Advertisement
Quick Links
CXE2000/CXE3000 CompletePBX: Getting Started Guide
Package Contents
CXE2000/CXE3000 (2U 19'' width
unit)
Power cord
Prerequisites
You need a computer equipped with an Internet browser. Firefox is recommended.
Step 1: Earthing the Unit
1) For safety and performance reasons, it is essential to ground the unit.
Note: Not properly grounding this device will void your warranty!
2) Use a star washer to securely connect a grounding tab to the grounding screw on the rear
panel.
3) Using 12-16 gauge wire, connect the grounding tab to a reliable ground.
4) All Xorcom hardware should be connected to a common grounding point.
Grounding
Power Supply
Figure 1: Detail of CXE2000 Rear Panel
Grounding
Power Supply
Figure 2: Detail of CXE3000 Rear Panel
Step 2: Powering Up the Unit
1. Connect a keyboard and a VGA/SVGA screen.
2. Connect the unit to the LAN.
3. Connect the power cord to the power input socket on the rear panel.
4. Turn on the power using the power button on the front panel.
5. The startup process takes about 2 minutes. The startup time depends on the number of
telephony ports installed in your CXE2000/CXE3000 unit.
PM0617.08 - CXE2000/CXE3000 CompletePBX Getting Started Guide (electronic version)
8 Katom St., Misgav Industrial Park, 2017400, Israel
Tel: +972-4-9951999; Fax: +972-4-9990287
Support hardware for 19'' cabinet
CompletePBX 5 software preinstalled
on the hardware
IPMI
nic0
nic1
nic1
nic0
Page 1 of 7
Advertisement
Related Manuals for Xorcom CXE2000
Summary of Contents for Xorcom CXE2000
-
Page 1: Package Contents
2) Use a star washer to securely connect a grounding tab to the grounding screw on the rear panel. 3) Using 12-16 gauge wire, connect the grounding tab to a reliable ground. 4) All Xorcom hardware should be connected to a common grounding point. Grounding nic0... - Page 2 Method 1: Using the LCD Panel a. How to obtain IP address(es) received from DHCP server The CXE2000/CXE3000 will try to obtain the IP address from your DHCP server, if one is available. To check the received IP address by using the LCD panel: Press the “Menu”...
- Page 3 In this example the CXE2000/CXE3000 nic0 interface received IP address 192.168.0.64. The nic1 interface did not receive an IP address. b. How to configure a static IP address(es) Replace 1.2.3.4/24 and 1.2.3.1 with the required IP address (in CIDR format) and default...
- Page 4 3001. In order to configure the device follow these steps: a) From a computer’s Internet browser enter the CXE2000/CXE3000 IP address (for example http://192.168.0.64). b) You will be prompted to define a password for “administrator”. Once you define a password you will be able to connect to the web interface as user admin with password that you defined.
- Page 5 2. The Phone indicator is replaced with H/W LED, indicating hardware failure (when on). Port Status LED (Light Emitting Diode) Indicators The CXE2000/CXE3000 has a single green LED status indicator for analog ports (Fig. 4). The Red LEDs are NOT USED for line status indication), and there are two LED indicators for digital ports.
- Page 6 3. Switch on the server and press the Enter button on the LCD keypad until the "Loading from internal flash..." message appears on the LCD. 4. The Xorcom Rapid Recovery menu will be displayed on the monitor. Additional LCD Panel Functions Status •...
- Page 7 Scan the QR code on the front panel of the IP-PBX for easy access to all relevant product info for this specific product, including detailed technical documentation, “how to” videos, and more. Page 7 of 7 PM0617.08 - CXE2000/CXE3000 CompletePBX Getting Started Guide (electronic version)