State Water Heaters SRGSS01806 Specification Sheet page 2

SELECT
Residential Gas Water Heaters
SERIES
GS6 40 YRRT 300 75
300
100
100
100
100
GS6 40 & 50 YRRT models are certfied from sea level to 10,100 ft. elevation all other models are certified to 7,700 ft. elevation
Flammable Vapor Ignition Resistant (FVIR) Water Heaters
State FVIR design meets or exceeds the American National Standards Institute standards (ANSI Z21.10.1 - CSA 4.1) that deal with
the accidental or unintended ignition of flammable vapors, such as those emitted by gasoline.
Feature a sealed combustion chamber with air intake filter and a flame arrestor built into the water heater base. In addition, a thermal
cutoff (TCO) device, is designed to shut off gas flow to the burner and pilot if
poor combustion is detected.
If flammable vapors accidentally enter the
combustion chamber, the arrestor is designed
so flames burn off the top surface and can not
escape down through the arrestor.
For complete information on limited warranties, consult written warranty,
or contact the State Customer Care Center, 1-800-365-0024.
State Industries, Inc. reserves the right to make product changes or improvements without prior notice.
For more information on Select
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SRGSS01806
®
300/301 Series
.60 40 50,000 51
50
A. Industry standard thermopile
B. Large View Port for easy burner inspection
0
C. 360 combustion air filter
D. Thermal Cutoff (TCO) with manual reset
®
contact:
Revised March 2012
R E S I D E N T I A L
16 61-3/4 58-1/4 20
57
60-3/4
(GS6 75 CRRS)
65 HR RT: 62,500
ANODE ROD
(OPTIONAL T&P
LOCATION)
HOT
CONNECTION
1/2" GAS
CONNECTION
Maximum Hydrostatic Working Pressure: 150 PSI.
®
Low Lead Content
8 51-3/4 4
13
50-1/4
13
COLD
CONNECTION
E
C
VALVE
A
B
F
D
138
153