USB flash drive formatted in FAT16 or FAT32. Alternatively, a CFast card can also be used. 3.

  • Page 257: Automatic Firmware Update

    Software 4.2.2.3 Automatic firmware update With the APC2200/PPC2200, it is possible to perform firmware updates automatically. For this, parameter "Automatic firmware update" must be enabled in BIOS (see "Advanced - OEM features" on page 238). A current firmware upgrade can be downloaded directly from the Downloads section of the B&R website (www.br-automation.com).
  • Page 258 Software • Windows 10 IoT Enterprise 2016 LTSB • Windows 10 IoT Enterprise 2015 LTSB • Windows Embedded 8.1 Industry Pro • Windows 7 Professional/Ultimate • Windows Embedded Standard 7 Premium • B&R Linux 8 and 9 No guarantee can be given for multi-touch or single-touch operation, compatibility and functionality for operation with other operating systems and/or individual touch screen drivers.

  • Page 259: Windows 10 Iot Enterprise 2016 Ltsb

    Software 4.4 Windows 10 IoT Enterprise 2016 LTSB 4.4.1 General information Windows 10 IoT Enterprise 2016 LTSB is the successor to Windows 10 IoT Enterprise 2015 LTSB and based on new Windows 10 technology. The operating system also offers a higher level of protection for industrial applications through additional lockdown functions.

  • Page 260: Drivers

    Software 4.4.6 Drivers The operating system contains all drivers required for operation. If an older driver version is installed, the latest version can be downloaded and installed from the B&R website (www.br-automation.com). It is important to ensure that "Unified Write Filter (UWF)" is disabled. Information: Necessary drivers must be downloaded from the B&R website, not from manufacturer websites.

  • Page 261: Supported Display Resolutions

    Software Information: These settings as well as the features not included in the LTSB version cause different behavior com- pared to a standard Windows 10 Enterprise installation. 4.4.9 Supported display resolutions Per Microsoft requirements, Windows 10 IoT Enterprise 2016 LTSB requires SVGA resolution (800 x 600) or higher to enable full operation of the Windows user interface (including system dialog boxes, apps, etc.).

  • Page 262: B&R Linux 9 (Gnu/Linux)

    Software 4.5 B&R Linux 9 (GNU/Linux) 4.5.1 General information Linux or GNU/Linux are usually free, UNIX-like multi-user operating systems based on the Linux kernel and fun- damentally on GNU software. Wide (also commercial) distribution was made possible starting in 1992 by licensing the Linux kernel under the GPL.

  • Page 263: Drivers

    Software 4.5.6 Drivers Current drivers for all approved operating systems are available for download in the Downloads section of the B&R website (www.br-automation.com). Information: Necessary drivers must be downloaded from the B&R website, not from manufacturer websites. Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 264: B&R Automation Device Interface (Adi) Control Center

    Software 4.6 B&R Automation Device Interface (ADI) Control Center The Automation Device Interface (ADI) allows access to specific functions of B&R devices. The settings of these devices can be read out and changed in Windows using the B&R Control Center in the Control Panel. Figure 145: B&R Control Center screenshots - Examples Information: The displayed temperature and voltage values (e.g.

  • Page 265: Installation

    Software • Setting the SDL equalizer value for the SDL cable adjustment • Changing the user serial ID Depending on the version, a detailed description of the Control Center is available either in the integrated help documentation or in the user documentation. 4.6.2 Installation The B&R Automation Device Interface (ADI) driver (also includes the Control Center) and user documentation can be downloaded at no cost from the Downloads section of the B&R website (www.br-automation.com).

  • Page 266: B&R Automation Device Interface (Adi) Development Kit

    Software 4.7 B&R Automation Device Interface (ADI) Development Kit This software allows functions of the B&R Automation Device Interface (ADI) to be accessed from Windows appli- cations created with Microsoft Visual Studio, for example: Figure 146: ADI Development Kit screenshots Features: •...

  • Page 267: B&R Automation Device Interface (Adi) .Net Sdk

    Software 4.8 B&R Automation Device Interface (ADI) .NET SDK This software allows functions of the B&R Automation Device Interface (ADI) to be accessed from .NET applications created with Microsoft Visual Studio. Figure 147: ADI .NET SDK screenshots Features: • ADI .NET class library •...

