CONCORD Proton Manual page 10

• Secure the two diagonal belts
relevant to the seat you have chosen
in their respective belt buckle so that
the belts lie evenly and closed on
the back seat bench.
• Place the baby carrier on the back
seat bench.
• Open the belt adaptor (11) by
pushing the safety catch to the side.
44
• Pull the diagonal lap belts out until
you can feed them from the bottom
upwards into the belt adaptors.
• Close the side safety catches on the
adaptors again.
• The diagonal belts now run from
above through the closed vehicle
belt buckles, then through the
closed belt adaptors (from bottom
to top) into the bracket on the
vehicle.
45