1. Manuals
  2. Brands
  3. Climax Manuals
  4. Tools
  5. H&S BOILER GUN BG22
  6. Operating manual

Climax H&S BOILER GUN BG22 Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BOILER
GUN
BG22 BOILER GUN
OPERATING MANUAL
P/N 100241
August 2017
Revision 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H&S BOILER GUN BG22 and is the answer not in the manual?

Questions and answers

Related Manuals for Climax H&S BOILER GUN BG22

Summary of Contents for Climax H&S BOILER GUN BG22

  • Page 1 BOILER BG22 BOILER GUN OPERATING MANUAL P/N 100241 August 2017 Revision 1...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS HAPTER ECTION INTRODUCTION 1 ............1 OW TO USE THIS MANUAL .
  • Page 4 TABLE OF CONTENTS (CONTINUED) HAPTER ECTION 4.2.2 Electric motor ............. 20 MAINTENANCE 21 .
  • Page 5 LIST OF FIGURES IGURE 1-1 BG22 Boiler Gun, pneumatic label location..........7 1-2 BG22 Boiler Gun, electric label location .
  • Page 6 This page intentionally left blank Page iv...
  • Page 7 LIST OF TABLES ABLE 1-1 Sound levels ..............3 1-2 Risk assessment checklist before set-up .
  • Page 8 This page intentionally left blank Page vi...
  • Page 9 Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded, or stored in any storage medium, without the express prior written consent of Climax. Climax hereby grants permission to download a single copy of this manual and of any revision hereto onto an electronic storage...
  • Page 10 CLIMAX GLOBAL LOCATIONS Page B...
  • Page 11 CE DOCUMENTATION CE Certification is pending P/N 100241, Rev. 1 Page C...
  • Page 12 Climax will, at its option, either repair or replace the defective machine at no charge and will return the machine with shipping prepaid.

  • Page 13: Introduction

    INTRODUCTION IN THIS CHAPTER: 1.1 H - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 OW TO USE THIS MANUAL 1.2 S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1...

  • Page 14: General Safety Precautions

    ENERAL SAFETY PRECAUTIONS H&S leads the way in promoting the safe use of portable cause severe impact, pinching, cutting, and machine tools. Safety is a joint effort. You, the end other injuries. Except for stationary operating user, must do your part by being aware of your work controls, avoid contact with moving parts by environment and closely following the operating proce- hands or tools during machine operation.

  • Page 15: Achine Specific Safety Precautions

    ACHINE SPECIFIC SAFETY PRECAUTIONS Eye hazard – This machine produces metal chips Sound level – This machine produces potentially during operation. Always wear eye protection harmful sound levels. Hearing protection is required when operating the machine. when operating this machine or working around it. During testing, the machine produced the sound Hazardous environments –...

  • Page 16: Risk Assessment And Hazard Mitigation

    ISK ASSESSMENT AND HAZARD MITIGATION Machine Tools are specifically designed to perform pre- To achieve the intended results and to promote safety, cise material-removal operations. the operator must understand and follow the design intent, set-up, and operation practices that are unique Stationary Machine Tools include lathes and milling to Portable Machine Tools valve testers.

  • Page 17: Risk Assessment Checklist

    ISK ASSESSMENT CHECKLIST The following checklist is not intended to be an all However, these checklists are typical of the types of inclusive list of things to watch out for when setting up risks the assembler and operator should consider. Use and operating this Portable Machine Tool.

  • Page 18: Labels

    ABELS 1.7.1 Label identification The following warning labels should be on your machine. If any are defaced or missing, contact H&S Tool immediately for replacements. 1-4. BG22 B ABLE OILER UN LABELS P/N 100204 P/N 100199 BG22 Boiler gun label H&S company label P/N 87271 Warning label: Use...

  • Page 19: Label Location

    1.7.2 Label location The following figures display the location of the labels on each of the components of the BG22 Boiler Gun. 1-1. BG22 B IGURE OILER PNEUMATIC LABEL LOCATION Label P/N: 100204, 100198, 100199, 87271 P/N 100241, Rev. 1 Page 7...