  • Page 268: B&R Key Editor

    Software 4.9 B&R Key Editor A frequently occurring requirement for panels is adapting function keys and LEDs to the application software. With the B&R Key Editor, individual adaptation to the application is possible quickly and easily. Figure 148: B&R Key Editor screenshots Features: •...

  • Page 269: B&R Kcf Editor

    Software 4.10 B&R KCF Editor The B&R KCF Editor can be used as a simple alternative to the B&R Key Editor. It can also be used to adapt function keys and LEDs to the application software. In contrast to the B&R Key Editor, operation does not take place using a graphical representation of the device, but via a simple Windows dialog box.

  • Page 270: Hmi Service Center

    Software 4.11 HMI Service Center 4.11.1 5SWUTI.0001-000 4.11.1.1 General information The HMI Service Center is software for testing B&R industrial PCs and Automation Panels. Testing covers different categories such as COM, network and SRAM. The test system consists of a USB flash drive with the Windows PE operating system and HMI Service Center installed on it.

  • Page 271: Standards And Certifications

    Standards and certifications 5 Standards and certifications 5.1 Directives and declarations 5.1.1 CE marking All directives applicable to the respective product and their harmonized EN standards are met. 5.1.2 EMC Directive The products meet the requirements of EU directive "Electromagnetic compatibility 2014/30/EU" and are designed for industrial applications: EN 61131-2:2007 Programmable controllers - Part 2: Equipment requirements and tests...

  • Page 272: Certifications

    Standards and certifications 5.2 Certifications Danger! A complete system can only receive certification if ALL individual components installed and connected in it have the corresponding certifications. If an individual component is used that does NOT have the corresponding certification, the complete system will also NOT be certified. B&R products and services comply with applicable standards.

  • Page 273: Rcm

    Standards and certifications 5.2.4 RCM Products with this mark are tested by an accredited test laboratory and certified by the ACMA. The mark is valid for Australia/Oceania and facilitates the certification of your machines and systems in this economic area (based on EU conformity). Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 274: Accessories

    Accessories 6 Accessories The following accessories have undergone functional testing by B&R in connection with the device used and can be operated with this device. Possible limitations regarding operation with individual components other than the complete system must be taken into account, however. All individual specifications of the components must be observed when operating the complete system.

  • Page 275: Power Supply Connectors

    Accessories 6.2 Power supply connectors 6.2.1 0TB103.9x 6.2.1.1 General information 1-row 3-pin terminal block 0TB103 is used for the power supply. 6.2.1.2 Order data Model number Short description Figure Terminal blocks 0TB103.9 Connector 24 VDC - 3-pin female - Screw clamp terminal block 3.31 mm²...

  • Page 276: Terminal Block For If Options

    Accessories 6.3 Terminal block for IF options 6.3.1 0TB1210.3100 6.3.1.1 General information 2-row 10-pin terminal block TB1210 is used to connect to the interfaces of various interface options. 6.3.1.2 Order data Model number Short description Figure Terminal blocks 0TB1210.3100 Connector 300 VDC - 10-pin female - Cage clamp terminal block - Protected against vibration by the screw flange Table 271: 0TB1210.3100 - Order data 6.3.1.3 Technical data...

  • Page 277: Usb Flash Drives

    Accessories 6.4 USB flash drives 6.4.1 5MMUSB.xxxx-01 6.4.1.1 General information USB flash drives are easily replaceable storage media. Due to the fast data transfer (USB 2.0), USB flash drives offer optimal values for use as portable storage media. Without additional drivers, the USB flash drive immediately reports itself as another drive from which data can be read or to which data can be written (hot plugging).
  • Page 278 Accessories Model number 5MMUSB.2048-01 5MMUSB.4096-01 Support Operating systems Windows 10 IoT Enterprise LTSB 64-bit Windows Embedded 8.1 Industry Pro 32-bit Windows Embedded 8.1 Industry Pro 64-bit Windows 7 32-bit Windows 7 64-bit Windows Embedded Standard 7 32-bit Windows Embedded Standard 7 64-bit Windows XP Professional Windows XP Embedded Windows 2000...

