Advertisement
Quick Links
WARNING!
After connecting the device to a charger, a periodically blinking yellow diode in the base indicates lack of any programmed remote controls.
The image below shows the components needed to assemble the
whole system.
1) Stand V-line Back + V-line Back sensor
2) charging cable
3) cleaning tissue with izopropylan
4) USB 5V/2A power supply
5) smartphone
Optiguard sp. z o.o.
ul. Aleksandrowska 6-10, 87-100 Toruń
NIP 956-213-03-91
Phone +48 56 654 71 33
INSTALLATION INSTRUCTIONS
V-LINE BACK
SUGGESTED USE
V-line series is the Stand anti-theft protection dedicated to
smartphones and tablets.
The aesthetic product presentation is allowed by two types of
sensors: angled (25°) and flat.
An additional advantage is the possibility of rotation of the sensor by
90°, which allows convenient testing of the product.
Small size assured optimum visibility of the product.
Cleaning tissue with izopropylan assures the proper preparation
of the surface under Optiguard stickers.
1 / 5
Advertisement
Summary of Contents for Optiguard V-line Series
- Page 1 INSTALLATION INSTRUCTIONS V-LINE BACK SUGGESTED USE V-line series is the Stand anti-theft protection dedicated to smartphones and tablets. The aesthetic product presentation is allowed by two types of sensors: angled (25°) and flat. An additional advantage is the possibility of rotation of the sensor by 90°, which allows convenient testing of the product.
-
Page 2: Installation Instructions
Place the cable (with USB connector) in a special groove located Stick Stand to the furniture and press for approx. in the housing of Stand V-line. 10 seconds for good bonding of the sticker adhesive. Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń NIP 956-213-03-91 2 / 5... - Page 3 Stick the phone to the sensor and press for approx. 10 seconds The smartphone will be simultaneously charged and protected. for good bonding of the sticker adhesive. Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń NIP 956-213-03-91 3 / 5...
- Page 4 USB 5V/2A charger provides adequate power for Stand Plug the cable from Stand V-line with USB connector in the V-line and allows to charge the protected product. charger with USB port. Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń NIP 956-213-03-91 4 / 5...
- Page 5 LEDs in the sensor confirm Plug USB charger with connected Stand V-line into a power activation of the system. Finished! outlet (AC 230V). Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń NIP 956-213-03-91 5 / 5...