Airpura P600 Operating & Filter Replacement Directions

To open the filter chamber

Turn over Remove the 4 Take off
the Airpura retaining screws the cover
Unfold the filter slider Roll it
(Supplied with replacement into a spiral
filters or on request
Part#6F 001)
Insert the Let the canister
Carbon canister into slide down
the funnel and hold it thefilter slider
straight

To close the filter chamber

Replace Position the
the gasket indentation in the cover
into the center of the
HEPA filter
Remove Position the Place a felt gasket at
the gasket Prefilter inside the bottom of the
the filter
chamber
Insert the tube Let the spiral Open the top of the
into the filter open to fill spiral to make a
chamber inside the opening slight funnel
the Prefilter
Pull the filter slider up Remove the filter
out of the cavity using slider and fold it
both hands and let the for further use
canister slide to the
bottom of the cavity
Replace Turn the Airpura
the 4 screws back on casters
and tighten
filter chamber
Slide in the
Hepa filter
P600
OPERATING
&

FILTER REPLACEMENT

DIRECTIONS
Distributed by:
Pure n Natural Systems, Inc.
1-800-237-9199
www.purennatural.com