  • Page 279: Temperature/Humidity Diagram

    Accessories 6.4.1.4 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 150: 5MMUSB.xxxx-01 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 280: 5Mmusb.032G-02

    Accessories 6.4.2 5MMUSB.032G-02 6.4.2.1 General information USB flash drives are easily replaceable storage media. Due to the fast data transfer (USB 3.0), USB flash drives offer optimal values for use as portable storage media. Without additional drivers, the USB flash drive immediately reports itself as another drive from which data can be read or to which data can be written (hot plugging).

  • Page 281: Temperature/Humidity Diagram

    Accessories Model number 5MMUSB.032G-02 Relative humidity Operation 10 to 95%, non-condensing Storage 10 to 95%, non-condensing Transport 10 to 95%, non-condensing Vibration Operation 7 to 2000 Hz: 20 g Storage 7 to 2000 Hz: 20 g Transport 7 to 2000 Hz: 20 g Shock Operation 1500 g, 0.5 ms...

  • Page 282: Replacement Parts

    Accessories 6.5 Replacement parts The following replacement parts can be ordered for the PPC2200: • Mounting screws for PPC2200 • Slot cover for interfaces • Cover for CFast slot • Battery compartment 5ACCRPC2.0003-000 (corresponds to the variant supplied with the configuration "5ACCBT01.0000-001"...

  • Page 283: Servicing/Maintenance

    Servicing/Maintenance 7 Servicing/Maintenance The following chapter describes the servicing and maintenance work that can be carried out by a qualified and trained end user. Information: Only components approved by B&R are permitted to be used for servicing and maintenance work. 7.1 Cleaning Danger! The device is only permitted to be cleaned when it is switched off in order to avoid triggering uninten-...

  • Page 284: User Tips For Increasing The Service Life Of The Display

    Servicing/Maintenance 7.2 User tips for increasing the service life of the display 7.2.1 Backlight The service life of the backlight is specified by its "half-brightness time". An operating time of 50,000 hours would mean that the display brightness would still be 50% after this time. 7.2.1.1 How can the service life of backlights be extended? •...

  • Page 285: Replacing Cfast Cards

    Servicing/Maintenance 7.4 Replacing CFast cards Caution! The CFast card is only permitted to be replaced when the power is switched off. Improper handling of the ejection lever (e.g. applying a large amount of force) can lead to a defect in the ejector mechanism.

  • Page 286: Changing The Battery

    Servicing/Maintenance 7.5 Changing the battery The following instructions apply to battery compartments 5ACCBT01.0000-001 and 5ACCRPC2.0003-000. 1. Disconnect the power supply cable to the B&R industrial PC (disconnect the power cable). 2. Carry out electrostatic discharge on the housing or at the ground connection. 3.

  • Page 287: Repairs/Complaints And Replacement Parts

    Servicing/Maintenance 7.6 Repairs/Complaints and replacement parts Danger! Unauthorized opening or repair of the device may result in personal injury and/or serious damage to property. Therefore, do not carry out any repairs yourself. Repairs are only permitted to be carried out by authorized qualified personnel at the manufacturer's premises.

  • Page 288: Mtcx

    Appendix A Appendix A A.1 MTCX The MTCX controller (FPGA processor) is located on the mainboard (part of each system unit) of the APC2200 and PPC2200 device. MTCX Figure 155: MTCX controller - Position The MTCX is responsible for the following monitoring and control functions: •...

  • Page 289: Abbreviations

    Appendix A A.2 Abbreviations Abbreviation Stands for Description Normally closed Stands for a normally closed relay contact. Not connected Used in pinout descriptions if a terminal or pin is not connected on the module side. Not defined Stands for an undefined value in technical data tables. This may be because the cable manufacturer has not provided a value for certain technical data.

