Advertisement
Quick Links
Advertisement
Related Manuals for Airpura R400
Summary of Contents for Airpura R400
- Page 1 R400 AIR PURIFIER USER MANUAL...
- Page 2 Congratulations on your purchase of the Airpura R400 air purifier. Please read this user manual carefully before operating to familiarize yourself with the unit and the proper usage of it. Keep this user manual ina safe place for future reference.
- Page 3 CONTENTS IMPORTANT SAFEGUARDS DIRECTIONS FOR USE TECHNICAL SPECS WARRANTY...
- Page 4 IMPORTANT SAFEGUARDS • Inspect the exterior of your Airpura to verify that there is no damage from shipping. • If any damage is noted, please follow the instructions from the distributor returns policy. • Wipe the unit with a damp cloth to remove any dust from packaging.
- Page 5 DIRECTIONS FOR USE You have taken the first step in creating a healthy environment. It should be noted that this purifier is not intended to be the main protection against pollutants. The source of your pollution should always be eliminated or reduced.
- Page 6 TECHNICAL SPECS Particle removal Size Over 40 sq ft true HEPA 15.5 in x 12 in (Measured only 1 side) with close ended metal caps. 10 pleats per inch. Warm Weight rolled with separators 23 lbs total (10.4 Kg) Activated carbon filter Watts * 8 lbs carbon filter 77 on high / 18 on low...
- Page 7 FILTER REPLACEMENT IN 400 UNIT 2. LAY THE UNIT UPSIDE DOWN ON A FLAT AND 1. UNPLUG THE UNIT CLEAN SURFACE 4. REMOVE THE 3. USING A SCREWDRIVER BOTTOM COVER REMOVE THE 4 SCREWS AND THE FOAM GASKET...
- Page 8 5. REMOVE THE REMOVE THE CARBON HEPA FILTER FILTER BYFIRMLY PULLING IT OUT. THE PREFILTER CAN BE ADHERED TO CARBON FILTER SO YOU HAVE TO PIVOT WITH BOTH HANDS IN ORDER TO RELEASE IT. REMOVE THE PREFILTER AND THE FILTER OVERCLOTH GENTLY AND PUT THEM IN A PLASTIC BAG.
- Page 9 INSTALLING FILTERS IN A 400 UNIT 2. INSTALL THE FOAM GASKET 1. INSTALL THE FILTER OVERCLOTH GENTLY TO THE BOTTOM OF AND THE PREFILTER IN THE UNIT. THE FILTER COMPARTMENT. MAKE SURE THE FILTER OVERCLOTH MAKE SURE THE GASKET SITS IS ON THE OUTSIDE TOWARDS THE FLAT TO THE BOTTOM.
- Page 10 6. INSTALL THE HEPA FILTER. MAKE 5. GENTLY PULL OUT SURE THE PREFILTER AND THE FILTER THE SLIDER USING OVERCLOTH ARE NOT COVERING THE BOTH HANDS BOTTOM BRACKETS. ADD THE UPPER GASKET AND THE BOTTOM COVER AND REPLACE AND REFASTEN THE 4 SCREWS...
- Page 11 If within two (2) years from the date of the Any shipment to Airpura Industries Inc. not original purchase by the end user from the accompanied with an RA number will not be...
Need help?
Do you have a question about the R400 and is the answer not in the manual?
Questions and answers