Table of Contents
Advertisement
3.2
Commissioning
Programming
Deleting memory
Radio receiver
Press programming button briefly.
ð The LED blinks once.
Press the flush button of the radio transmitter to be programmed
within 30 seconds.
In the case of dual volume radio transmitters, push one of the two
flush buttons.
ð The LED blinks three times.
Repeat the process to program additional transmitters (maximum 32
per receiver).
Keep programming button pressed for approx. 8 seconds.
ð The LED blinks twice.
Release programming button.
ð The radio receiver's memory has been deleted.
Handling
9 from 10
Advertisement
Table of Contents
