Photo - Samsung ML-6060 Technical Instructions

ML-6060/1650 Technical Instructions

Photo 30

Photo 31
Photo 32
Photo 33
Photo 34
Step 27
Remove the end cap from the hopper.
(See Photo 30)
Step 28
Slide the developer roller out from the side
of the cartridge.
(See Photo 31)
Step 29
Clean the developer roller using a dry lint
free cloth.
Step 30
Carefully clean the doctor blade using
Acetone and a cotton swab.
(See Photo 32)
Step 31
Slide the developer roller back into the
cartridge. Move the contact spring onto
the developer roller axle. (See Photo 33)
Step 32
Install the developer roller end plate onto
the cartridge. (See Photo 34)
NOTE: Make sure the end plate snaps into
place.
Notes
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com

7