Advertisement
ASSEMBLY MANUAL
Date:
04.06.2018
Scope of delivery
The following parts are included in the helmet com-
partment:
‡ 2× Rear view mirrors
‡ 1× Battery with battery fluid container
‡ 1× Box with 2 keys, 1 key tag and user manual
‡ 1× Key attached to the vehicle
‡ 1× Owner´s tool kit
‡ 2× Handlebar weights
‡ 1× Vehicle identification number cover
‡ 1× Battery retaining plate bottom
‡ 1× Battery retaining plate top
‡ 2× M8 bolt
‡ 5× M5 bolt
Assembling of the components
•
Screw the two bolts (1) into the shown holes.
•
Mount both mirrors and fix the nuts, first the lower
one (2) and then the upper one (3).
ATTENTION:
the left mirror has a right-hand thread
the right mirror has a left-hand thread
•
Remove the cover (4), inserted the handlebar
weights (5) into the handlebar end and tighten the
bolt inside the handlebar weights. Then mount the
cover. again.
ATTENTION:
On the right side of the handlebar, make sure that
the handlebar weight is not inserted too far into
the handlebar, otherwise the proper function of the
throttle will be affected. AFTER INSTALLATION,
CHECK WETHER THE THROTTLE LEVER IS WOR-
KING PROPERLY!
Model:
VIN No.:
Page 2 / 6
Version:
V50 Special, V125 Special, V200 Special
VDLL*************
ASSEMBLY MANUAL LAMBRETTA V50, V125, V200
1
1
Created by:
Schorm
Confirmed by:
Groll
2
3
5
4
Advertisement
