Summary of Contents for Viega 8350.35
- Page 1 Radio receiver Instructions for Use for the reception of a flush actuation via radio signal Model Year built: 8350.35 from 06/2012 en_INT...
- Page 2 Radio receiver 2 from 10...
-
Page 3: Table Of Contents
Table of contents Table of contents About these instructions for use Target groups Labelling of notes About this translated version Product information Intended use 2.1.1 Areas of use Product description 2.2.1 Overview 2.2.2 Operating mode 2.2.3 Extensions Handling Assembly Commissioning Disposal Radio receiver 3 from 10... -
Page 4: About These Instructions For Use
This restriction does not extend to possible operating instructions. The installation of Viega products must take place in accordance with the general rules of engineering and the Viega instructions for use. -
Page 5: About This Translated Version
About these instructions for use About this translated version This instruction for use contains important information about the choice of product or system, assembly and commissioning as well as intended use and, if required, maintenance measures. The information about the products, their properties and application technology are based on the current standards in Europe (e. -
Page 6: Product Information
2 Product information Intended use 2.1.1 Areas of use The radio receiver may only be used with the following Viega products: Compatible WC flush plates: Visign for Public 5, model 8326.16 Visign for Public 6, model 8326.15 Visign for Care sensitive, model 8352.21 Visign for More 100 sensitive, model 8352.11... -
Page 7: Extensions
Product information 2.2.3 Extensions Multiple sensors can be connected to a control at the same time using the extension cable adapter model 8350.36. This is how e. g. a button can be combined with the radio receiver. Fig. 2: Extension cable adapter model 8350.36 Fig. -
Page 8: Handling
Handling 3 Handling Assembly Insert radio receiver into the bracket of the control. Create plug connection from radio receiver to control. Radio receiver 8 from 10... -
Page 9: Commissioning
Handling Commissioning Programming Press programming button briefly. ð The LED blinks once. Press the flush button of the radio transmitter to be programmed within 30 seconds. In the case of dual volume radio transmitters, push one of the two flush buttons. ð... -
Page 10: Disposal
Handling Disposal Separate the product and packaging materials (e. g. paper, metal, plastic or non-ferrous metals) and dispose of in accordance with valid national legal requirements. Radio receiver 10 from 10...