Related Manuals for Siegenia Drive Series
Summary of Contents for Siegenia Drive Series
- Page 1 INSTALLATION AND OPERATING INSTRUCTIONS DRIVE MSA400 smart Motorised Sliding System. Window systems Door systems Comfort systems...
-
Page 2: Table Of Contents
MSA400 smart Installation and operating instructions Contents 1. General information ................................... 3 2. Safety notes ....................................4 3. Device functions ..................................5 4. Size range ....................................7 5. Scope of delivery ..................................7 6. On-site risk and hazard analysis ..............................8 7. -
Page 3: General Information
• Any use of this product that is not in accordance with its correct use, or any adaptation of or modification to the product and its associated components for which the express consent of SIEGENIA has not been obtained, is strictly prohibited. SIEGENIA accepts no liability whatsoever for any material losses or injury to people caused by failure to comply with this stipulation. -
Page 4: Safety Notes
• Should a solid object or any liquid get inside the unit, stop operation immediately and disconnect the MSA400 smart system from the mains. Then have the MSA400 smart system checked and repaired by qualified specialists only. • If the network connection cable is damaged, it may only be replaced by SIEGENIA, its customer service department or an electrician. -
Page 5: Device Functions
• The MSA400 smart is a motorised sliding system for the automatic movement of sliding elements • The MSA400 smart can be controlled by a tablet or smartphone and offers additional device functions via the SIEGENIA Comfort app. Please follow the enclosed quick start instructions (H47.MOTS005EN). - Page 6 MSA400 smart Installation and operating instructions 3.3 Information on safety cut-off and jam protection General information on safety cut-off As soon as the slide path of a sliding sash becomes blocked (e.g. due to an obstacle or because it is stuck), it stops, moves for approx.
-
Page 7: Size Range
Installation and operating instructions MSA400 smart 4. Size range The MSA400 smart system is installed horizontally on the inside top of the sliding element frame. Traverse path 8,000 mm Displacement force 50 N Displacement force with light curtain installed 90 N Max. -
Page 8: On-Site Risk And Hazard Analysis
6.3 Cooperation between trades and interfaces In the context of project management, the work of the various trades must be carefully coordinated. If SIEGENIA components are being connected to third-party installations or SIEGENIA products are being combined with parts by other manufacturers (e.g. -
Page 9: Installation
General information about installation • The following description of the assembly process is a recommendation from SIEGENIA and describes the major steps involved. The specific details of the assembly process are determined, amongst other factors, by the sliding element used, by the production process and by the window manufacturer's equipment and facilities. - Page 10 MSA400 smart Installation and operating instructions 7.3 Information about mains cable running Important information for safety and assembly The fitting of the mains cable is determined by the prevailing conditions on site. There are two assembly options: Assembly option 1 – surface-mounted mains cable running The MSA400 smart system is delivered as standard with a mains cable.
- Page 11 Installation and operating instructions MSA400 smart Assembly option 2 – concealed mains cable running The customer-side concealed routing of the mains cable for the slide drive SA and the connection of the slide drive SA, this work must be carried out by a qualified electrician. In the case of mains cable running for sliding elements which have not yet been installed (e.g.
- Page 12 Important: In order for the catch to be positioned correctly on the sliding sash, the set dimension X (Fig. 2) must be used. The correct set dimension X for the respective profile systems is listed in the installation steps for the installation of the MSA400 smart, available from our download portal: downloads.siegenia.com/de/00007/index.html 05.2017...
- Page 13 Installation and operating instructions MSA400 smart 7.5 Assembly of the slide drive SA 7.5.1 Horizontal positioning of the slide drive SA When measuring the RIB (inside frame width), take into account whether the frame profile is being used with or without a cover.
- Page 14 Two screw levels (A or B) are provided to fix the slide drive SA to the top of the frame profile. You will find specific steps for installation of the MSA400 smart on our download portal: downloads.siegenia.com/de/00007/index.html 1. Fixing the slide drive SA to the mounting angle at screw level A or B.
- Page 15 Installation and operating instructions MSA400 smart 7.6 Concealed mains cable running and connection 7.6.1 Concealed routing and connection to the power supply for slide drive SA Important note: If the customer is responsible for routing the flexible mains cable (5 x 1.5 mm ) for the slide drive SA and the connection in the power supply of the slide drive SA, this work must be carried out by a qualified electrician.
