Connecting To Hdmi-Compliant Devices Via Hdmi Out - ViewSonic SD-A160/SD-P20 User Manual

About Your SD-A160/SD-P20 Smart Display
3.2 Connecting to HDMI-compliant Devices via HDMI
Out
HDMI (High-Definition Multimedia Interface) is a compact audio/video
interface for transferring uncompressed digital audio/video data. You can
obtain the best user experience for video playback and gaming via HDMI.
SD-A160/SD-P20 is equipped with a HDMI out for connection to an external
HDMI-compliant device.
How to begin
1
A type A (HDMI) to type A (HDMI) HDMI cable must be available.
2
Connect the Type A connector of the HDMI cable to the desired HDMI
compliant device.
3
Connect the Type A connector of the HDMI cable to the HDMI-OUT
port located on the back of your SD-A160/SD-P20 .Tap the setting/
Display/dual-screen to turn on this function, you can run different
application on device and the conncted external display two screens. .
4
Always set the appropriate resolution. SD-A160/SD-P20 supports with
max. resolution of 1920*1080.
NOTE
• The switching of two display mode: To show different content on two screen,touch
screen of the left (right) side of 50 pixels region adn fast slide to the right (left),the focus
application on screen will only display on external display and the Smart Dispay device
an operate other application.
• Show same content on two screen: The is a simulaneous button on the status bar right
of the volume up icon),click on the button to make the two screens display the same
content.
8