Download Print this page

Livorsi Single Ignition Key Pad Quick Start Instruction

Advertisement

Quick Links

Standard Operation Code:
The starter key pad uses a "Generic" pass code to operate the key
pads functions of arming the ignition, accessory, and starting
function. The "Generic" factory preset default code is #6543.
Basic Key Pad Operation:
1.
Push the ON button once (a RED indicator light will illuminate)
2.
Enter the Generic pass code #6543 ( a GREEN indicator light will flash) and the accessory
provision will now be activated and provide power at this time.
3.
Push and hold #1 button to engage the ignition starting function of the engine. This turns the
ignition on and powers the starter (the light will flash RED/GREEN while starting) hold the #1 button
until the engine starts (the light will switch to an illuminated solid GREEN color when the engine has
started).
4.
You can temporarily turn OFF the engine by pushing the #4 button. This will shut the ignition power
off, but keeps the key pad armed in the "ON" position as to provide a restart function to the engine
without having to reenter the generic pass code again. To restart the engine push the #1 button again
and it will turn on the ignition and actuate the starting of the engine again.
5.
To turn the engine and ignition OFF completely simply push the OFF button once, this shuts off all
accessory and ignition power from the key pad, you will now have to re-enter the generic pass code
#6543 to turn the key pad back on.
6. To stop the engine and lock the key pad simply push the OFF button at anytime.
Personalization of the Key Pad Operating Code:
There is a provision to change the factory preset Generic Pass code listed above ( #6543) to your own
private security pass code, which can be chosen by you in a range of 2-6 digits in length. This is a process
that requires you to READ ALL OF THE INSTRUCTIONS PRIOR to attempting this procedure as the process
must happen in order of sequence.
Single Ignition Key Pad Start Instructions
715 Center Street
Grayslake IL 60030
P: 847-752-2700
F: 847-752-2415
E: info@livorsi.com
W: www.livorsi.com
Page 1 of 4

Advertisement

loading

Summary of Contents for Livorsi Single Ignition Key Pad

  • Page 1 P: 847-752-2700 F: 847-752-2415 E: info@livorsi.com W: www.livorsi.com Single Ignition Key Pad Start Instructions Standard Operation Code: The starter key pad uses a “Generic” pass code to operate the key pads functions of arming the ignition, accessory, and starting function. The “Generic” factory preset default code is #6543.
  • Page 2 Getting Your Key Pads Identification Number In order to change the personal pass code you will need to get your key pad’s 6 digit Identification number. **STOP and get a pen** you will need to pay close attention and write down the upcoming selected numbers.
  • Page 3 Changing The Generic Pass Code To Your Personal Pass Code Building The New Programming Code: You will need to build the new programming code in order to program this unit. The new code is 14 digits long. Establish this complete code first before attempting programming *EXAMPLE* PROGRAM CODE 1 6 6 2 4 3...
  • Page 4 Single Ignition Key Pad Start Part # SEKPS 2 5/8” Cutout 2 3/4” Overall Wiring Color Designation: Yellow w/ red stripe = Starter solenoid Purple = Ignition 12v Black = Ground Red = Battery 12v Blue w/ Red stripe = Accessory...