7-5.
Interface Connections
For interface connections, refer to the instructions for interface of the host
computer. The following gives basic examples.
Figure 7-4. Interface Connections using Modular/D-Sub 25 Adapter to IBM PC
Before selecting interface cable wiring, it is necessary to know the wiring of the
modular interconnect cable. Figure 7-5. below shows the way to determine if the
cable is straight connected, or cross connected. Cross connected wiring is not
suitable for shielded cable.
(Use with straight through cable wiring)
Figure 7-5.
– 25 –
M
TYPE
ONLY