Download Print this page
State Water Heaters SRGSS01806 Specification Sheet
State Water Heaters SRGSS01806 Specification Sheet

State Water Heaters SRGSS01806 Specification Sheet

Residential gas water heaters select 300/301 series

Advertisement

Quick Links

SELECT
Residential Gas Water Heaters
®
State Select
gas water heaters feature an FVIR Compliant design, which meets the ANSI Z21.10.1-CSA 4.1
standards for flammable vapor ignition resistance.
300/301 Series
For more information on Select
®
contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SRGSS01806
®
These High Output Models Have
• Capacity/input combinations up to 98 gallons/75,100 BTU produce recoveries up to 81
gallons per hour, with deliverable hot water up to 150 gallons.
Intelligent Control Logic
• The internal microprocessor provides enhanced operating parameters and tighter differentials
for precise sensing and faster heating response to optimize performance.
Self-powered Electronic Gas Valve
• Uses a thermopile to generate the power needed to operate the electronic gas control without
requiring an external power source.
Diagnostics
• The electronic gas control incorporates an LED status indicator that monitors system
operation & service diagnostics.
Diffuser Dip Tube
• Reduces lime and sediment buildup, maximizes hot water output
• Made from State PEXAN
long-term exposure to temperatures up to 400ºF
®
Green Choice
• Patented "Eco-Friendly" burner design reduces NOx emissions by up to 33%
and complies with 40 ng/j requirements for low NOx emissions.
Easy-to-Light Piezo Ignitor
• For fast "one-hand" pilot ignition
Glasslined Tank with Aluminum Anode Rod
• For long-lasting protection against build up and corrosion
Durable, Brass Tamper-Resistant Drain Valve
CSA Certified and ASME Rated T&P Relief Valve
Design-Listed by CSA International
• Certified at 300 PSI test pressure and 150 PSI working pressure
• Listed according to ANSI Z21.10.1 - CSA 4.1 standards governing storage-type water heaters
• Meets the Federal Energy Efficiency Standards effective January 20, 2004, according to
the National Appliance Energy Conservation Act (NAECA) of 1992 and meets the thermal
efficiency and standby loss requirements of the U.S. Department of Energy and current
editions of ASHRAE/IESNA 90.1.
• Additional code compliance: UBC, CEC, SBCC, CABO, HUD and BOCA National Codes
FVIR Compliant Design
Simplifies Service
• Uses industry standard thermopile
• Burner operation may be viewed through new enlarged sight glass
6-Year Limited Tank and Parts Warranty
Consult written warranty or contact State Water Heaters for complete information
Revised March 2012
R E S I D E N T I A L
, a cross-linked polymer that can withstand
Gas Burner
®
Low Lead Content

Advertisement

loading

Summary of Contents for State Water Heaters SRGSS01806

  • Page 1 State Water Heaters 500 Tennessee Waltz Parkway, Ashland City, TN 37015 800.365.0024 Toll-free USA www.statewaterheaters.com SRGSS01806 Revised March 2012 These High Output Models Have • Capacity/input combinations up to 98 gallons/75,100 BTU produce recoveries up to 81 gallons per hour, with deliverable hot water up to 150 gallons.
  • Page 2 For complete information on limited warranties, consult written warranty, or contact the State Customer Care Center, 1-800-365-0024. State Industries, Inc. reserves the right to make product changes or improvements without prior notice. ® For more information on Select...

This manual is also suitable for:

Gs6 40 yrrtGs6 65 yrrtGs6 75 xrrsGs6 100 xrrtGs6 50 ybpdt