Download Print this page

SCALIX KS-22 Operating Instructions

5kg electronic weighting scale

Electronic Weighting Scale

OPERATING INSTRUCTIONS

Please read these instructions before operating the scale.

1. Follow all basic safety precautions for all equipment

when using the scale.

2. Do not use the scale in direct sunlight.

3. Do not use the scale in varying heat environments or

near heating appliances

4. Use the scale only for its intended purpose.

5. Clean with a soft cloth. DO NOT immerse into water.

DO NOT use an abrasive or corrosive cleaner

SCALIX

5Kg

MODEL KS-22

Table of Contents

Need help?

Do you have a question about the KS-22 and is the answer not in the manual?

Page 1 SCALIX Electronic Weighting Scale MODEL KS-22 OPERATING INSTRUCTIONS Please read these instructions before operating the scale. 1. Follow all basic safety precautions for all equipment when using the scale. 2. Do not use the scale in direct sunlight. 3. Do not use the scale in varying heat environments or near heating appliances 4.
Page 2 Activating the scale. The battery compartment is in the base of the scale. It requires 1 CR-2032 3V Lithium battery. Auto-Power off activates after minute of no activity. If the battery level falls below the required capacity “Lo” will be displayed. Place the scale in a flat and level surface.
Page 3 Plus/Minus Weighing For check weighing applications place a sample on the pan. Press “On/Off/Zero”. Remove the sample. Place the next sample on the pan and any difference will be displayed as a PLUS or MINUS value. Calibration ATP Instrumentation Ltd offer fully traceable calibration. This should be carried out at least once a year.