  • Page 20: Bg22 Boiler Gun, Electric Label Location

    1-2. BG22 B IGURE OILER ELECTRIC LABEL LOCATION Label P/N: 100204, 100198, 100199, 87271 Page 8 BG22 Boiler Gun Operating Manual...

  • Page 21: Overview

    OVERVIEW IN THIS CHAPTER: 2.1 F - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 EATURES AND COMPONENTS 2.2 C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10...

  • Page 22: Controls

    ONTROLS 2.2.2 Electric motor controls Depending on the user’s requirements, the BG22 Boiler Gun can be powered by either a pneumatic or electric The electric motor controls are similar to a drill or drill motor. The controls for each type of motor follow. driver.

  • Page 23: Dimensions

    WARNING Do not take any measures to lock the throttle or the trigger in the on position. Failure to follow this safety precaution may result in severe injury. 2-4. C IGURE ORDLESS MOTOR CONTROLS IMENSIONS Figure 2-5 shows the machine and operating dimen- sions.

  • Page 24: Specifications

    PECIFICATIONS 2-1. S ABLE COMPONENT MASS Component Mass in lbs (kg) BG22 BG22 Boiler Gun Pneumatic 14 (6.4) BG22E BG22 Boiler Gun Electric 11 (5) BG22C BG22 Boiler Gun Cordless Electric 16 (7.3) TEMS REQUIRED BUT NOT SUPPLIED The following items may be required but not supplied in •...

  • Page 25: Setup

    SETUP IN THIS CHAPTER: 3.1 R - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13 ECEIPT AND INSPECTION 3.2 M - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -14...

  • Page 26: Machine Setup

    ACHINE ETUP 3-1. BG22 B IGURE OILER UN MAIN COMPONENTS Do the following to setup the BG22 Boiler Gun: 8. If installing wedge extensions, secure three of the same size range onto the base wedges with 3.2.1 Wedge locking system the screws.

  • Page 27: Collet Locking System

    3. Install three of the same size wedges in the 7. If not present, install the locking rod wrench slots of the center shaft with the thinner end and secure with the retaining clips. facing the threaded portion of the center shaft and the recess for the band spring facing out.

  • Page 28: Machine Mounting

    1. Position the machine on a solid support to 9. Reinstall the retaining plate and secure with the change the center shafts. two screws. 2. Remove the locking rod, rod wrench and wedge or collet locking sets. 3. Remove the two screws in the retaining plate and the lift the retaining plate from the machine body.

  • Page 29: Installing The Cutting Tools

    WARNING Check that the mounting system has been fully tightened. After the machine has made 2-3 revolutions during operation, recheck the mounting system for tightness in the workpiece. If loose, the machine itself could rotate causing severe injury to the operator.

  • Page 30: Motors

    OTORS 3.5.2 Electric motor The BG22 Boiler Gun is powered by either a pneumatic motor or an electric motor. The following subsections Do the following to prepare the electric motor for use explain how to set up each for operation. (See Section 2.2 for controls): 3.5.1 Pneumatic motor...

  • Page 31: Operation

    OPERATION IN THIS CHAPTER: 4.1 P - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19 OPERATION CHECKS 4.2 O - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19...

  • Page 32: Electric Motor

    a) Turn off the air supply at the source. Dis- Release the trigger to stop the machine. connect the air hose assembly from the machine. b) Turn the locking wrench to loosen the locking system from the workpiece. c) Slide the BG22 straight out from the workpiece using the body of the machine to support it’s weight.

  • Page 33: Maintenance

    MAINTENANCE IN THIS CHAPTER: 5.1 M - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21 AINTENANCE CHECKLIST 5.2 A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21...

  • Page 34: Maintenance Tasks

    CAUTION Avoid damage, premature machine wear, and protect your warranty by using only approved lubricants. 5-2. A ABLE PPROVED LUBRICANTS Biodegradable Lubri- Application Area Lubricant Viscosity (cSt) Quantity Frequency cant Light coating Threads of the cen- WD-40 or light- Daily during machine applied by ter shaft weight spray lube...

