Alemite 4035 Service Manual

Description
This model oil gun is designed with Buna-N (Nitrile)
seals to dispense oil.
The gun delivers slightly more than 1 fluid ounce
3
(30.8 cm ) of product in seven cycles
[2-strokes per cycle - one upward and one downward].
Operation
Fill the Gun
1. Unscrew Cylinder (13) from Head Assembly (3). See
Figure 2.
2. Pull Rod and Handle Assembly (10) fully to the back
of the Cylinder and allow it to latch.
This document contains confidential information that is the property of Alemite Corporation
670733
and is not to be copied, used, or disclosed to others without express written permission.
Service Guide
Lever-Operated Oil Gun
Figure 1 Lever-Operated Oil Gun Model 4035
Alemite LLC
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
©
Copyright 2009 by Alemite LLC
3. Fill the Cylinder with fluid.
4. Screw the Head Assembly onto the Cylinder.
• Tighten the Head Assembly securely.
5. Release the Rod and Handle Assembly from Latch (11).
6. Push the Rod and Handle Assembly into the Cylinder
until it seats on the Latch.
Specifications
Reservoir Capacity Delivery/Cycle
Fluid Ounces Liter Fluid Ounce
26 0.77 0.15
Table 1 Lever-Operated Oil Gun Specifications
4035
Maximum
Operating Pressure
3
psi Bars
cm
4.4 1800 124
SER 4035
Revision (9-09)