Ibiza sound MX401 Instruction Manual page 34

MASTER CONTROL SECTION:
⑥ (▮) ¾ (7 /8) (• ) USB Select switch
Stereo channel signal selector switch.
⑦ MAIN GRAPHIC EQUALIZER
This 5-band EQ adjusts the sound signal from the MAIN OUT jack. The EQ cuts or boosts all frequency
bands (100Hz / 400Hz / 1kHz / 3kHz / 8kHz) within the range of ±12dB.
⑧ Delay Control
Adjusts the delay time of the internal effect unit.
⑨ REPEAT Control
Adjusts the depth of the internal digital effects.
⑩ EFFECT Fader Control
Adjusts the signal level of internal effects to the MAIN bus.
⑪ PHANTOM +48V switch
① TAPE OUT IN (L, R) Jacks
You can connect these RCA pin jacks to an
external recorder such as an MD recorder
to record the signal output from the MAIN
OUT jacks. Connect IN to send the signal
to MAIN.
② LINE input jacks (stereo channel)
These are unbalanced phone jack type
stereo line inputs.
③ PHONES Jacks
Connect a pair of headphones to this
stereo phone jack. There are 2x Jacks: A &
B.
④ MAIN OUT (L, R) jacks
These jacks send the mixer's stereo
output. E.g. you can connect these jacks to
a power amplifier driving the main
speaker. When you record the mixer's
stereo output using the MAIN OUT Master
fader to control the level, you can also
connect these jacks to the recording
device.
⑤ Music Player
This is a high sound quality music player.
Insert the USB device containing the MP3,
WMA music files into the USB port and
play the music via the stereo channel (USB
select switch).
34