  • Page 35: Tool Holders

    5.3.4 Tool holders 2. Set the oiler valve to ‘3’ as a baseline for the flow rate. Do the following to service the tool holders: 3. Replace the cap. 1. Monitor and replace as necessary, the o-rings on 4. Mount and setup the machine (see Section 3.2- the I.D.
  • Page 36 This page intentionally left blank Page 24 BG22 Boiler Gun Operating Manual...

  • Page 37: Storage And Shipping

    STORAGE AND SHIPPING IN THIS CHAPTER: 6.1 S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -25 TORAGE 6.1.1 S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -25...

  • Page 38: Shipping

    HIPPING The BG22 Boiler Gun can be reshipped in its original shipping container, as shown in Figure 6-1. 6-1. BG22 IGURE SHIPPING CONTAINER ECOMMISSIONING To decommission the BG22 Boiler Gun prior to disposal, remove the drive motor and dispose of it separately from the rest of the machine components.

  • Page 39: Assembly Drawings

    APPENDIX A ASSEMBLY DRAWINGS Drawing list A-1. BG22 (P/N BG22) - - - - - - - - - - - - - - - - - - - - -28 IGURE BOILER GUN PNEUMATIC ASSEMBLY A-2. BG22 (P/N BG22E) - - - - - - - - - - - - - - - - - - - - -29 IGURE BOILER GUN ELECTRIC ASSEMBLY A-3.

  • Page 40: Bg22 Boiler Gun Pneumatic Assembly (P/N Bg22)

    SOCKET HEAD CAP SCREW SOCKET HEAD CAP SCREW 5001078 10-24 X 3/8" CENTER SHAFT LOCK TI007822 SPRING WASHER B002519 DROP SWIVEL MAIN GEAR TI007821 95462 1/2" NPT HALF ROUND KEY HALF-ROUND KEY MALE PLUG MALE PLUG 9150005 DCP2504 3/16 X 1/2" 1/2"...

  • Page 41: Bg22 Boiler Gun Electric Assembly (P/N Bg22E)

    CENTER SHAFT LOCK TI007822 MAIN GEAR TI007821 ELECTRIC MOTOR EB002615 KEYSTOCK 9110005 SOCKET HEAD CAP SCREW 5001074 NEEDLE BEARING 9150005 ELECTRIC MOTOR ADAPTER 100272 BRONZE THRUST BEARING TI007818 ROD WRENCH RETAINER RING 9211001 NEEDLE BEARING NEEDLE BEARING 001816 001816 ROD WRENCH ROD WRENCH 23081119900 23081119900...

  • Page 42: Bg22 Boiler Gun Cordless Electric Assembly (P/N Bg22C)

    A-3. BG22 (P/N BG22C) IGURE BOILER GUN CORDLESS ELECTRIC ASSEMBLY Page 30...

  • Page 43: Collet Components And Collets

    COLLET LOCKING ROD B002550 RETAINING CLIP 9211001 COTTER PIN 9231001 COLLET CENTER SHAFT B002540 PART ITEM NO. QTY. PART NAME NUMBER COLLET 1-3/8" BC1-38 COLLET 2-7/8" BC2-78 COLLET 1-5/16 BC1-516 COLLET 2-3/4" BC2-34 COLLET 1-1/4" BC1-14 COLLET 2-5/8" BC2-58 COLLET 1-3/16" BC1-316 COLLET 2-1/2"...

  • Page 44: Wedge Sets And Wedge Extensions

    WEDGE SET B-10 (1.750-1.935") 100225 WEDGE EXTENSION SPRING 100246 WEDGE SET B-09 (1.625-1.810") 100224 WEDGE GUIDE (B-06 - B-14) 100214 WEDGE SET B-08 (1.500-1.685") 100223 WEDGE BAND SPRING 100245 WEDGE SET B-07 (1.375-1.560") 100222 WEDGE GUIDE (B-01 - B-05) 100213 8-32 X 5/16"...

  • Page 45: Igure Age

    LOCKING WRENCH 23081119900 SPRING PIN 9231001 SPEED WHEEL 100211 WEDGE CENTER SHAFT 100215 WEDGE EXPANSION ROD TI007850 RETAINING CLIP 9211001 PART PART ITEM NO. QTY. PART NAME ITEM NO. QTY. PART NAME NUMBER NUMBER A-6. W IGURE EDGE SET COMPONENTS P/N 100241, Rev.