  • Page 290: Chemical Resistance

    Appendix A A.4 Chemical resistance AP1000 single-touch panels are manufactured with the Autotex panel overlay. AP9x3 single-touch panels are manufactured with the Autotex panel overlay starting with the following revision: • 5AP923.1215-00 ≥ revision B8 • 5AP923.1505-00 ≥ revision B8 •...
  • Page 291 Appendix A AP9x3 and AP1000 multi-touch panels are equipped with a continuous glass surface. Coated front Touch screen (frame) Figure 158: Multi-touch panel with glass surface Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

  • Page 292: Autotex Panel Overlay (Polyester)

    Appendix A A.4.1 Autotex panel overlay (polyester) Unless otherwise specified, the panel overlay is resistant to the following chemicals per DIN 42115 Part 2 when exposed for up to 24 hours without visible changes: • Acetaldehyde • Diethyl ether • Caustic soda < 40% •...

  • Page 293: Aluminum Panel Overlay

    Appendix A A.4.2 Aluminum panel overlay Unless otherwise specified, the panel overlay is resistant to the following chemicals per DIN 42115 Part 2 when exposed for up to 24 hours without visible changes: • Acetaldehyde • DRM/PM • Methylbenzene • Acetone •...

  • Page 294: Touch Screen

    Appendix A A.4.4 Touch screen AMT touch screen (single-touch) Unless otherwise specified, the AMT touch screen is resistant to the following chemicals when exposed for up to 1 hour (at 25°C) with no visible changes: • Acetone • Ethanol • Methyl ethyl ketone •...

  • Page 295: Touch Screen

    Appendix A A.5 Touch screen A.5.1 5-wire AMT touch screen (single-touch) A.5.1.1 Technical data Information: The following specified characteristic data, features and limit values are only valid for these individual components and may differ from those of the complete system. The data specified for the complete system applies to the complete system in which this individual component is used, for example.

  • Page 296: Touch Screen (Multi-Touch Generation 2)

    Appendix A A.5.2 3M touch screen (multi-touch generation 2) A.5.2.1 General information Valid for the following products: • 5AP933.156B-00 with Rev. ≤ C0 • 5AP933.185B-00 with Rev. ≤ C0 • 5AP933.215C-00 with Rev. ≤ C0 • 5AP933.240C-00 with Rev. ≤ C0 A.5.2.2 Technical data Information: The following specified characteristic data, features and limit values are only valid for these individual...

  • Page 297: Touch Screen (Multi-Touch Generation 3)

    Appendix A A.5.3 3M touch screen (multi-touch generation 3) A.5.3.1 General information Valid for the following products: • 5AP1130.0702-000 • 5AP1130.101E-000 • 5AP1130.121E-000 • 5AP1130.156C-000 • 5AP1130.185C-000 • 5AP933.156B-00 with Rev. ≥ D0 • 5AP933.185B-00 with Rev. ≥ D0 • 5AP933.215C-00 with Rev. ≥ D0 •...

  • Page 298: Temperature/Humidity Diagram

    Appendix A A.5.3.3 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 161: 3M touch screen generation 3 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...
  • Page 299 Model number index 0TB103.9................................275 0TB103.91................................275 0TB1210.3100..............................276 5ACCBT01.0000-001............................207 5ACCIF01.FPCC-000............................153 5ACCIF01.FPCS-000............................161 5ACCIF01.FPLK-000............................168 5ACCIF01.FPLS-000............................173 5ACCIF01.FPLS-001............................178 5ACCIF01.FPSC-000............................183 5ACCIF01.FPSC-001............................190 5ACCIF01.FSS0-000............................197 5ACCIF01.ICAN-000............................202 5ACCIF03.CETH-000............................205 5AP1120.0573-000..............................89 5AP1120.0702-000..............................95 5AP1120.101E-000..............................99 5AP1120.1043-000...............................103 5AP1120.1214-000...............................115 5AP1120.121E-000.............................. 118 5AP1120.1505-000...............................122 5AP1120.156B-000.............................. 131 5AP1120.1906-000...............................138 5AP1130.0702-000..............................97 5AP1130.101E-000.............................. 101 5AP1130.121E-000..............................
  • Page 300 Publishing information Publishing information B&R Industrial Automation GmbH B&R Strasse 1 5142 Eggelsberg Austria Telephone: +43 7748 6586-0 Fax: +43 7748 6586-26 office@br-automation.com Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation...

This manual is also suitable for:

5ap1120.0573-0005ap1120.0702-0005ap1120.101e-0005ap1120.1214-0005ap1120.121e-0005ap1120.1505-000 ... Show all

Table of Contents

Save PDF