Truss beam in tube-coupler
anchorage
ERECTION PLAN OF HORIZONTAL BEAMS
For buildings under construction with framed structures in reinforced
concrete or steel, or for building maintenance with large areas of glass,
it is not possible to distribute the anchorages uniformly on the façade
of the scaffolding. In such cases, truss beams in tube-couplers can be
used laid out horizontally or vertically on the inside of the scaffolding
framework in such a way as to disperse the wind pressure on to the
anchorages at the end of the truss beams only.
ERECTION PLAN OF VERTICAL BEAMS
Truss beams can be erected on every bay or on alternate bays to act as
loads.
Truss beams can be mounted on alternating piers or on all the piers to
act as loads, and especially depending on whether or not metal ledger
boards are present on each bay acting as braces and, therefore, as hori-
zontal load distributors.
Typical anchorage
Instruction manual
43
Prefabricated frames
•
Typical anchorage