  • Page 46: Small Wedge Set Components

    O-RING TI007815 SPRING BAND 100245 DIFFERENTIAL SCREW 9150006 BB WEDGE TI007871 BLADE LOCK TI007813 AA WEDGE TI007870 ROD WRENCH RETAINER RING 9211001 NEEDLE BEARING 9150007 EXPANSION ROD TI007851 SET SCREW 1816 CENTER SHAFT TI007850 1.6" TOOL HOLDER 9210216 PART PART ITEM NO.

  • Page 47: Air Motor Assembly And Parts List (P/N Cml3488)

    A-9. A (P/N CML3488) IGURE IR MOTOR ASSEMBLY AND PARTS LIST P/N 100241, Rev. 1 Page 35...

  • Page 48: Air Hose Assembly And Parts List (P/N Hs 50-509)

    FILTER ASSEMBLY HS50-507 1/2" NIPPLE HS50-517 SAFETY CLIP HS50-526 CAP O-RING HS50-516 RUBBER WASHER HS50-525 HS50-515 UNIVERSAL COUPLER HS50-524 VALVE O-RING HS50-514 NUT O-RING HS50-523 OILER VALVE HS50-513 FILTER NUT HS50-522 LUBRICATOR BODY HS50-512 ELEMENT O-RING HS50-521 LUBRICATOR ASSEMBLY HS50-505 FILTER ELEMENT HS50-520 QUICK DISCONNECT COUPLER...

  • Page 49: Electric Motor Assembly And Parts List (P/N Eb002615)

    A-11. E (P/N EB002615) IGURE LECTRIC MOTOR ASSEMBLY AND PARTS LIST P/N 100241, Rev. 1 Page 37...