- Page 16 MSA400 smart Installation and operating instructions 7.6.2 Surface-mounted mains cable running The MSA400 smart system is delivered with a 5 m long mains cable as standard. The cable outlet is always located on the locking side at the top of the MSA400 smart system. A suitable mains socket must be located near the cable outlet. It is recommended to route the mains cable through an appropriate installation duct.
- Page 17 Installation and operating instructions MSA400 smart 7.7 Installing the light curtain Alterations must be made to the MSA400 smart in order to operate it with a light curtain The suitable light curtain can be ordered from: Light curtain CEDES GmbH Elektronische Systeme Elzmatten 6 D-79365 Reinhausen...
-
Page 18: Commissioning
MSA400 smart Installation and operating instructions 8. Commissioning 8.1 General information for commissioning • Following installation of the MSA400 smart (initial commissioning), you must carry out a reference run as well as a calibration and teach-in run. • The reference run, as well as the calibration and teach-in run help to determine the size of the slide element and the displacement force. - Page 19 Installation and operating instructions MSA400 smart 8.3 Calibration and teach-in run Risk of injury! Hands, arms, legs and feet can get trapped and/or crushed! There is no safety cut-off function! › During the entire calibration and teach-in run, maintain a safe distance from the moving elements. Risk due to incorrect measured values! ›...
-
Page 20: Operation
MSA400 smart Installation and operating instructions 9. Operation 9.1 Opening the sliding sash › When the sliding sash is closed and locked, press the operator push button once. › The sliding sash is unlocked and opens; the LED lights up green. 9.2 Stopping the sliding sash during travel –... - Page 21 Installation and operating instructions MSA400 smart 9.4 Closing and locking the sliding sash (optional, only with supplementary locking motor) Note: This function must be programmed on the MSA400 smart system before it is carried out – see “Teach in close function without locking”...
-
Page 22: Programming Special Functions
MSA400 smart Installation and operating instructions 10. Programming special functions 10.1 Teaching-in the intermediate position 1. Close sliding sash completely (CLOSED position). 2. Press the Prog button; the LED flashes green. 3. Press and hold the operating push button for approx. 8 seconds until a short acoustic signal sounds 3 times in succession. 4. -
Page 23: Care And Maintenance
Installation and operating instructions MSA400 smart 12. Care and maintenance Electrically operated unit. Risk of fatal injury from electric shock or fire. To prevent personal injury or damage to property, always comply with the following instructions: › Pull the mains plug out of the socket prior to every cleaning process or maintenance work. Never pull at the cable to disconnect the device from the electricity grid. -
Page 24: Rectification Of Malfunctions
In case of a malfunction, do not open the device or try to repair it under any circumstances. If the problem is not listed in the table below, please contact your window specialist or SIEGENIA directly: Tel. +49 271 3931-0 13.1 MSA400 smart... -
Page 25: Technical Specifications
Installation and operating instructions MSA400 smart 14. Technical specifications Specification for a MSA400 smart Supply voltage 120–230 V∼, 22 W Device operating voltage 24 V DC (power supply integrated in the slide drive) Max. displacement force during slide operation Approx. 50 N (depending on sash weight and friction) Traverse speed Approx. -
Page 26: Information Concerning Product Liability
16.4 Environmental protection Although our products do not fall within the scope of the German Electrical and Electronic Equipment Act, SIEGENIA will continue to meet the requirements of this Act and will endeavour to completely eliminate the use of substances that are hazardous to the environment as soon as this becomes technically feasible. -
Page 27: Ec Declaration Of Incorporation
Installation and operating instructions MSA400 smart 18. EC declaration of incorporation Manufacturer SIEGENIA-AUBI KG Hardware and ventilation technology Duisburger Straße 8 57234 Wilnsdorf declares that the product: Slide drive Device type MSA400 smart Type designation meets the following fundamental requirements:... - Page 28 Phone: + Industriestraße Telefax: + Wilnsdorf info@sie enia.com GERMANY www.sie enia.com Hun ary Phone: + SIEGENIA worldwide: Austria Phone: + Italy Phone: + Belarus Phone: + Poland Phone: + Benelux Phone: + Russia Phone: + China Phone: + South Korea Phone: +...
Need help?
Do you have a question about the Drive Series and is the answer not in the manual?
Questions and answers