Service Mode; Test Mode - Pioneer VSX-1018AH-K Service Manual

1

6. SERVICE MODE

6.1 TEST MODE

[1] Version indication
A
[Purpose]
The versions for various microcomputers and DSP firmware are displayed.
[How to enter/exit]
During Standby mode, simultaneously press and hold the "STANDBY/ON" and "MULTI CH IN" keys for 5 seconds
to enter this mode.
This mode is automatically exited when the indications of all versions have finished.
B
[Basic operations]
FL Display
POWER OFF
M0.501 E0.501
H0.503
C
f0.515
LX51/HY
Normal display
[Notes]
D
1. If the version indication becomes "**," a failure in communications between the corresponding microcomputers or
a failure in the corresponding microcomputers is likely.
2. In this submode, the user settings will not be cleared.
E
F
64
1
2
Description of Version
Indications
Mx.xxx : Main microcomputer
Ex.xxx : EVENT microcomputer
Hx.xxx : HDMI microcomputer
fx.xxx : DSP Firm version
2
3
Duration Devices that can be considered generally
(sec.) normal, with the corresponding indications
5 Main microcomputer and EVENT microcomputer
5 HDMI microcomputer
5 DSP firmware
5 model/destination
VSX-LX51
3
4
4