  • Page 50: Tool Kit

    RETAINING CLIP PLIERS SNAP FOLD UP KEY SET 5/64-1/4" 100093 1/8" HEX KEY, LONG ARM ODWR (SLIDING TOOL HOLDER ONLY) 5/32" HEX KEY, LONG ARM 05471107 05471107 (FIXED TOOL HOLDER ONLY) PART ITEM NO. PART NAME NUMBER A-12. T IGURE OOL KIT FOAM INSERT, MAIN WITH CUTOUTS 100092...
  • Page 51 APPENDIX B SDS list ExxonMobil Mobil Almo 525 ... . . 59 Nook PAG-1 Grease ....68 LPS 1 .
  • Page 52 This page intentionally left blank Page 40...
  • Page 53 SAFETY DATA SHEET 1. Identification Product identifier LPS® 1 (Aerosol) Other means of identification 00116 Part Number An industrial lubricant designed to displace moisture from mechanical and electrical equipment, Recommended use provide light-duty lubrication and short-term rust prevention. None known. Recommended restrictions Manufacturer/Importer/Supplier/Distributor information Manufacturer...
  • Page 54 3. Composition/information on ingredients Mixtures Chemical name Common name and synonyms CAS number Distillates Petroleum, Hydroteated 64742-47-8 70 - 80 Light Distillates Petroleum Hydrotreated 64742-46-7 10 - 20 Carbon Dioxide 124-38-9 1 - 5 Sorbitan trioleate 26266-58-0 1 - 3 Calcium Sulfonate 61789-86-4 0.1 - 1...
  • Page 55 Refer to attached safety data sheets and/or instructions for use. Eliminate all ignition sources (no Methods and materials for smoking, flares, sparks, or flames in immediate area). Keep combustibles (wood, paper, oil, etc.) containment and cleaning up away from spilled material. Stop leak if you can do so without risk. Move the cylinder to a safe and open area if the leak is irreparable.
  • Page 56 Individual protection measures, such as personal protective equipment Wear safety glasses with side shields (or goggles). Eye/face protection Skin protection Chemical resistant gloves are recommended. Hand protection Avoid contact with the skin. Wear appropriate chemical resistant clothing. Other When workers are facing concentrations above the exposure limit they must use appropriate Respiratory protection certified respirators.
  • Page 57 Hazardous polymerization does not occur. Possibility of hazardous reactions Avoid heat, sparks, open flames and other ignition sources. Avoid temperatures exceeding the Conditions to avoid flash point. Contact with incompatible materials. Oxidizing agents. Incompatible materials Carbon oxides. Hazardous decomposition products 11.
  • Page 58 Respiratory or skin sensitization Not a respiratory sensitizer. Respiratory sensitization May cause an allergic skin reaction. Skin sensitization No data available to indicate product or any components present at greater than 0.1% are Germ cell mutagenicity mutagenic or genotoxic. This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. Carcinogenicity OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed.
  • Page 59 None Packaging non bulk None Packaging bulk IATA UN1950 UN number Aerosols, flammable UN proper shipping name Transport hazard class(es) Class Subsidiary risk Not applicable. Packing group Environmental hazards ERG Code Read safety instructions, SDS and emergency procedures before handling. Special precautions for user Other information Allowed.
  • Page 60 CERCLA Hazardous Substance List (40 CFR 302.4) Not listed. SARA 304 Emergency release notification Not regulated. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed. Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - Yes Hazard categories Delayed Hazard - No Fire Hazard - Yes Pressure Hazard - Yes Reactivity Hazard - No...
  • Page 61 Country(s) or region Inventory name On inventory (yes/no)* United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s).
  • Page 62 SAFETY DATA SHEET 1. Identification Product identifier LPS® 2 (Aerosol) Other means of identification 00216 Part Number An industrial lubricant designed to displace moisture from equipment, provide heavy-duty Recommended use lubrication and rust prevention. None known. Recommended restrictions Manufacturer/Importer/Supplier/Distributor information Manufacturer Manufacturer LPS Laboratories, a division of Illinois Tool Works, Inc.
  • Page 63 Supplemental information None. 3. Composition/information on ingredients Mixtures Chemical name Common name and synonyms CAS number Distillates Petroleum, Hydroteated 64742-47-8 70 - 80 Light Petroleum Oil 64742-52-5 10 - 20 Carbon Dioxide 124-38-9 1 - 5 4. First-aid measures Remove victim to fresh air and keep at rest in a position comfortable for breathing. For breathing Inhalation difficulties, oxygen may be necessary.
  • Page 64 7. Handling and storage Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missing Precautions for safe handling or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke while using or until sprayed surface is thoroughly dry.
  • Page 65 Skin protection Chemical resistant gloves are recommended. Hand protection Wear suitable protective clothing. Other In case of insufficient ventilation, wear suitable respiratory equipment. Respiratory protection Not applicable. Thermal hazards When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such General hygiene as washing after handling the material and before eating, drinking, and/or smoking.
