State Water Heaters Sandblaster SCGSS00407 Specification Sheet

SANDBLASTER SBN
Low NO Commercial Gas Water Heaters
x
80% Thermal Efficiency
Front, Top or Rear Water Connections
Hydro Cannon Self Cleaning Device
Anodes – Long lasting stainless steel core anodes.
On/Off Power Switch – Eliminates the need
to wire a separate electrical connection box.
Intermittent Ignition Device – Eliminates
standing pilot and provides flame failure response
in less than one second.
Glass Lined Tank – Glass is applied after the
complete tank has been assembled to give a
seamless barrier against corrosion by hot water.
For more information on Sandblaster
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
State Water Heaters' Sandblaster is the original Self Cleaning commercial gas water heater, with
a proven design that automatically reduces sediment buildup, the number one threat to any water
heater's life expectancy and energy fficiency.
The new computer designed Hydro Cannon self cleaning device
injects cold water into the tank under pressure and then uses a
venturi action to create self cleaning turbulence. Self Cleaning
action keeps sediment in suspension, and keeps it moving, so it
does not get a chance to settle down. Sediment that would
otherwise build up in the tank is harmlessly carried out when hot
water is drawn. With reduced sediment buildup, Sandblaster
commercial water heaters retain their rated efficiency longer,
last longer, and help keep water heating costs down!
Low NO
x
ASME Construction
Induced Draft Built-In Blower
mounted and wired. No draft hood or barometric damper required.
Hydro Cannon Self-Cleaning Feature
automatically reduces harmful sediment buildup inside the tank. Sandblaster
energy-efficient, so it saves money throughout its life.
Foam insulation
standard fiberglass.
CSA Certified and ASME Rate T&P Relief valve
Factory-installed Energy Cut-Off ("ECO") safety switch
Tank Inspection Port
Maximum Hydrostatic Working Pressure: 160 psi
Three Water Connection Options
on the top, front and rear offering installation flexibility (Hydro Cannon device on front
connection only).
3-Year or Optional 5-Year Tank Warranty
Fully Tested for Safety and Performance – Design certified by the Underwriter's
Laboratory for 180°F hot water service. Meets rigid requirements of the National Sanitation
Foundation when equipped with optional leg kit. Certified for use on combustible flooring.
Meets the thermal efficiency and standby loss requirements of the U.S. Department of
energy and current edition of ASHRAE/IESNA 90.1.
Options:
– Leg Kit for UL Sanitation to Meet NSF 5 – Kit #9003425205.
– Manifold Kits for Multiple Gas Heater Installations:
Dual Manifold Kit #9003426205
Triple Manifold Kit #3003427205
Quad Manifold Kit #3003428205
®
, contact:
®
– Complies with Texas requirements for low NOx emissions.
available on 200,000 thru 500,000 Btu sizes.
– Reduces heat loss over 2-1/2 times more effectively than
for easy access to tank interior on all models.
C O M M E R C I A L
– Blower is built into the top cover, factory
– Computer designed device
– Inlet and outlet connections are located
SCGSS00407 Revised March 2012
® SBN ™ stays