Certification; Conformance And Related Standards; Atex Standards - Pentair Goyen Mecair FFD Installation And Operation Manual

2 CERTIFICATION

CONFORMANCE AND RELATED STANDARDS

Goyen | Mecair hereby declares that this instrument—within the limits specified in this manual—complies with the essential
requirements and other provisions of the pursuant European Union Directives: Low Voltage Directive, EMC Directive, and ATEX
Directive.
For details refer to the Declaration of Conformance for this instrument or system (available on request from Goyen | Mecair or
our local representative).

ATEX Standards

In addition, the instrument has been designed to be compliant with the below standards.
EN 60079-0:2012 + A11:2013
Explosive atmospheres. Part 0: Equipment –
General requirements
EN 60079-15:2010
Explosive atmospheres.
Part 15: Equipment protection by type of
protection "n"
EN 60079-31:2009 AND EN 60079-31:2014
Explosive atmospheres –
Part 31. Equipment dust ignition protection
by enclosure "t"
INSTALLATION AND OPERATION MANUAL – OWNER'S RECORD FFD MANUAL – FILTER FAILURE DETECTOR
Specifies the general requirements for the construction, testing and marking of electrical
equipment used in explosive atmospheres.
Specifies requirements for the construction, testing and marking for Group II electrical
equipment with type of protection, "n" intended for use in explosive gas atmospheres.
This standard should be read in conjunction with EN 60079-0.
Specifies requirements for design, construction and testing of electrical equipment and Ex
components.
03