  • Page 66 Strong oxidizing agents. Incompatible materials Carbon oxides. Hazardous decomposition products 11. Toxicological information Information on likely routes of exposure Vapors have a narcotic effect and may cause headache, fatigue, dizziness and nausea. Inhalation Causes skin irritation. Skin contact Causes serious eye irritation. Eye contact May cause discomfort if swallowed.
  • Page 67 Based on available data, the classification criteria are not met. Specific target organ toxicity - repeated exposure Not likely, due to the form of the product. Aspiration hazard Prolonged inhalation may be harmful. Chronic effects 12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude the Ecotoxicity possibility that large or frequent spills can have a harmful or damaging effect on the environment.
  • Page 68 Read safety instructions, SDS and emergency procedures before handling. Read safety Special precautions for user instructions, SDS and emergency procedures before handling. Other information Allowed. Passenger and cargo aircraft Allowed. Cargo aircraft only IMDG UN1950 UN number AEROSOLS, flammable UN proper shipping name Transport hazard class(es) Class Subsidiary risk...
  • Page 69 Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - Yes Hazard categories Delayed Hazard - No Fire Hazard - Yes Pressure Hazard - Yes Reactivity Hazard - No SARA 302 Extremely hazardous substance Not listed. SARA 311/312 Hazardous chemical SARA 313 (TRI reporting) Not regulated.
  • Page 70 The information provided in this Safety Data Sheet is correct to the best of our knowledge, Disclaimer information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification.
  • Page 71 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 1 of 9 ______________________________________________________________________________________________________________________ MATERIAL SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT Product Name: MOBIL ALMO 525 Product Description: Base Oil and Additives Product Code: 603183-00, 970924 Intended Use: Lubricant COMPANY IDENTIFICATION Supplier:...
  • Page 72 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 2 of 9 ______________________________________________________________________________________________________________________ adequate respiratory protection. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.
  • Page 73 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 3 of 9 ______________________________________________________________________________________________________________________ creeks. The National Response Center can be reached at (800)424-8802. SPILL MANAGEMENT Land Spill: Stop leak if you can do it without risk. Recover by pumping or with suitable absorbent. Water Spill: Stop leak if you can do it without risk.
  • Page 74 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 4 of 9 ______________________________________________________________________________________________________________________ with this material, as provided below, is based upon intended, normal usage. Respiratory Protection: If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable.
  • Page 75 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 5 of 9 ______________________________________________________________________________________________________________________ Vapor Pressure: < 0.013 kPa (0.1 mm Hg) at 20 C Evaporation Rate (n-butyl acetate = 1): Log Pow (n-Octanol/Water Partition Coefficient): > 3.5 Solubility in Water: Negligible Viscosity: 46 cSt (46 mm2/sec ) at 40 C | 7.3 cSt (7.3 mm2/sec) at 100C...
  • Page 76 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 6 of 9 ______________________________________________________________________________________________________________________ Oil Mist (highly refined oils): Animals exposed to high concentrations of mist developed oil retention, inflammation, and oil granulomas in the respiratory tract. Oils exposed to high temperatures, cracking conditions, or mixing with tramp / used oils may introduce polycyclic aromatic compounds or microbial contaminants that could result in cancer or severe respiratory hazards.
  • Page 77 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 7 of 9 ______________________________________________________________________________________________________________________ REGULATORY DISPOSAL INFORMATION RCRA Information: The unused product, in our opinion, is not specifically listed by the EPA as a hazardous waste (40 CFR, Part 261D), nor is it formulated to contain materials which are listed as hazardous wastes. It does not exhibit the hazardous characteristics of ignitability, corrositivity or reactivity and is not formulated with contaminants as determined by the Toxicity Characteristic Leaching Procedure (TCLP).
  • Page 78 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 8 of 9 ______________________________________________________________________________________________________________________ --REGULATORY LISTS SEARCHED-- 1 = ACGIH ALL 6 = TSCA 5a2 11 = CA P65 REPRO 16 = MN RTK 2 = ACGIH A1 7 = TSCA 5e 12 = CA RTK 17 = NJ RTK 3 = ACGIH A2...
  • Page 79 Product Name: MOBIL ALMO 525 Revision Date: 19Jul2007 Page 9 of 9 ______________________________________________________________________________________________________________________ affiliates in which they directly or indirectly hold any interest. ----------------------------------------------------------------------------------------------------------------------------------------------------- Internal Use Only MHC: 0, 0, 0, 0, 0, 1 PPEC: DGN: 2008031XUS (545270) ----------------------------------------------------------------------------------------------------------------------------------------------------- Copyright 2002 Exxon Mobil Corporation, All rights reserved P/N 100242, Rev.
  • Page 80 Product Name: Nook Industries PAG-1 Grease (Part number NLU-1001) Revision Date: 23 Sept 2013 Page 1 of 8 MATERIAL SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT Product Name: Omniguard MSDS Number: 778589 Intended Use: Lubricating Grease COMPANY INDENTIFICATION Supplier Nook Industries 4950 East 49...
  • Page 81 Product Name: Nook Industries PAG-1 Grease (Part number NLU-1001) Revision Date: 23 Sept 2013 Page 2 of 8 SECTION 4 FIRST AID MEASURES Eye Contact: For direct contact, remove contact lenses if present and easy to do. Immediately hold eyelids apart and flush the affected eye(s) with clean water for at least 15 minutes. Seek immediate medical attention.
  • Page 82 Product Name: Nook Industries PAG-1 Grease (Part number NLU-1001) Revision Date: 23 Sept 2013 Page 3 of 8 SECTION 6 ACCIDENTAL RELEASE MEASURES Personal Precautions: This material may burn, but will not ignite readily. Keep all sources of ignition away from spill/release. Stay upwind and away from spill/release. Avoid direct contact with material. For larges spillages, notify persons down wind of the spill/release, isolate immediate hazard area and keep unauthorized personnel out.
  • Page 83 Product Name: Nook Industries PAG-1 Grease (Part number NLU-1001) Revision Date: 23 Sept 2013 Page 4 of 8 SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION COMPONENT US-ACGIH OSHA OTHER Lubricant Base Oil TWA: 5mg/m TWA: 5 mg/m (Petroleum) STEL: 10 mg/m as Oil Mist, if generated as Oil Mist, if generated NOTE:...
  • Page 84 Product Name: Nook Industries PAG-1 Grease (Part number NLU-1001) Revision Date: 23 Sept 2013 Page 5 of 8 Evaporation Rate (nBuAc=1): <1 464°F / 240°C Flash Point: Test Method: Cleveland Open Cup (COC), ASTM D92 Lower Explosive Limits (vol % in air): No data Upper Explosive Limits (vol % in air): No data...
  • Page 85 Product Name: Nook Industries PAG-1 Grease (Part number NLU-1001) Revision Date: 23 Sept 2013 Page 6 of 8 Persistence and degradability: The base oil constituents of greases are expected to be inherently, but no readily biodegradable. Some of the thickening agents may be readily biodegradable. Bioaccumulation Potential: Log Kow values measured for the hydrocarbon components of this material range from 4 to over 6, and therefore regarded as having the potential to bioaccumulate.
  • Page 86 Product Name: Nook Industries PAG-1 Grease (Part number NLU-1001) Revision Date: 23 Sept 2013 Page 7 of 8 SECTION 15 REGULATORY INFORMATION CERCLA/SARA Section 302 Extremely Hazardous Substances and TPQs (in pounds): This material does not contain any chemicals subject to the reporting requirements of SARA 302 and 40 CFR 372.
  • Page 87 Product Name: Nook Industries PAG-1 Grease (Part number NLU-1001) Revision Date: 23 Sept 2013 Page 8 of 8 SECTION 16 OTHER INFORMATION Date of Issue: 06-Aug-2010 Status: FINAL Previous Issue Date: 27-Aug-2007 778589 MSDS Number: Guide to Abbreviations: ACGIH = American Conference of Governmental Industrial Hygienists CASRN = Chemical Abstracts Service Registry Number CEILING = Ceiling Limit (15 minutes) CERCLA = The Comprehensive Environmental Response, Compensation, and Liability Act...
  • Page 88 Material Safety Data Sheet 1 - Chemical Product and Company Identification Manufacturer: WD-40 Company Address: 1061 Cudahy Place (92110) Chemical Name: Organic Mixture P.O. Box 80607 San Diego, California, USA Trade Name: WD-40 Aerosol 92138 –0607 Telephone: Product Use: Lubricant, Penetrant, Drives Out Emergency only: 1-888-324-7596 (PROSAR) Moisture, Removes and Protects Surfaces...
  • Page 89 Inhalation (Breathing): If irritation is experienced, move to fresh air. Get medical attention if irritation or other symptoms develop and persist. 5 – Fire Fighting Measures Extinguishing Media: Use water fog, dry chemical, carbon dioxide or foam. Do not use water jet or flooding amounts of water.
  • Page 90 Skin Protection: Wear chemical resistant gloves. Respiratory Protection: None required if ventilation is adequate. If the occupational exposure limits are exceeded, wear a NIOSH approved respirator. Respirator selection and use should be based on contaminant type, form and concentration. Follow OSHA 1910.134, ANSI Z88.2 and good Industrial Hygiene practice. Work/Hygiene Practices: Wash with soap and water after handling.
  • Page 91 15 – Regulatory Information U.S. Federal Regulations: CERCLA 103 Reportable Quantity: This product is not subject to CERCLA reporting requirements, however, oil spills are reportable to the National Response Center under the Clean Water Act and many states have more stringent release reporting requirements. Report spills required under federal, state and local regulations.

Table of Contents